Manual
Manual
Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Installation Instructions<br />
Mini VCS at the generator<br />
Sample picture<br />
Capacitors for the excitation<br />
Sample picture<br />
Boost relais<br />
Additionally, the automatic start booster is located on the circuit<br />
control board. The starting current is increased by connecting<br />
a second group of capacitors, if the voltage drops<br />
below a pre-set voltage.<br />
The starting current can be increased by 300% for a short<br />
period by combining both components voltage/speed control<br />
and ASB start booster.<br />
Sample picture<br />
Fig. 5.12.4-1: Mni-VCS and capacitors<br />
Fig. 5.12.4-2: Capacitors for the excitation<br />
Fig. 5.12.4-3: Boost relais<br />
7.5.12 Panda_4000s_PMS_SCB_FCB_eng.R04 - Kapitel/Chapter 5: Installation Instructions Seite/Page 87