WinEMP - NRI
WinEMP - NRI
WinEMP - NRI
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>WinEMP</strong> – G-13.mft<br />
8 Configuration<br />
National Rejectors, Inc. GmbH, Buxtehude<br />
CONFIGURATION<br />
This chapter describes how to<br />
• optimize the acceptance of genuine coins and the rejection of false coins,<br />
• teach new coin types in coin channels,<br />
• configure the G-13.mft for parallel validator operation,<br />
• configure the G-13.mft for parallel totalizer operation,<br />
• configure the G-13.mft for MDB operation,<br />
• configure the G-13.mft for S1 operation,<br />
• configure the G-13.mft for cctalk operation,<br />
• copy and insert or delete coin channel data, and<br />
• duplicate G-13.mft data for series configuration.<br />
These settings are all made on the "Settings" screen, which<br />
you access from the main menu via the menu item<br />
SETTINGS and then EDIT.<br />
G-13.mft with parallel interface (validator operation)<br />
Store changes in coin<br />
validator and return to<br />
main menu<br />
Coin channel number<br />
(marked in red =<br />
inhibited by the coin<br />
validator)<br />
Which coin channel<br />
accepts which coin?<br />
Copy, insert and<br />
delete channel data;<br />
name coin<br />
Simulation for inhibiting via<br />
DIL switches<br />
Assign sorting<br />
control line<br />
Assign DIL switch<br />
(inhibit)<br />
Adjust acceptance band,<br />
teach coin types<br />
Assign coin impulse<br />
number<br />
Assign coin signal<br />
line<br />
Configure channelsuperordinate<br />
data<br />
Assign external<br />
inhibit signal line<br />
Deactivate using coin<br />
validator software<br />
35