WinEMP - NRI

WinEMP – G-13.mft
National Rejectors, Inc. GmbH, Buxtehude
CONFIGURATION
The next step will also take into account the measured values of one type of
false coins of the genuine coins previously inserted:
7 Select menu item INSERT COINS and then FALSE COINS.
The following screen message is
displayed: PLEASE INSERT AT LEAST
20 FALSE COINS OF ONE TYPE ONLY.
8 Insert at least 20 and no more than
50 false coins of one type into the
G-13.mft.
For the purpose of verification, the screen display indicates the insertion
of a coin and starts counting from 0. The coloured acceptance class can
be used to determine whether a coin has been accepted.
Only insert false coins of one coin type, e.g. only one coin
type of a foreign currency; otherwise the coin properties do
not correspond, and the measured values are so different that
they cannot be registered or falsify the adjustment.
If you do not have sufficient false coins, the same coin can also be
inserted several times. Inserting the coin the wrong way round
creates different measured values for the simulation of several
coins.
9 After inserting the last false coin, close the window by clicking
READY.
WinEMP has compared the measured values for the inserted false coins
with the saved limit values of the acceptance bands and determined what
percentage of the inserted false coins have been accepted in the respective
coin channels. The coin channels involved are provided with the appropriate
percentage value (0–100%) on the ACCEPTED button, to the right
of the slash.
41