WinEMP - NRI

WinEMP – G-13.mft
Change token/coin name
National Rejectors, Inc. GmbH, Buxtehude
CONFIGURATION
If you have taught a new token or a new coin at the vending machine on site,
you can give this new coin a name for convenience:
If you store an individual coin name, no coin ID is saved, i.e.
these coins cannot be updated through data block download
or duplication later on.
Therefore, please only change the coin name of the tokens
which have been taught on the vending machine.
All the other coin names are automatically given with coin ID,
if you want a teach a coin using WinEMP (see section "Teach
coin types/tokens in coin channels“ in this chapter).
1 Mark the corresponding coin channel by clicking the respective
CHANNEL NUMBER button.
The data of the coin channel will then be backlit darker.
2 Select menu item CHANNEL and then COIN NAME ...
A pop-up window opens for entering a specific coin designation.
3 – Under CURRENCY
enter either a token identification (e.g. TK1)
or the 3-digit currency acronym according
to ISO 4217,
– under COIN
enter the token number or the coin value and
– confirm with OK.
The pop-up window closes and the new coin designation is
displayed.
4 Adapt other settings, if necessary, to suit the new coin type/token
(see section "Configure G-13.mft for parallel standard/Casino/
totalizer, MDB/S1 or cctalk operation" in this chapter).
5 Save all settings in the G-13.mft with BACK.
117