WinEMP - NRI

142
National Rejectors, Inc. GmbH, Buxtehude
Error message Description Cause Remedy
Data block download
CONNECTED VALIDATOR
NOT FOUND
WinEMP cannot read data
block data of the connected
coin validator
NO ACCESS RIGHTS! Selecting the function "Data
block download" not possible
WRONG NUMBER! WinEMP cannot assign any file
to the data block (set) number
entered
Invalid device number or data Contact NRI
Chip card inserted does not provide
access authorization
Incorrect actual data block (set) number
entered
Incorrect new data block (set) number
entered
Repeat process with appropriately
programmed chip card
Enter correct data block set number as
shown on the label of the coin validator
(see Chap. 9 "Data block download").
To replace the same data block (set),
enter the actual data block (set)
number;
To load a different data block (set),
enter the correct data block (set)
number from the data block list (see
Chap. 9 "Data block download")
STATUS AND ERROR MESSAGES
WinEMP – G-13.mft