WinEMP - NRI

WinEMP – G-13.mft CONFIGURATION – FOR PARALLEL INTERFACE (TOTALIZER)
Select and activate bonus coins
If a discount is to be granted on two certain coin types, these coins A and B
can be specified as bonus coins in WinEMP. Use the lower switching block
on the totalizer to assign a certain number of games to these coins:
National Rejectors, Inc. GmbH, Buxtehude
If bonus coins are configured, the "bonus level" option must be
deactivated (default setting), so that the totalizer knows that it has
to value bonus coins and no bonus levels.
1 Select the desired bonus coin A or B from the pull-down menu in the
line of the respective coin channel under the heading BON.
In order to assure, that the other discount option "bonus levels" is not
acitvated:
2 Select menu item EXTRA and then OPTIONS.
The dialog box BASIC SETTINGS AND OPTIONS opens.
3 In the "table of
contents" on
the left-hand
side, select
the index word
TOTALIZER
FUNCTIONS.
On the righthand
side
BONUS LEVELS
must not be
activated.
4 If necessary,
deactivate BO-
NUS LEVELS (no tick).
As the "timed output" function is also set using the lower
switching block on the device, this function must not be active
either (without a tick).
5 Confirm your entry with OK and close the window again or proceed
to the next setting in this dialog box first and confirm all your settings
later.
6 Click BACK to store the setting in the G-13.mft or proceed to the next
setting on this screen and store all your settings later.
77