Manual

Installation Instructions
5. Installation Instructions
All connections (hoses, wires etc.) and installation
instructions are designed and suited for “standard”
installation situations.
In situations where Fischer Panda has no detailed information
concerning certain installation requirements (such as
vehicle specifications, maximum vehicle speed - and all other
conditions concerning special operating situations) the installation
instructions should be used as an example guide only.
The installation must be undertaken and proved by a suitable
qualified/trained person and should be in accordance with
the law as required by the country and special situation.
Damages caused by faulty or incorrect installation are not
covered by the warranty.
5.1 Personal requirements
Attention!: Adapt system correctly.
The described installation must be done by a technical trained person or a Fischer Panda service point.
5.1.1 Hazard notes for the installation
see “Safety first!” on Page 8.
Follow the general safety instruction at the front of this manual.
DANGER TO LIFE! - Incorrect handling may lead to
health damage and to death.
Always disconnect the battery bank (first negative terminal
than positive terminal) before you work at the generator or
the electric system of the generator so that the generator
may not be started unintentionally.
Improper installation can result in severe personal injuries or
material damage. Therefore:
- Always undertake installation work when the generator is
switched off.
- Ensure there is sufficient installation clearance before start
working.
- Ensure tidiness and cleanliness at the workplace. Loose
components and tools lying around or on top of each other
are sources of accidents.
- Only perform installation work using commercially available
tools and special tools. Incorrect or damaged tools can result
Notice:
.Warning!: Automatic start
Warning!: Risk of injury
7.5.12 Panda_4000s_PMS_SCB_FCB_eng.R04 - Kapitel/Chapter 5: Installation Instructions Seite/Page 51