WinEMP - NRI
WinEMP - NRI
WinEMP - NRI
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
GENERAL INFORMATION<br />
Accessories<br />
12<br />
<strong>WinEMP</strong> – G-13.mft<br />
The following accessories can be ordered in addition to the <strong>WinEMP</strong> basic<br />
module. But what you need anyway, if you want to work with the card reader<br />
G-19.0647, is a PC interface with power supply for the coin validator.<br />
Additional authorization licences<br />
If the additional licences have been ordered together with the basic licence,<br />
they are already programmed on the chip card. If they are ordered afterwards,<br />
the chip card or the card reader G-19.0656 must be sent to <strong>NRI</strong> for<br />
programming purposes.<br />
Licence for data block download<br />
If you like to download data blocks using <strong>WinEMP</strong> in order to update the<br />
complete coin and device configuration, you will need an extra authorization<br />
licence in addition to the <strong>WinEMP</strong> basic module, that is programmed on your<br />
chip card (ordering code 20169).<br />
Licence for customer-own series configuration (DDL)<br />
In order to be able to copy an individual configuration of a master device<br />
quickly and simply and to transfer that copy into further G-13.mft in a series,<br />
the DDL licence must be programmed on the chip card (ordering code<br />
25851). Precondition for the DDL licence is the data block download licence,<br />
that must also be programmed.<br />
Power supply and PC interface for card reader G-19.0647 ...<br />
... G-13.mft (all models)<br />
If you want to work with the card reader G-19.0647, for the configuration<br />
procedure performed on the PC, the <strong>WinEMP</strong> PC interface G-55.0359<br />
(ordering code 26125) and a power pack (ordering code 26482) must be<br />
ordered in addition:<br />
For G-13.mft with parallel machine interface, other device environments are<br />
also possible:<br />
... for G-13.mft with parallel interface for testing the signal lines – validator operation<br />
If the signal lines of the machine interface are to be checked, you will require<br />
an additional tester. The following device environment is required:<br />
• Tester<br />
– G-19.0594/4 (ordering code 11809) for 220 V AC mains voltage +<br />
<strong>WinEMP</strong> PC interface G-55.0359 (ordering code 26125)<br />
– G-19.0651 (ordering code 22602) for 115 V AC mains voltage +<br />
<strong>WinEMP</strong> PC interface G-55.0359 (ordering code 26125)<br />
National Rejectors, Inc. GmbH, Buxtehude
Change language