WinEMP - NRI

WinEMP – G-13.mft CONFIGURATION – FOR PARALLEL INTERFACE (VALIDATOR)
Select Casino or standard operation
You can use DIL switch S1.9 to select operating mode "Casino" or "standard"
on site. With WinEMP you can disable this switch so that the mode of
operation cannot be changed over unintentionally. For this case you can
select the operating mode in WinEMP.
If you want to use a G-13.mft with parallel interface in Casino or standard
operation:
1 On the "Settings" screen, select menu item EXTRA and then
OPTIONS.
The dialog box BASIC SETTINGS AND OPTIONS opens.
2 In the "table of
contents" on
the left-hand
side, select the
index word
CASINO.
The following settings are possible:
"Casino" or "Standard" mode of operation to
be selected via DIL switch S1.9
Mode of operation no longer selectable via DIL
switch S1.9, "Casino" mode of operation
selected via WinEMP
Mode of operation no longer selectable via DIL
switch S1.9, "Standard" mode of operation
selected via WinEMP
3 On the right-hand side, click on (tick) the upper box if you want the
"Casino" or "Standard" mode of operation to be selected via the DIL
switch on the device.
Clicking again would delete the tick and disable the switch.
4 If necessary, select Casino/sandard operation by clicking on the
lower box (set/remove tick), if DIL switch S1.9 is disabled.
National Rejectors, Inc. GmbH, Buxtehude
65