WinEMP - NRI
WinEMP - NRI
WinEMP - NRI
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CONFIGURATION – FOR PARALLEL INTERFACE (TOTALIZER)<br />
Activate on-request mode (only timer/TV totalizer)<br />
74<br />
<strong>WinEMP</strong> – G-13.mft<br />
If the vending operation is not to be triggered automatically after the credit<br />
has reached the price, but only after the customer has pressed a start<br />
button:<br />
1 Select menu item EXTRA and then OPTIONS.<br />
The dialog box BASIC SETTINGS AND OPTIONS opens.<br />
2 In the "table of<br />
contents" on<br />
the left-hand<br />
side, select<br />
the index word<br />
TOTALIZER<br />
FUNCTIONS.<br />
3 On the righthand<br />
side<br />
activate (tick)<br />
the ON-<br />
REQUEST MODE.<br />
Clicking again<br />
would delete<br />
the tick and trigger the vending operation automatically after the credit<br />
has reached the price.<br />
4 Confirm your entry with OK and close the window again or proceed<br />
to the next setting in this dialog box first and confirm all your settings<br />
later.<br />
5 Click BACK to store the setting in the G-13.mft or proceed to the next<br />
setting on this screen and store all your settings later.<br />
For standard timer and TV totalizer:<br />
By default the on-request mode is started using the common inhibit<br />
line (pin 2). Alternatively, you can set that it will be started using the<br />
reset line (pin 8) (see section "Special functions using the signal<br />
lines" in this chapter).<br />
For ECV timer and TV totalizer:<br />
By default the on-request mode is started using the common inhibit/<br />
reset line (pin 6). Alternatively, you can set that it will be started<br />
using the separate request line (pin 5) (see section "Special<br />
functions using the signal lines" in this chapter).<br />
National Rejectors, Inc. GmbH, Buxtehude