WinEMP - NRI

WinEMP – G-13.mft
National Rejectors, Inc. GmbH, Buxtehude
DATA BLOCK DOWNLOAD
Accept all channel data of a coin from the current data block for the new
data block
If you want to accept the coin configuration of a certain channel (coin value/
acceptance band, coin signals, inhibit and sorting information, etc.) from the
current data block for the new data block and load this configuration into the
G-13.mft without any changes:
1 In column CURRENT – COIN and in the line of the relevant coin
channel, click the desired coin.
2 In column NEW – COIN and in the line of the desired coin channel,
click the coin/placeholder.
WinEMP accepts the coin with all its channel data for the new data
block and displays the command ACCEPT ALL CHANNEL DATA FROM X/XX*.
* changed download data
Clicking the new command in the "NEW – ACTION" column again,
restores the original command pre-set by WinEMP.
Accept coin name and acceptance band of a coin channel from the
current data block for the new data block
If you want to accept the acceptance band of a certain channel from the
current data block for the new data block and load this band into the G-13.mft
without any changes:
1 In column CURRENT – COIN and in the line of the relevant coin
channel, click the desired coin.
2 In column NEW – COIN and in the line of the desired coin channel,
click the coin/placeholder twice.
WinEMP accepts the coin with its acceptance band for the new data
block and displays the command ACCEPT AB FROM X/XX*.
* changed download data
Clicking the new command in the "NEW – ACTION" column again,
restores the original command pre-set by WinEMP.
131