WinEMP - NRI
WinEMP - NRI WinEMP - NRI
CONFIGURATION – FOR PARALLEL INTERFACE (VALIDATOR) Do not transmit return signal 60 WinEMP – G-13.mft The coin validator can be set so that no return signal is transmitted to the vending machine when the return lever/button is pressed. If the return signal line is used for external sorting, coin acceptance (Casino operation) or the wake-up function, a return signal is never transmitted. 1 Select menu item EXTRA and then OPTIONS. The dialog box BASIC SETTINGS AND OPTIONS opens. 2 In the "table of contents" on the left-hand side, select the index word RETURN SIGNAL. 3 On the righthand side, click on the box (remove tick). If you click on the box again the tick would be set and a return signal would be sent to the vending machine. 4 Confirm your entry with OK and close the window again or proceed to the next setting in this dialog box first and confirm all your settings later. 5 Click BACK to store the setting in the G-13.mft or proceed to the next setting on this screen and store all your settings later. National Rejectors, Inc. GmbH, Buxtehude
WinEMP – G-13.mft CONFIGURATION – FOR PARALLEL INTERFACE (VALIDATOR) Accepted coin signal via return signal line (only for Casino operation) Since the Casino model does not exploit the function of the accepted coin sensors due to quick coin acceptance, the return signal line can be used to transmit an accepted coin signal to the machine. National Rejectors, Inc. GmbH, Buxtehude The G-13.mft can then neither send a return signal to the machine when the return lever/button is operated nor use the return signal line to sort coins or wake the machine. 1 Select menu item EXTRA and then OPTIONS. The dialog box BASIC SETTINGS AND OPTIONS opens. 2 In the "table of contents" on the left-hand side, select the index word CASINO. 3 Click on (tick) the box on the right-hand side. If you click on the box again the tick would be deleted and the return signal line would not transmit an accepted coin signal. 4 Confirm your entry with OK and close the window again or proceed to the next setting in this dialog box first and confirm all your settings later. 5 Click BACK to store the setting in the G-13.mft or proceed to the next setting on this screen and store all your settings later. 61
- Page 9 and 10: WinEMP - G-13.mft GENERAL INFORMATI
- Page 11 and 12: WinEMP - G-13.mft GENERAL INFORMATI
- Page 13 and 14: WinEMP - G-13.mft GENERAL INFORMATI
- Page 15 and 16: WinEMP - G-13.mft 3 Installation In
- Page 17 and 18: WinEMP - G-13.mft INSTALLATION 7 Pl
- Page 19 and 20: WinEMP - G-13.mft Start WinEMP Nati
- Page 21 and 22: WinEMP - G-13.mft National Rejector
- Page 23 and 24: WinEMP - G-13.mft General operating
- Page 25 and 26: WinEMP - G-13.mft GENERAL PROGRAM S
- Page 27 and 28: WinEMP - G-13.mft National Rejector
- Page 29 and 30: WinEMP - G-13.mft Perform tests Nat
- Page 31 and 32: WinEMP - G-13.mft Select memory blo
- Page 33 and 34: WinEMP - G-13.mft National Rejector
- Page 35 and 36: WinEMP - G-13.mft 8 Configuration N
- Page 37 and 38: WinEMP - G-13.mft G-13.mft with MDB
- Page 39 and 40: WinEMP - G-13.mft National Rejector
- Page 41 and 42: WinEMP - G-13.mft National Rejector
- Page 43 and 44: WinEMP - G-13.mft Teach coin types/
- Page 45 and 46: WinEMP - G-13.mft National Rejector
- Page 47 and 48: WinEMP - G-13.mft CONFIGURATION - F
- Page 49 and 50: WinEMP - G-13.mft CONFIGURATION - F
- Page 51 and 52: WinEMP - G-13.mft CONFIGURATION - F
- Page 53 and 54: WinEMP - G-13.mft CONFIGURATION - F
- Page 55 and 56: WinEMP - G-13.mft CONFIGURATION - F
- Page 57 and 58: WinEMP - G-13.mft CONFIGURATION - F
- Page 59: WinEMP - G-13.mft CONFIGURATION - F
- Page 63 and 64: WinEMP - G-13.mft CONFIGURATION - F
- Page 65 and 66: WinEMP - G-13.mft CONFIGURATION - F
- Page 67 and 68: WinEMP - G-13.mft CONFIGURATION - F
- Page 69 and 70: WinEMP - G-13.mft CONFIGURATION - F
- Page 71 and 72: WinEMP - G-13.mft CONFIGURATION - F
- Page 73 and 74: WinEMP - G-13.mft CONFIGURATION - F
- Page 75 and 76: WinEMP - G-13.mft CONFIGURATION - F
- Page 77 and 78: WinEMP - G-13.mft CONFIGURATION - F
- Page 79 and 80: WinEMP - G-13.mft CONFIGURATION - F
- Page 81 and 82: WinEMP - G-13.mft CONFIGURATION - F
- Page 83 and 84: WinEMP - G-13.mft CONFIGURATION - F
- Page 85 and 86: WinEMP - G-13.mft CONFIGURATION - F
- Page 87 and 88: WinEMP - G-13.mft CONFIGURATION - F
- Page 89 and 90: WinEMP - G-13.mft CONFIGURATION - F
- Page 91 and 92: WinEMP - G-13.mft CONFIGURATION - F
- Page 93 and 94: WinEMP - G-13.mft CONFIGURATION - F
- Page 95 and 96: WinEMP - G-13.mft CONFIGURATION - F
- Page 97 and 98: WinEMP - G-13.mft CONFIGURATION - F
- Page 99 and 100: WinEMP - G-13.mft CONFIGURATION - F
- Page 101 and 102: WinEMP - G-13.mft CONFIGURATION - F
- Page 103 and 104: WinEMP - G-13.mft CONFIGURATION - F
- Page 105 and 106: WinEMP - G-13.mft CONFIGURATION - F
- Page 107 and 108: WinEMP - G-13.mft CONFIGURATION - F
- Page 109 and 110: WinEMP - G-13.mft CONFIGURATION - F
<strong>WinEMP</strong> – G-13.mft CONFIGURATION – FOR PARALLEL INTERFACE (VALIDATOR)<br />
Accepted coin signal via return signal line (only for Casino operation)<br />
Since the Casino model does not exploit the function of the accepted coin<br />
sensors due to quick coin acceptance, the return signal line can be used to<br />
transmit an accepted coin signal to the machine.<br />
National Rejectors, Inc. GmbH, Buxtehude<br />
The G-13.mft can then neither send a return signal to the<br />
machine when the return lever/button is operated nor use the<br />
return signal line to sort coins or wake the machine.<br />
1 Select menu item EXTRA and then OPTIONS.<br />
The dialog box BASIC SETTINGS AND OPTIONS opens.<br />
2 In the "table of<br />
contents" on<br />
the left-hand<br />
side, select the<br />
index word<br />
CASINO.<br />
3 Click on (tick)<br />
the box on the<br />
right-hand side.<br />
If you click on<br />
the box again<br />
the tick would<br />
be deleted and<br />
the return<br />
signal line would not transmit an accepted coin signal.<br />
4 Confirm your entry with OK and close the window again or proceed<br />
to the next setting in this dialog box first and confirm all your settings<br />
later.<br />
5 Click BACK to store the setting in the G-13.mft or proceed to the next<br />
setting on this screen and store all your settings later.<br />
61