WinEMP - NRI

WinEMP – G-13.mft CONFIGURATION – FOR CCTALK INTERFACE
Assign cctalk output to a coin type
If you have taught a new coin in a coin channel, it will now be assigned a
specific cctalk output information in the form of a number 1–16, which is to
be sent to the vending machine if a coin was accepted.
1 In the line of the respective coin channel under the heading CCT
OUTPUT, select the desired number from the pull-down menu.
2 Click BACK to store the setting in the G-13.mft or proceed to the next
setting on this screen and store all your settings later.
National Rejectors, Inc. GmbH, Buxtehude
105