WinEMP - NRI

WinEMP – G-13.mft CONFIGURATION – FOR PARALLEL INTERFACE (TOTALIZER)
Deactivate/activate wake-up function
(only G-13.mft with wake-up sensor)
If you want to use the G-13.mft no longer for battery or low-power applications
but for mains applications, it is possible to deactivate the wake-up function:
1 Select menu item EXTRA and then OPTIONS.
The dialog box BASIC SETTINGS AND OPTIONS opens.
2 In the "table of
contents" on
the left-hand
side, select
the index word
WAKE-UP
FUNCTION.
3 On the righthand
side,
click USE
WAKE-UP
SENSOR
(remove tick).
If you click
again the tick would be set and the wake-up function would be
activated.
4 Confirm your entry with OK and close the window again or proceed
to the next setting in this dialog box first and confirm all your settings
later.
5 Click BACK to store the setting in the G-13.mft or proceed to the next
setting on this screen and store all your settings later.
National Rejectors, Inc. GmbH, Buxtehude
87