Manual
Manual
Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4.3.2 Components of Cooling System (Raw water + Fresh water)<br />
Z:\Inventor\P 4\P 04 synchron FCB\Obieg wody.idw<br />
08<br />
01 02<br />
03<br />
Fig. 4.3.2-1: Two circle system<br />
Sea water inlet<br />
Exhaust with sea water outlet<br />
07<br />
Air offtake to stilling basin's up intake<br />
04<br />
01) Cooling water in (raw water in)<br />
02) Raw water pump<br />
03) Connection hose for cooling circle ventilation valve<br />
04) Oil cooler (heat exchanger)<br />
05) Generator housing with coil<br />
06) Cooling water in at engine<br />
The Panda Generator<br />
Seite/Page 42 Panda_4000s_PMS_SCB_FCB_eng.R04 - Kapitel/Chapter 4: The Panda Generator 7.5.12<br />
06<br />
Fresh water offtake to stilling basin's down intake<br />
Stilling<br />
basin<br />
Down intake<br />
09<br />
Up intake<br />
05<br />
07) Water connection block (cooling water out at<br />
engine)<br />
08) Water cooled exhaust elbow<br />
09) Bypass between generator housing and cooling<br />
water connection block