WinEMP - NRI

CONFIGURATION – FOR PARALLEL INTERFACE (TOTALIZER)
Configure discounts (only TV totalizer)
Activate bonus levels
76
WinEMP – G-13.mft
For the TV totalizer operation, you can either grant a discount for specific
coin types (bonus coins) or grant a discount starting from a specific credit
(bonus levels).
If you do not want to restrict the customer to a specific coin for a discount,
you can configure two bonus levels A and B instead of bonus coins using the
totalizer's lower switching block. These bonus levels must be activated in
WinEMP, so that the totalizer knows that it has to value bonus levels and no
bonus coins:
1 Select menu item EXTRA and then OPTIONS.
The dialog box BASIC SETTINGS AND OPTIONS opens.
2 In the "table of
contents" on
the left-hand
side, select the
index word
TOTALIZER
FUNCTIONS.
3 On the righthand
side
activate (tick)
BONUS LEVELS.
Clicking again
would remove
the tick and the
discount setting of the lower switching block is taken as setting for bonus
coins.
As the "timed output" function is also set using the lower
switching block on the device, this function must not be active
(without a tick).
4 Confirm your entry with OK and close the window again or proceed
to the next setting in this dialog box first and confirm all your settings
later.
5 Click BACK to store the setting in the G-13.mft or proceed to the next
setting on this screen and store all your settings later.
National Rejectors, Inc. GmbH, Buxtehude