WinEMP - NRI
WinEMP - NRI
WinEMP - NRI
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>WinEMP</strong> – G-13.mft CONFIGURATION – FOR PARALLEL INTERFACE (TOTALIZER)<br />
Configure coin value/token identification<br />
If you have taught a new coin/token in a coin channel, it will now be assigned<br />
a certain coin value/token identification which is to be added to the credit by<br />
the totalizer.<br />
National Rejectors, Inc. GmbH, Buxtehude<br />
The coin value must be a multiple of the smallest coin value<br />
configured; otherwise the smallest coin value must be<br />
adapted accordingly. For this, please simply follow the help<br />
buttons and queries automatically generated by <strong>WinEMP</strong> (see<br />
also section "Configure the smallest coin value as a basis of<br />
calculation for coin values and prices" in this chapter)!<br />
1 In the line of the respective coin channel, use the keyboard to enter<br />
the desired coin value or a token identification ("TK=1" for the value of<br />
the 1 st price set/"TK=2" for the value of the 2 nd price set) under the<br />
heading CV.<br />
2 Click BACK to store the setting in the G-13.mft or proceed to the next<br />
setting on this screen and store all your settings later.<br />
Define attraction time of the acceptance gate and display<br />
pre-magnetization/coin acceptance time and time periods of the<br />
accepted coin sensor<br />
The attraction time determines how long the solenoid of the acceptance gate<br />
is supposed to attract so that the gate will open and the inserted coins can<br />
be directed into the cash-box. Usually, the solenoid is attracting only as long<br />
as the coin has been accepted, i.e. the coin has passed the CP3 sensor.<br />
There are three different phases<br />
• pre-magnetization time<br />
The solenoid is fully controlled in order to open the gate.<br />
• actual attraction time<br />
Solenoid control is timed (to conserve energy) in order to keep the<br />
gate open.<br />
• coin acceptance time<br />
Time after closing the acceptance gate which is available for the<br />
accepted coin sensors<br />
This section merely describes how to set the actual attraction time.<br />
Pre-magnetization time, coin acceptance time as well as the CP3/<br />
CP4 time periods of the accepted coin sensor are only displayed for<br />
diagnostic purposes.<br />
69