WinEMP - NRI
WinEMP - NRI
WinEMP - NRI
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>WinEMP</strong> – G-13.mft CONFIGURATION – FOR PARALLEL INTERFACE (TOTALIZER)<br />
Configure sorting<br />
If an external sorting device is connected to the coin validator, the following<br />
settings must be performed in <strong>WinEMP</strong>:<br />
• which sorting control line is to be used to actuate a sorting chute for<br />
the purpose of sorting a specific coin and<br />
• in which period of time is the sorting process to be carried out.<br />
Assign sorting control line to a coin type<br />
If an external sorting device is connected to the coin validator, you can assign<br />
the coin types to be sorted one of three sorting control lines or the return<br />
signal line.<br />
1 In the line of the respective coin channel under the heading<br />
"SORT R 3 2 1" tick the desired sorting control line 1–3 or return signal<br />
line R by clicking on the box and, if necessary,<br />
2 remove the tick set under any other line by clicking the box.<br />
National Rejectors, Inc. GmbH, Buxtehude<br />
To ensure that the return signal line can be selected for external<br />
sorting it has to be enabled (see section "Enable return signal line<br />
for sorting" in this chapter).<br />
The G-13.mft can then neither send a return signal to the<br />
machine when the return lever/button is operated nor send a<br />
wake-up signal.<br />
3 Click BACK to store the setting in the G-13.mft or proceed to the next<br />
setting on this screen and store all your settings later.<br />
83