WinEMP - NRI
WinEMP - NRI
WinEMP - NRI
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>WinEMP</strong> – G-13.mft CONFIGURATION – FOR PARALLEL INTERFACE (VALIDATOR)<br />
Configure wake-up time<br />
For coin validators, that work with a wake-up sensor and for which the wakeup<br />
function is activated, you can set a period of time specifying how long the<br />
validator will continue to remain switched on since the last coin insertion<br />
(wake-up time). After the wake-up time has elapsed the validator switches<br />
off automatically and must be "woken up" again by inserting a coin.<br />
To set the wake-up time:<br />
1 Select menu item EXTRA and then OPTIONS.<br />
The dialog box BASIC SETTINGS AND OPTIONS opens.<br />
2 In the "table of<br />
contents" on<br />
the left-hand<br />
side, select<br />
the index word<br />
WAKE-UP<br />
FUNCTION.<br />
3 On the righthand<br />
side,<br />
enter the<br />
desired WAKE-<br />
UP TIME using<br />
the keyboard.<br />
National Rejectors, Inc. GmbH, Buxtehude<br />
The wake-up time can be 0.5 to 127 sec. and is converted into<br />
0.5-sec. increments (default setting: 3.5 sec.).<br />
4 Confirm your entry with OK and close the window again or proceed<br />
to the next setting in this dialog box first and confirm all your settings<br />
later.<br />
5 Click BACK to store the setting in the G-13.mft or proceed to the next<br />
setting on this screen and store all your settings later.<br />
63