Manual
Manual
Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Maintenance Instructions<br />
6.3 Environmental protection<br />
Danger to the environment due to mishandling!<br />
Significant environmental damage can occur, particularly for incorrect disposal,<br />
if environmentally hazardous operating materials are mishandled.<br />
Therefore:<br />
• Always observe the instructions mentioned below.<br />
• Take immediate action if environmentally hazardous materials<br />
reach the environment. Inform the responsible local authorities<br />
about the damage in the case of doubt.<br />
The disposal must be performed by a specialist disposal<br />
company.<br />
6.4 Maintenance interval<br />
Environmental protection.<br />
For the maintenance interval, please see the „General information for PMS generators“ which are attached to this<br />
manual.<br />
At generator with dynamic operation hours (f.e. Generators with iControl2 system) the maintenance interval can may<br />
be extended.<br />
With the dynamic operation hours the service interval can be raised up to<br />
30% (200h max.). Make sure that the dynamic operation hours are not reset<br />
accidently between the service interval.<br />
6.5 General maintenance instructions<br />
6.5.1 Checks before starting<br />
• Oil level<br />
• Cooling system leaks<br />
• Visual check for any changes, leaks oil drain system, v-belt,<br />
cable connections, hose clips, air filter, fuel lines<br />
Note:<br />
6.5.2 Hose elements and rubber formed component in the sound cover<br />
Check all hoses and hose connections for good condition. The rubber hoses are very sensitive to enviromental influences.<br />
They can season fast with dry air, in which environment of muted oil and fuel steams and increased temperature.<br />
The hoses must be checked regularly for elasticity. There are operating situations, at which the hoses must be<br />
renewed once in the year.<br />
Additionally to usual tasks of maintenance (oil level check, oil filter control etc.) further maintenance activities are to<br />
be accomplished for marine gensets. It belongs control of the sacrificial anode (cooling water connection block) and<br />
the front seal cover at the generator.<br />
7.5.12 Panda_4000s_PMS_SCB_FCB_eng.R04 - Kapitel/Chapter 6: Maintenance Instructions Seite/Page 97
Change language