WinEMP - NRI
WinEMP - NRI
WinEMP - NRI
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CONFIGURATION – FOR PARALLEL INTERFACE (VALIDATOR)<br />
Deactivate/activate wake-up function<br />
(only G-13.mft with wake-up sensor)<br />
62<br />
<strong>WinEMP</strong> – G-13.mft<br />
If you want to use the G-13.mft no longer for battery or low-power applications<br />
but for mains applications, it is possible to deactivate the wake-up function:<br />
1 Select menu item EXTRA and then OPTIONS.<br />
The dialog box BASIC SETTINGS AND OPTIONS opens.<br />
2 In the "table of<br />
contents" on<br />
the left-hand<br />
side, select<br />
the index word<br />
WAKE-UP<br />
FUNCTION.<br />
3 On the righthand<br />
side,<br />
click USE<br />
WAKE-UP<br />
SENSOR<br />
(remove tick).<br />
If you click<br />
again the tick would be set and the wake-up function would be<br />
activated.<br />
4 Confirm your entry with OK and close the window again or proceed<br />
to the next setting in this dialog box first and confirm all your settings<br />
later.<br />
5 Click BACK to store the setting in the G-13.mft or proceed to the next<br />
setting on this screen and store all your settings later.<br />
National Rejectors, Inc. GmbH, Buxtehude