Premier 48, 88, 168 & 640 Installation Manual - PVK

Premier 48, 88, 168 & 640 Installation Manual Programming the Control Panel
Set System Time
Yes
8 tuv
Yes
????
Yes
Use keys 0 - 9 to enter the
new time (24-Hour format)
e.g. 1645 = 4:45 pm
The control panel has a real time clock that is used to date
and time stamp events that are recorded within the system
log. The option allows you to set the control panel time.
Set System Date
Yes
9 wxyz
Yes
??????
Yes
Use keys 0 - 9 to enter the
new date DD/MM/YY
e.g. 030501 = 3rd May 2001
The control panel has a real time clock that is used to date
and time stamp events that are recorded within the system
log. The option allows you to set the control panel date.
Change Eng. Code
INS176 89
Yes
Yes
????
Yes
Enter User code number
4, 5 or 6 digits long
e.g. 1234 = 1234
This option allows the Engineer code (User 00) to be changed.
This code can be 4, 5 or 6 digits in length. The system will
allow a mixture of different length User codes.
Adjust Volumes
Yes
Yes
No
8 tuv
Menu
Use the SCROLL key
to select a Panel, Keypad
or Expander Speaker
Enter a value or use the
SCROLL key to increase
or decrease the value
e.g. 8 = Full Volume
This option is used to adjust the volume level of speakers that
are connected to the control panel, keypads and expanders.
Pressing the CHIME key will cause the speaker that is
being programmed to generate the exit tone at the
selected volume level.