WinEMP - NRI
WinEMP - NRI
WinEMP - NRI
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CONFIGURATION – FOR PARALLEL INTERFACE (TOTALIZER)<br />
Configure wake-up time<br />
88<br />
<strong>WinEMP</strong> – G-13.mft<br />
For coin validators, that work with a wake-up sensor and for which the wakeup<br />
function is activated, you can set a period of time specifying how long the<br />
validator will continue to remain switched on since the vending operation<br />
was terminated (wake-up time). After the wake-up time has elapsed the<br />
validator switches off automatically and must be "woken up" again by<br />
inserting a coin.<br />
To set the wake-up time:<br />
1 Select menu item EXTRA and then OPTIONS.<br />
The dialog box BASIC SETTINGS AND OPTIONS opens.<br />
2 In the "table of<br />
contents" on<br />
the left-hand<br />
side, select<br />
the index word<br />
WAKE-UP<br />
FUNCTION.<br />
3 On the righthand<br />
side,<br />
enter the<br />
desired WAKE-<br />
UP TIME using<br />
the keyboard.<br />
The wake-up time can be 0.5 to 127 sec. and is converted into<br />
0.5-sec. increments (default setting: 3.5 sec.).<br />
4 Confirm your entry with OK and close the window again or proceed<br />
to the next setting in this dialog box first and confirm all your settings<br />
later.<br />
5 Click BACK to store the setting in the G-13.mft or proceed to the next<br />
setting on this screen and store all your settings later.<br />
National Rejectors, Inc. GmbH, Buxtehude