WinEMP - NRI

CONFIGURATION
G-13.mft with cctalk interface
38
Store changes in coin
validator and return to
main menu
Coin channel number
(marked in red =
inhibited by the coin
validator)
Which coin channel
accepts which coin?
Copy, insert and
delete channel data;
name coin
Simulation for inhibiting via
DIL switches
Assign cctalk
output (1-16)
Display – cctalk
sorting way
Adjust acceptance band;
teach coin types
Assign DIL switch
(inhibit)
WinEMP – G-13.mft
Deactivate using
coin validator
software
Configure channelsuperordinate
data
Any settings made are saved in the software initially after they have been
entered. The user is asked if the data entered is to be written into the
G-13.mft when he exits the screen via the menu item BACK. By clicking on
the button YES all the new values of the screen would be saved in the coin
validator.
If certain settings need to be cancelled and old configurations
restored, a device must always be configured on the same PC
because the archive files to be loaded are saved on the hard
disk of the PC (see Chap. 10 "Restore G-13.mft settings").
National Rejectors, Inc. GmbH, Buxtehude