Manual
Manual
Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Installation Instructions<br />
4. (-) cable of first battery<br />
Disconnect the batteries in in reverse procedure.<br />
Fig. 5.10.2-4: Installation starter batterie<br />
5.10.3 Connection of the remote control panel - see separate control panel manual<br />
5.11 Generator AC System Installation<br />
Before the electrical system is installed, READ the SAFETY<br />
INSTRUCTIONS of this manual FIRST!<br />
Be sure that all electrical installations (including all safety systems)<br />
comply with all required regulations of the regional authorities. This<br />
includes lightening conductor, personal protection switch etc.<br />
Warning!: Electrical Voltage<br />
5.12 AC-Control box with VCS and starting current limitation<br />
An AC-Control box is necessary for the operation of Panda generators. According to the generator capacity the AC<br />
Control box is variable dimensioned and equipped. It is supplied with a lockable cap.<br />
This cap must necessarily be locked when the generator is running, as at all models during operation, 400 V is present<br />
in the AC control box.<br />
For the excitation of the generator all necessary capacitors, as well as the electrical control for the voltage/speed<br />
control VCS and the starting current limitation (not available at all models) are stored in the AC Control box. The AC<br />
Control box must be connected to the generator with the electrical lines (230V and 400V).<br />
Only qualified personnel may carry out working at the<br />
AC Control box.<br />
Danger to life - 400V AC<br />
7.5.12 Panda_4000s_PMS_SCB_FCB_eng.R04 - Kapitel/Chapter 5: Installation Instructions Seite/Page 83