WinEMP - NRI

CONFIGURATION – FOR PARALLEL INTERFACE (TOTALIZER)
68
WinEMP – G-13.mft
Configure the smallest coin value as a basis of calculation for coin values
and prices
For the totalizer, the smallest coin value is the reference value for datamanaging
all programmed coin values and prices. The values of all the coin
types accepted by the totalizer as well as the price(s) set must be integral
multiples of the smallest coin value.
If the smallest coin value is changed, the coin values of the
channels and the prices set using the switching block may
also have to be changed accordingly!
WinEMP will mark these coin values in red for you. For
changing the values, please simply follow the queries
automatically generated by WinEMP (see also section
"Configure coin value/token identification" in this chapter).
When you have taught a new coin in a coin channel which is smaller than
the smallest coin value configured so far, or if you want to set a price which
cannot be divided by the smallest coin value currently set, the smallest coin
value must be changed as a basis of calculation for the totalizer:
1 Select menu item EXTRA and then BASIC SETTINGS.
The dialog box BASIC SETTINGS AND OPTIONS opens.
2 In the "table of
contents" on
the left-hand
side, select the
index word
SMALLEST
COIN VALUE.
3 On the righthand
side enter
the desired
SMALLEST COIN
VALUE using the
keyboard.
4 Confirm your entry with OK and close the window again or proceed
to the next setting in this dialog box first and confirm all your settings
later.
5 Click BACK to store the setting in the G-13.mft or proceed to the next
setting on this screen and store all your settings later.
National Rejectors, Inc. GmbH, Buxtehude