WinEMP - NRI
WinEMP - NRI WinEMP - NRI
DATA BLOCK DOWNLOAD 128 WinEMP – G-13.mft ACCEPT AB = acceptance band will be accepted from coin configuration of current data block UPDATE AB = acceptance band will be accepted from coin configuration of current data block, but its limits will be updated according to current NRI values TOKEN AB CANNOT BE PROGRAMMED = acceptance band for token cannot be programmed In most cases the new data block is to be loaded into the G-13.mft as specified in the last two columns by WinEMP. But you can also accept the current channel data configured for the new data block or configure the coin channel data without acceptance bands (see section "Configure download data" in this chapter). If you have selected a data block with the write protection activated (ATTENTION!!! WRITE PROTECTION WILL BE ACTIVATED), no more setting can be changed, thus no more data block download can be carried out either. If a NEW DATA BLOCK is equal to a CURRENT DATA BLOCK, a request appears asking whether the COMPLETE DATA BLOCK or only new ACCEPTANCE BANDS are to be loaded. Select the second answer and confirm with OK if you only want to save new acceptance limits and all the other customized settings are to remain intact; Select the first answer if you not only want to save new acceptance limits but also want to overwrite all the other settings with the default values of that data block. 4 Confirm settings with OK. Following expiry of the status bar indication, the data block download has been completed. The G-13.mft now has the new data at its disposal for coin acceptance and possibly also for the purpose of further processing the coins. 5 Check all the settings (channel-specific and channel-superordinate ones) of the new data block (see next section). Please make a note of the new data block number on the coin validator, so that you are able to find the data block number at any time independently of WinEMP. National Rejectors, Inc. GmbH, Buxtehude
WinEMP – G-13.mft After the data block download ... After a data block download you should always check whether the G-13.mft accepts inserted coins according to your requirements. For this purpose, remain in the main menu and insert coins. WinEMP indicates in which coin channel the coin was accepted (LAST CHANNEL). National Rejectors, Inc. GmbH, Buxtehude Please check coin acceptance with both memory blocks and make sure, that the correct block is selected. DATA BLOCK DOWNLOAD 129
- Page 77 and 78: WinEMP - G-13.mft CONFIGURATION - F
- Page 79 and 80: WinEMP - G-13.mft CONFIGURATION - F
- Page 81 and 82: WinEMP - G-13.mft CONFIGURATION - F
- Page 83 and 84: WinEMP - G-13.mft CONFIGURATION - F
- Page 85 and 86: WinEMP - G-13.mft CONFIGURATION - F
- Page 87 and 88: WinEMP - G-13.mft CONFIGURATION - F
- Page 89 and 90: WinEMP - G-13.mft CONFIGURATION - F
- Page 91 and 92: WinEMP - G-13.mft CONFIGURATION - F
- Page 93 and 94: WinEMP - G-13.mft CONFIGURATION - F
- Page 95 and 96: WinEMP - G-13.mft CONFIGURATION - F
- Page 97 and 98: WinEMP - G-13.mft CONFIGURATION - F
- Page 99 and 100: WinEMP - G-13.mft CONFIGURATION - F
- Page 101 and 102: WinEMP - G-13.mft CONFIGURATION - F
- Page 103 and 104: WinEMP - G-13.mft CONFIGURATION - F
- Page 105 and 106: WinEMP - G-13.mft CONFIGURATION - F
- Page 107 and 108: WinEMP - G-13.mft CONFIGURATION - F
- Page 109 and 110: WinEMP - G-13.mft CONFIGURATION - F
- Page 111 and 112: WinEMP - G-13.mft CONFIGURATION - F
- Page 113 and 114: WinEMP - G-13.mft CONFIGURATION - F
- Page 115 and 116: WinEMP - G-13.mft Copy and paste or
- Page 117 and 118: WinEMP - G-13.mft Change token/coin
- Page 119 and 120: WinEMP - G-13.mft National Rejector
- Page 121 and 122: WinEMP - G-13.mft National Rejector
- Page 123 and 124: WinEMP - G-13.mft National Rejector
- Page 125 and 126: WinEMP - G-13.mft National Rejector
- Page 127: WinEMP - G-13.mft National Rejector
- Page 131 and 132: WinEMP - G-13.mft National Rejector
- Page 133 and 134: WinEMP - G-13.mft 10 Restore G-13.m
- Page 135 and 136: WinEMP - G-13.mft WINEMP UPDATE 12
- Page 137 and 138: National Rejectors, Inc. GmbH, Buxt
- Page 139 and 140: National Rejectors, Inc. GmbH, Buxt
- Page 141 and 142: National Rejectors, Inc. GmbH, Buxt
- Page 143 and 144: National Rejectors, Inc. GmbH, Buxt
- Page 145 and 146: National Rejectors, Inc. GmbH, Buxt
- Page 147 and 148: WinEMP - G-13.mft C Card reader 10
- Page 149 and 150: WinEMP - G-13.mft E ECV 155 totaliz
- Page 151 and 152: WinEMP - G-13.mft Return signal lin
- Page 153 and 154: WinEMP - G-13.mft Glossary National
- Page 155 and 156: WinEMP - G-13.mft National Rejector
- Page 157 and 158: WinEMP - G-13.mft National Rejector
<strong>WinEMP</strong> – G-13.mft<br />
After the data block download ...<br />
After a data block download you should always<br />
check whether the G-13.mft accepts inserted<br />
coins according to your requirements. For this<br />
purpose, remain in the main menu and insert<br />
coins. <strong>WinEMP</strong> indicates in which coin channel<br />
the coin was accepted (LAST CHANNEL).<br />
National Rejectors, Inc. GmbH, Buxtehude<br />
Please check coin acceptance with both<br />
memory blocks and make sure, that the<br />
correct block is selected.<br />
DATA BLOCK DOWNLOAD<br />
129
Change language