WinEMP - NRI

WinEMP – G-13.mft
Copy and paste or delete coin channel data
National Rejectors, Inc. GmbH, Buxtehude
CONFIGURATION
If the acceptance band and all the other assigned properties of a coin
channel are to be copied and pasted in another coin channel:
1 Mark the coin channel with the desired settings by clicking the
respective CHANNEL NUMBER button.
The data of the coin channel will be backlit darker.
2 Copy the data of the marked channel by clicking the menu item
CHANNEL and then COPY.
The channel is provided with a rhombus symbol next to the channel
number (= all coin channel data stored in the clipboard).
3 Mark the coin channel for the same settings by clicking the
respective CHANNEL NUMBER button.
The data of the coin channel will then be backlit darker.
4 Insert the copied channel data into the marked coin channel by
clicking the menu item CHANNEL and then PASTE.
The new data is then stored in WinEMP, whereby any existing data is
overwritten, if necessary.
5 Leave the info box with the WinEMP standard setting and close the
box with OK (if you like to change the acceptance bandwidth, please
use the coin insertion function and follow the steps listed in section
"Optimize acceptance of genuine coins and rejection of false coins"
in this chapter).
The acceptance band of the coin channel just configured can now be
adjusted, e.g., for a narrow or very narrow coin channel (see section
"Optimize acceptance of genuine coins and rejection of false coins" in this
chapter). Please refer to section "Configure G-13.mft for parallel standard/
Casino/totalizer or MDB/S1/cctalk operation" in this chapter to find how to
change other coin channel data.
6 Click BACK to store the setting in the G-13.mft or proceed to the next
setting on this screen and store all your settings later.
115