WinEMP - NRI
WinEMP - NRI WinEMP - NRI
CONFIGURATION – FOR CCTALK INTERFACE 112 WinEMP – G-13.mft If you want to assign specific control lines to the sorter pathes: 1 Select menu item EXTRA and then OPTIONS. The dialog box BASIC SETTINGS AND OPTIONS opens. 2 In the "table of contents" on the left-hand side, select the index word SORTING. 3 On the righthand side under SORTING CONTROL in the line of the respective SORTER PATH, click on (tick) the box of the OUTPUT LINE(S) that is (are) to transmit a sorting signal (here: NRI 3-fold sorting device). If you click on the box again the tick would be deleted, and no signal would be transmitted on this line. 4 Confirm your entry with OK and close the window again or proceed to the next setting in this dialog box first and confirm all your settings later. 5 Click BACK to store the setting in the G-13.mft or proceed to the next setting on this screen and store all your settings later. National Rejectors, Inc. GmbH, Buxtehude
WinEMP – G-13.mft CONFIGURATION – FOR CCTALK INTERFACE Assign sorter path to a coin type After you have defined the output lines for the cctalk sorter path, you must now assign a specific sorter path to the coin types to be sorted, i.e. to the cctalk output 1–16: 1 Select menu item EXTRA and then OPTIONS. The dialog box BASIC SETTINGS AND OPTIONS opens. 2 In the "table of contents" on the left-hand side, select the index word SORTING. 3 On the righthand side under SORTER PATH in the line of the respective CCTALK OUTPUT, select SORTER PATH 1-8 from the pull-down menu (here: NRI 3-fold sorting device). National Rejectors, Inc. GmbH, Buxtehude Next to DEFAULT/OVERRIDE, select the sorter path for the cash-box chute or for the alternative sorter path which is to be used to sort coins when a payout unit is full. 4 Confirm your entry with OK and close the window again or proceed to the next setting in this dialog box first and confirm all your settings later. 5 Click BACK to store the setting in the G-13.mft or proceed to the next setting on this screen and store all your settings later. 113
- Page 61 and 62: WinEMP - G-13.mft CONFIGURATION - F
- Page 63 and 64: WinEMP - G-13.mft CONFIGURATION - F
- Page 65 and 66: WinEMP - G-13.mft CONFIGURATION - F
- Page 67 and 68: WinEMP - G-13.mft CONFIGURATION - F
- Page 69 and 70: WinEMP - G-13.mft CONFIGURATION - F
- Page 71 and 72: WinEMP - G-13.mft CONFIGURATION - F
- Page 73 and 74: WinEMP - G-13.mft CONFIGURATION - F
- Page 75 and 76: WinEMP - G-13.mft CONFIGURATION - F
- Page 77 and 78: WinEMP - G-13.mft CONFIGURATION - F
- Page 79 and 80: WinEMP - G-13.mft CONFIGURATION - F
- Page 81 and 82: WinEMP - G-13.mft CONFIGURATION - F
- Page 83 and 84: WinEMP - G-13.mft CONFIGURATION - F
- Page 85 and 86: WinEMP - G-13.mft CONFIGURATION - F
- Page 87 and 88: WinEMP - G-13.mft CONFIGURATION - F
- Page 89 and 90: WinEMP - G-13.mft CONFIGURATION - F
- Page 91 and 92: WinEMP - G-13.mft CONFIGURATION - F
- Page 93 and 94: WinEMP - G-13.mft CONFIGURATION - F
- Page 95 and 96: WinEMP - G-13.mft CONFIGURATION - F
- Page 97 and 98: WinEMP - G-13.mft CONFIGURATION - F
- Page 99 and 100: WinEMP - G-13.mft CONFIGURATION - F
- Page 101 and 102: WinEMP - G-13.mft CONFIGURATION - F
- Page 103 and 104: WinEMP - G-13.mft CONFIGURATION - F
- Page 105 and 106: WinEMP - G-13.mft CONFIGURATION - F
- Page 107 and 108: WinEMP - G-13.mft CONFIGURATION - F
- Page 109 and 110: WinEMP - G-13.mft CONFIGURATION - F
- Page 111: WinEMP - G-13.mft CONFIGURATION - F
- Page 115 and 116: WinEMP - G-13.mft Copy and paste or
- Page 117 and 118: WinEMP - G-13.mft Change token/coin
- Page 119 and 120: WinEMP - G-13.mft National Rejector
- Page 121 and 122: WinEMP - G-13.mft National Rejector
- Page 123 and 124: WinEMP - G-13.mft National Rejector
- Page 125 and 126: WinEMP - G-13.mft National Rejector
- Page 127 and 128: WinEMP - G-13.mft National Rejector
- Page 129 and 130: WinEMP - G-13.mft After the data bl
- Page 131 and 132: WinEMP - G-13.mft National Rejector
- Page 133 and 134: WinEMP - G-13.mft 10 Restore G-13.m
- Page 135 and 136: WinEMP - G-13.mft WINEMP UPDATE 12
- Page 137 and 138: National Rejectors, Inc. GmbH, Buxt
- Page 139 and 140: National Rejectors, Inc. GmbH, Buxt
- Page 141 and 142: National Rejectors, Inc. GmbH, Buxt
- Page 143 and 144: National Rejectors, Inc. GmbH, Buxt
- Page 145 and 146: National Rejectors, Inc. GmbH, Buxt
- Page 147 and 148: WinEMP - G-13.mft C Card reader 10
- Page 149 and 150: WinEMP - G-13.mft E ECV 155 totaliz
- Page 151 and 152: WinEMP - G-13.mft Return signal lin
- Page 153 and 154: WinEMP - G-13.mft Glossary National
- Page 155 and 156: WinEMP - G-13.mft National Rejector
- Page 157 and 158: WinEMP - G-13.mft National Rejector
<strong>WinEMP</strong> – G-13.mft CONFIGURATION – FOR CCTALK INTERFACE<br />
Assign sorter path to a coin type<br />
After you have defined the output lines for the cctalk sorter path, you must<br />
now assign a specific sorter path to the coin types to be sorted, i.e. to the<br />
cctalk output 1–16:<br />
1 Select menu item EXTRA and then OPTIONS.<br />
The dialog box BASIC SETTINGS AND OPTIONS opens.<br />
2 In the "table of<br />
contents" on<br />
the left-hand<br />
side, select<br />
the index word<br />
SORTING.<br />
3 On the righthand<br />
side<br />
under SORTER<br />
PATH in the line<br />
of the<br />
respective<br />
CCTALK OUTPUT,<br />
select SORTER<br />
PATH 1-8 from the pull-down menu (here: <strong>NRI</strong> 3-fold sorting device).<br />
National Rejectors, Inc. GmbH, Buxtehude<br />
Next to DEFAULT/OVERRIDE, select the sorter path for the cash-box<br />
chute or for the alternative sorter path which is to be used to sort<br />
coins when a payout unit is full.<br />
4 Confirm your entry with OK and close the window again or proceed<br />
to the next setting in this dialog box first and confirm all your settings<br />
later.<br />
5 Click BACK to store the setting in the G-13.mft or proceed to the next<br />
setting on this screen and store all your settings later.<br />
113