Manual
Manual
Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Oil pressure switch<br />
In order to be able to monitor the lubricating oil system, an oil pressure<br />
switch is built into the system.<br />
Sample picture 4000s FC<br />
4.3.6 Components of Oil Circuit 4000s SC + 4000s FC<br />
Oil filler neck with cap<br />
Normally the filler neck for the engine oil is on the top side of the valve cover.<br />
A second filler neck is additionally attached at the operating side for numerous<br />
generator types. Please ensure that the filler necks are always well<br />
secured after filling with engine oil.<br />
Consider also the references to the engine oil specification.<br />
Sample picture 4000s FC<br />
Oil dipstick<br />
At the dipstick the permissible level is indicated by the markings "maximum"<br />
and "minimum". The engine oil should be never filled beyond the maximum.<br />
Sample picture 4000s FC<br />
Fig. 4.3.5-4: Oil pressure switch<br />
Fig. 4.3.6-1: Engine oil filler neck<br />
Fig. 4.3.6-2: Engine oil dipstick<br />
The Panda Generator<br />
Seite/Page 46 Panda_4000s_PMS_SCB_FCB_eng.R04 - Kapitel/Chapter 4: The Panda Generator 7.5.12