WinEMP - NRI
WinEMP - NRI
WinEMP - NRI
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
136<br />
National Rejectors, Inc. GmbH, Buxtehude<br />
13 Status and error messages<br />
Error message Description Cause Remedy<br />
General<br />
NO VALIDATOR<br />
CONNECTED<br />
<strong>WinEMP</strong> is searching for a<br />
connected coin validator and<br />
does not find one<br />
NO ACCESS RIGHTS Selecting a function not<br />
possible<br />
ERROR WHEN<br />
SWITCHING THE BLOCK<br />
PLEASE RETURN TO THE<br />
MAIN MENU FIRST! – FOR<br />
THIS CLICK ON OK AND<br />
THEN ON BACK<br />
Desired memory (block) is not<br />
activated<br />
In the screen "Settings",<br />
<strong>WinEMP</strong> cannot be exited using<br />
X in the upper program line<br />
Device environment not completely<br />
connected<br />
Cables or connections defective<br />
Wrong serial PC interface selected<br />
(<strong>WinEMP</strong> searches for device at first<br />
available interface)<br />
Chip card inserted does not provide<br />
access authorization<br />
<strong>WinEMP</strong> cannot read data from selected<br />
memory (block)<br />
Security when reading in and reading<br />
out the device data<br />
Connect device environment (see<br />
Chap. 3 ”Installation”)<br />
Check cables or connections and<br />
replace, if necessary<br />
Select COM port to which the device<br />
environment is connected (see<br />
Chap. 3 ”Installation”)<br />
Repeat process with appropriately<br />
programmed chip card<br />
Terminate <strong>WinEMP</strong> (see Chap. 11<br />
"Exit program"), restart (see Chap. 3<br />
"Installation") and repeat process<br />
Exit the screen "Settings" first using<br />
BACK and then terminate <strong>WinEMP</strong><br />
(see Chap. 11 ”Exit program”)<br />
STATUS AND ERROR MESSAGES<br />
<strong>WinEMP</strong> – G-13.mft