WinEMP - NRI

GLOSSARY
156
WinEMP – G-13.mft
Individual inhibit The coin validator with parallel interface is equipped with six
line signal lines via which the vending machine can inhibit the
acceptance of individual → coin types. With the aid of
WinEMP you can define which coin type is to be inhibited by
the machine via which individual inhibit line.
These bidirectional lines are used by the coin validator in the
opposite direction in order to transmit coin signals to the
vending machine.
Impulse number → Coin impulse number
Impulse length → Coin impulse length
Inhibit signal line → Common inhibit signal line
MDB Multi Drop Bus. The abbreviation defines a serial interface
specification for an internal communication protocol.
For further information on the MDB interface, please refer to
"NAMA document MDB/ICP 2.0" (www.vending.org) and the
separate operating instructions for the G-13.mft MDB/S1.
On-request mode The on-request mode can be activated for the timer or TV
totalizer operation of the G-13.mft → totalizers as default
value or using WinEMP. In this mode the signals for starting
e.g. a game are not transferred immediately after the credit
has reached the price but only after the customer has
pressed a start button.
Restore Using the menu item "Restore" → backup files saved on the
hard disk of your PC can be called up which restore any
configuration saved with WinEMP.
Return signal line When the return lever on the G-13.mft with parallel interface
is operated, a return signal is transmitted via the return signal
line to the vending machine. With the return lever is held
down, inserted coins are returned.
To protect against tampering with the → acceptance gate the
return signal line on the Casino model can be used to
transmit an accepted coin signal to the vending machine.
The accepted coin signal is independent of the coin signal.
S1 This abbreviation defines a serial, NRI-specified and
→ MDB-based interface to the vending machine.
You will find detailed information on the serial S1 interface in
the NRI S1 specification for the G-40 S1, which we will be
pleased to place at your disposal upon your request.
National Rejectors, Inc. GmbH, Buxtehude