03.03.2013 Views

WinEMP - NRI

WinEMP - NRI

WinEMP - NRI

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>WinEMP</strong> – G-13.mft<br />

General operating functions<br />

National Rejectors, Inc. GmbH, Buxtehude<br />

MENU STRUCTURE AND GENERAL FUNCTIONS<br />

In this section simple functions are to be explained once. These functions<br />

will not be mentioned again for the adjustment steps included in the following<br />

chapters.<br />

• The top program line shows the <strong>WinEMP</strong> version, the connected<br />

device and the activated memory block 0 or 1 (if available).<br />

• By clicking the menu item BACK you will always go – possibly after<br />

confirming/rejecting the query WRITE DATA INTO VALIDATOR? – back to the<br />

main menu.<br />

• The program can only be exited from the main menu.<br />

• Coin validator data that has been<br />

changed is written into the connected<br />

device before the user leaves the<br />

screen "Settings" via the menu item<br />

BACK and after the query WRITE DATA INTO VALIDATOR?<br />

• Each configuration stored in the device can be restored using an archive.<br />

The basic requirement for this option is that the device must always be<br />

configured on the same PC, since the archive files are stored on the hard<br />

disk of the PC.<br />

• Faulty input is displayed in red<br />

or an acoustic signal is sounded. Before<br />

the screen "Settings" is exited, the<br />

warning ENTRIES NOT CORRECT. IGNORE<br />

CHANGES? IS DISPLAYED.<br />

• Any settings <strong>WinEMP</strong> cannot read or which are faulty are identified by<br />

a question mark in the appropriate input field.<br />

• Using the menu item INFO, in the top right-hand side of the main<br />

menu, an info box with the <strong>WinEMP</strong> software version and access<br />

rights will always be displayed. You can close the window by clicking<br />

OK.<br />

• Using the button ABORT the user aborts a process and<br />

leaves the respective pop-up window.<br />

• Underlined letters in the menu bar and in the pull-down menus<br />

must be treated the same way as in Windows and stand for the key<br />

that executes specific functions when pressed before or together with<br />

the "Alt" key.<br />

• When selecting the functions<br />

using the main menu bar, the<br />

access rights of the user are<br />

checked. An info box is displayed.<br />

• Loading and testing operations are<br />

always documented in an info box by<br />

means of a status-bar indicator.<br />

23

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!