WinEMP - NRI

CONFIGURATION – FOR PARALLEL INTERFACE (VALIDATOR)
Assign external individual inhibit signal line to a coin type
54
WinEMP – G-13.mft
As an alternative to inhibiting coin types/groups using the DIL switches or
using the coin validator software, up to six different coin types can be
inhibited from the vending machine via the external individual inhibit signal
lines. To ensure that the coin validator knows which coin type is to be
inhibited via which one of the six signal lines, a signal line must be assigned
to the coin type to be inhibited:
1 In the line of the respective coin channel under the heading INHIBIT 6–1
tick the desired line by clicking the box and, if necessary,
2 remove the tick set under any other line by clicking the box.
For inhibiting in groups assign all the relevant coin types (e.g. of a
currency) to the same line.
3 Click BACK to store the setting in the G-13.mft or proceed to the next
setting on this screen and store all your settings later.
National Rejectors, Inc. GmbH, Buxtehude