Manual
Manual
Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5.7.3.1 Ideal position of the waterlock<br />
Installation Instructions<br />
Important Note!<br />
The ideal position of the waterlock would be in center underneath the generator. Only in this position it is<br />
assured that the water level cannot change drastically in tilted position by the waterlock moving out of the<br />
center line. See the following pictures:<br />
In this picture, the waterlock is mounted in center underneath the generator.<br />
When the ship tilts, the position of the waterlock related to the critical point at<br />
the exhaust hose, changes only slightly.<br />
Tilted position 15 degrees<br />
The distance from the exhaust elbow to the hydrostatic head has derated to<br />
540 mm.<br />
Fig. 5.7.3.1-1: Ideal position of the waterlock<br />
Fig. 5.7.3.1-2: Tilted position 15 degrees<br />
Seite/Page 66 Panda_4000s_PMS_SCB_FCB_eng.R04 - Kapitel/Chapter 5: Installation Instructions 7.5.12
Change language