WinEMP - NRI
WinEMP - NRI
WinEMP - NRI
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CONFIGURATION – FOR PARALLEL INTERFACE (VALIDATOR)<br />
Inhibit coin types<br />
52<br />
<strong>WinEMP</strong> – G-13.mft<br />
If specific coins are no longer to be accepted for payment at the vending<br />
machine, your coin channels can either be<br />
• deactivated on a long-term basis using the coin validator software,<br />
• assigned to a DIL switch, which can be used to inhibit the coin<br />
channels on a flexible basis on site (only with single block datamanagement)<br />
or<br />
• assigned to an external inhibit signal line, which can be used to inhibit<br />
the coin channels using the vending machine.<br />
Activate or deactivate coin types using coin validator software<br />
If individual coin types are to be inhibited in the long term or if certain coin<br />
types have already been configured by the manufacturer but are inhibited<br />
because they have so far not been required (number of the coin channel<br />
marked with a red bar), you have the option of deactivating or activating the<br />
respective coin channels internally using the coin validator software.<br />
The coin channels deactivated using the coin validator software<br />
cannot be re-enabled on the device or using the vending machine<br />
but can only be re-enabled using the configuration software<br />
<strong>WinEMP</strong>.<br />
1 In the line of the respective coin channel under the heading "X", click<br />
on the box.<br />
A tick is set or deleted (tick = coin type deactivated, no tick = coin<br />
type activated, and the channel number is marked in red or is no<br />
longer marked).<br />
By clicking on the box again, you can cancel the entry.<br />
2 Click BACK to store the setting in the G-13.mft or proceed to the next<br />
setting on this screen and store all your settings later.<br />
National Rejectors, Inc. GmbH, Buxtehude