Manual
Manual
Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Maintenance Instructions<br />
2. Loosen oil filling cap<br />
Unscrew the oil filling cap. This is necessary, because<br />
otherwise a vacuum will form and the oil can not completely<br />
drain off.<br />
Sample picture<br />
3. Open oil drain screw.<br />
Unscrew the oil drain screw by means of the open-ended<br />
wrench from the oil drain hose (rotating direction left).<br />
Use a second open-ended wrench to lock. Make sure to<br />
do this over the container.<br />
Use spanner size 17mm.<br />
4. Discharge used oil.<br />
Let the entire amount of oil drain out of the engine. This can take several minutes.<br />
5. Remove used oil filter / clean oil screen<br />
Release the oil filter by turning the filter wrench counterclockwise.<br />
The filter might be full of oil. Make sure to not<br />
spill anything and avoid skin contact.<br />
Sample picture<br />
Fig. 6.9-1: Oil filling cap<br />
Fig. 6.9-2: Oil drain hose<br />
Fig. 6.9-3: Oil filter<br />
7.5.12 Panda_4000s_PMS_SCB_FCB_eng.R04 - Kapitel/Chapter 6: Maintenance Instructions Seite/Page 107
Change language