WinEMP - NRI
WinEMP - NRI WinEMP - NRI
CONFIGURATION – FOR PARALLEL INTERFACE (VALIDATOR) Configure G-13.mft for parallel validator operation Store changes in coin validator and return to main menu 46 WinEMP – G-13.mft This section describes all setting options for the standard and Casino model of the G-13.mft with parallel interface. The next subchapter describes how to configure the G-13.mft totalizer. In this section you find how to perform settings for: • coin signals, • acceptance gate, • accepted coin sensors, • coin inhibit, • teach mode, • coin sorting, • coin rejection, and • wake-up sensor (optional) Configure channelsuperordinate data: coin impulse length, attraction time of acceptance gate, accepted coin sensors, teach mode, Copy, insert, and sorting, delete channel data; coin rejection, name coin wake-up function Simulation for inhibiting via DIL switches Assign sorting control line Assign DIL switch (inhibit) only for single block data-management Assign coin impulse number Assign coin signal line Configure channel-specific data Assign external inhibit signal line National Rejectors, Inc. GmbH, Buxtehude Deactivate using coin validator software
WinEMP – G-13.mft CONFIGURATION – FOR PARALLEL INTERFACE (VALIDATOR) Assign coin impulse number to a coin type Every coin accepted by the coin validator passes on at least one impulse to the vending machine control system via the appropriate coin signal line. An impulse tells the vending machine control system that a coin has been accepted. For the vending machine control system to be able to distinguish between the individual coin values when there are not enough signal lines, a different number of coin impulses can be assigned to the coin types. Theoretically, you can assign 1–255 impulses per coin to the coin channel assigned to one coin. National Rejectors, Inc. GmbH, Buxtehude But: Configure the impulse number as low as possible so that coins can be accepted more quickly. If there are sufficient coin signal lines, assign an impulse and a different coin signal line or combination of signal lines to each coin type (see next section). If too many coin types have been programmed for the existing coin signal lines, assign, for example, two impulses and the same coin signal line to a 1-euro coin as for the 50-cent coin, which is transmitted with one impulse. If you want to assign a different impulse number to a coin type: 1 Use the mouse to mark the number currently displayed in the input field of the respective coin channel under the heading IMP. and 2 enter the desired number using the keyboard. 3 Click BACK to store the setting in the G-13.mft or proceed to the next setting on this screen and store all your settings later. 47
- Page 1: Technical Documentation The configu
- Page 4 and 5: TABLE OF CONTENTS 4 WinEMP - G-13.m
- Page 6 and 7: TABLE OF CONTENTS 6 WinEMP - G-13.m
- Page 9 and 10: WinEMP - G-13.mft GENERAL INFORMATI
- Page 11 and 12: WinEMP - G-13.mft GENERAL INFORMATI
- Page 13 and 14: WinEMP - G-13.mft GENERAL INFORMATI
- Page 15 and 16: WinEMP - G-13.mft 3 Installation In
- Page 17 and 18: WinEMP - G-13.mft INSTALLATION 7 Pl
- Page 19 and 20: WinEMP - G-13.mft Start WinEMP Nati
- Page 21 and 22: WinEMP - G-13.mft National Rejector
- Page 23 and 24: WinEMP - G-13.mft General operating
- Page 25 and 26: WinEMP - G-13.mft GENERAL PROGRAM S
- Page 27 and 28: WinEMP - G-13.mft National Rejector
- Page 29 and 30: WinEMP - G-13.mft Perform tests Nat
- Page 31 and 32: WinEMP - G-13.mft Select memory blo
- Page 33 and 34: WinEMP - G-13.mft National Rejector
- Page 35 and 36: WinEMP - G-13.mft 8 Configuration N
- Page 37 and 38: WinEMP - G-13.mft G-13.mft with MDB
- Page 39 and 40: WinEMP - G-13.mft National Rejector
- Page 41 and 42: WinEMP - G-13.mft National Rejector
- Page 43 and 44: WinEMP - G-13.mft Teach coin types/
- Page 45: WinEMP - G-13.mft National Rejector
- Page 49 and 50: WinEMP - G-13.mft CONFIGURATION - F
- Page 51 and 52: WinEMP - G-13.mft CONFIGURATION - F
- Page 53 and 54: WinEMP - G-13.mft CONFIGURATION - F
- Page 55 and 56: WinEMP - G-13.mft CONFIGURATION - F
- Page 57 and 58: WinEMP - G-13.mft CONFIGURATION - F
- Page 59 and 60: WinEMP - G-13.mft CONFIGURATION - F
- Page 61 and 62: WinEMP - G-13.mft CONFIGURATION - F
- Page 63 and 64: WinEMP - G-13.mft CONFIGURATION - F
- Page 65 and 66: WinEMP - G-13.mft CONFIGURATION - F
- Page 67 and 68: WinEMP - G-13.mft CONFIGURATION - F
- Page 69 and 70: WinEMP - G-13.mft CONFIGURATION - F
- Page 71 and 72: WinEMP - G-13.mft CONFIGURATION - F
- Page 73 and 74: WinEMP - G-13.mft CONFIGURATION - F
- Page 75 and 76: WinEMP - G-13.mft CONFIGURATION - F
- Page 77 and 78: WinEMP - G-13.mft CONFIGURATION - F
- Page 79 and 80: WinEMP - G-13.mft CONFIGURATION - F
- Page 81 and 82: WinEMP - G-13.mft CONFIGURATION - F
- Page 83 and 84: WinEMP - G-13.mft CONFIGURATION - F
- Page 85 and 86: WinEMP - G-13.mft CONFIGURATION - F
- Page 87 and 88: WinEMP - G-13.mft CONFIGURATION - F
- Page 89 and 90: WinEMP - G-13.mft CONFIGURATION - F
- Page 91 and 92: WinEMP - G-13.mft CONFIGURATION - F
- Page 93 and 94: WinEMP - G-13.mft CONFIGURATION - F
- Page 95 and 96: WinEMP - G-13.mft CONFIGURATION - F
CONFIGURATION – FOR PARALLEL INTERFACE (VALIDATOR)<br />
Configure G-13.mft for parallel validator operation<br />
Store changes in coin<br />
validator and return to<br />
main menu<br />
46<br />
<strong>WinEMP</strong> – G-13.mft<br />
This section describes all setting options for the standard and Casino model<br />
of the G-13.mft with parallel interface.<br />
The next subchapter describes how to configure the G-13.mft<br />
totalizer.<br />
In this section you find how to perform settings for:<br />
• coin signals,<br />
• acceptance gate,<br />
• accepted coin sensors,<br />
• coin inhibit,<br />
• teach mode,<br />
• coin sorting,<br />
• coin rejection, and<br />
• wake-up sensor (optional)<br />
Configure channelsuperordinate<br />
data:<br />
coin impulse length,<br />
attraction time of acceptance gate,<br />
accepted coin sensors,<br />
teach mode,<br />
Copy, insert, and<br />
sorting,<br />
delete channel data;<br />
coin rejection,<br />
name coin<br />
wake-up function<br />
Simulation for inhibiting via<br />
DIL switches<br />
Assign sorting<br />
control line<br />
Assign DIL switch<br />
(inhibit)<br />
only for single block<br />
data-management<br />
Assign coin<br />
impulse number<br />
Assign coin signal<br />
line<br />
Configure channel-specific data<br />
Assign external<br />
inhibit signal line<br />
National Rejectors, Inc. GmbH, Buxtehude<br />
Deactivate using<br />
coin validator<br />
software