Ultrapro™ Autobody Sealant - Auto Paint Plus
Ultrapro™ Autobody Sealant - Auto Paint Plus
Ultrapro™ Autobody Sealant - Auto Paint Plus
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Product Product Uses<br />
Uses<br />
General purpose automotive seams, including door skins, rocker panels, rear body panels, trunk seams,<br />
floor pans, etc.<br />
Performance Performance Properties<br />
Properties<br />
1. Sag Resistance, @ 30 minutes<br />
1/4 inch bead 0 inch<br />
3/8 inch bead 0 inch<br />
2. Tack Free Time @ 75°F, 50% RH 45 minutes<br />
Polyethylene test<br />
3. Adhesion To:<br />
Glass Good<br />
<strong>Paint</strong>ed Metal Very Good<br />
Aluminum Good<br />
4. QUV 150°F/500 hours No effect on clarity or elas tomeric properties<br />
5. Flexibility (60 mil spread) Flexible over a 2 inch mandrel @-20°F<br />
6. Hardness, Rex 45<br />
Handling Handling and and and Application Application Information<br />
Information<br />
Information<br />
Directions Directions for for for Use<br />
Use<br />
1. Always apply over automotive primer. Applying over bare metal will not provide enough corrosion<br />
protection. Acid etching primer is not recommended; if used, be sure to allow to fully cure before<br />
applying seam sealer, or residual acid can weaken the bond.<br />
2. If necessary, clean and dry surface with 3M General Purpose Adhesive Cleaner, PN 08984. Do not<br />
use an adhesive cleaner until the primer has fully cured.<br />
3. Cut nozzle tip to provide 1/4" diameter bead. Puncture foil seal in base of spout. Knock out end seal<br />
at the bottom of the tube.<br />
4. Place in 3M Professional Caulking Gun, PN 08993 and engage ratcheting mechanism.<br />
5. Apply desired bead width and tool to final appearance, if necessary. When sealing is complete,<br />
disengage rachet to stop flow.<br />
6. Wait to dry before applying paint over the sealer. Thicker beads of seam sealer will take longer to<br />
cure before painting. The stated dry time before painting is based on a 1/4" bead at 70 deg F.<br />
Applications<br />
Applications<br />
3M Ultrapro <strong><strong>Auto</strong>body</strong> <strong>Sealant</strong> is an excellent medium bodied seam sealer for most interior and<br />
exterior automotive body joints such as: door skins, rocker panels, rear body panel areas, trunk seams,<br />
floor pans, etc.<br />
Storage Storage and and Handling<br />
Handling<br />
Store at room temperature. Rotate stock on a "first-in-first-out" basis.<br />
When stored at the recommended conditions in original, unopened<br />
containers, this product has a shelf life of 12 months. Use in a<br />
well-ventilated area.<br />
Precautionary Precautionary Information<br />
Information<br />
Refer to Product Label and Material Safety Data Sheet for Health and Safety Information before using this product .<br />
Country<br />
Country<br />
US<br />
This This document document is is public public . It may be distributed .<br />
2