WinEMP - NRI
WinEMP - NRI
WinEMP - NRI
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>WinEMP</strong> – G-13.mft CONFIGURATION – FOR PARALLEL INTERFACE (TOTALIZER)<br />
Configure credit dwell time<br />
Use this function to specify how long the totalizer is supposed to store a<br />
credit which has not been honoured since the last coin insertion, before the<br />
totalizer returns to sleep mode (battery protection).<br />
To set the credit dwell time:<br />
1 Select menu item EXTRA and then OPTIONS.<br />
The dialog box BASIC SETTINGS AND OPTIONS opens.<br />
2 In the "table of<br />
contents" on<br />
the left-hand<br />
side, select<br />
the index word<br />
WAKE-UP<br />
FUNCTION.<br />
3 On the righthand<br />
side,<br />
enter the<br />
desired CREDIT<br />
DWELL TIME<br />
using the<br />
keyboard.<br />
National Rejectors, Inc. GmbH, Buxtehude<br />
The credit dwell time can be 1 to 25 min. and is converted into<br />
0.5-min. increments (default setting: 5 min.).<br />
If the input field remains empty (no setting), the function is<br />
activated, i.e. the credit will not be erased.<br />
4 Confirm your entry with OK and close the window again or proceed<br />
to the next setting in this dialog box first and confirm all your settings<br />
later.<br />
5 Click BACK to store the setting in the G-13.mft or proceed to the next<br />
setting on this screen and store all your settings later.<br />
89