Premier 48, 88, 168 & 640 Installation Manual - PVK
Premier 48, 88, 168 & 640 Installation Manual - PVK
Premier 48, 88, 168 & 640 Installation Manual - PVK
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Programming the Control Panel <strong>Premier</strong> <strong>48</strong>, <strong>88</strong>, <strong>168</strong> & <strong>640</strong> <strong>Installation</strong> <strong>Manual</strong><br />
Confirm Devices<br />
<br />
<br />
Yes<br />
<br />
<br />
5 jkl<br />
<br />
<br />
Yes<br />
<br />
<br />
<br />
<br />
Yes<br />
<br />
<br />
Yes<br />
<br />
<br />
Area<br />
<br />
<br />
Reset<br />
<br />
<br />
Menu<br />
Use the SCROLL key to<br />
select the required network<br />
Press YES if the number<br />
of devices fitted is correct.<br />
An ‘X’ on the display indicates<br />
that a device was previous fitted<br />
Press YES to confirm<br />
the devices fitted<br />
(a confirmation tone<br />
will be heard)<br />
Press AREA to view the network<br />
errors (the total number of errors<br />
on the network and the last device<br />
to cause an error is being displayed)<br />
Press RESET to<br />
clear the network errors<br />
This option allows the networks to be viewed to see what<br />
devices are connected and whether there are any problems.<br />
Whenever new devices are added to the system, the<br />
networks must be checked and confirmed.<br />
<br />
If any devices are removed from the system, the networks<br />
must be rechecked and reconfirmed.<br />
An ‘X’ on the display indicates that device that was<br />
previous fitted is no longer being seen by the control<br />
panel.<br />
View RKP Status<br />
<br />
<br />
<strong>88</strong> INS176<br />
Yes<br />
<br />
<br />
6 mno<br />
<br />
<br />
Yes<br />
<br />
<br />
??<br />
<br />
<br />
Menu<br />
Use keys 1 - 8 to select a<br />
keypad and press 0 to<br />
toggle between networks e.g.<br />
0, 3 = Network 2, Keypad 3<br />
Press AREA to display errors<br />
Press NO to test output<br />
Press OMIT to test sounder<br />
This option allows the status of the keypad, the zones and the<br />
output to be viewed.<br />
Check Exp. Status<br />
<br />
<br />
Yes<br />
<br />
<br />
7 pqrs<br />
<br />
<br />
Yes<br />
<br />
<br />
??<br />
<br />
<br />
Area<br />
<br />
<br />
Menu<br />
Use keys 1 - 8 to select an<br />
expander and press 0 to<br />
toggle between networks e.g.<br />
0 , 2 = Network 2, Expander 2<br />
Press AREA to change between<br />
zones/voltage/outputs/errors<br />
Press CHIME to test zones<br />
Press OMIT to test sounder<br />
Press 1 - 8 to test outputs<br />
This option allows the status of the expander, the zones,<br />
voltage/inputs and outputs to be viewed.