Premier 48, 88, 168 & 640 Installation Manual - PVK

More documents

Recommendations

Info

Programming the Control Panel Premier 48, 88, 168 & 640 Installation Manual Do Bell Test Yes 2 abc Yes Omit 3 def 3 def Menu Press OMIT to invoke the Engineers Hold Off mode of a Texecom Bellbox Use the SCROLL key to select the required test Press YES to test ALL channels or use keys 0 - 8 to select individual channels e.g. 3 = Channel 3 Press YES again to clear ALL channels or use keys 0 - 8 to clear individual channels e.g. 3 = Channel 3 This option allows Allows the Bell, Speaker and various control panel outputs to be tested. The following outputs can be individually tested: Test Bell The Bell output Test Strobe The Strobe output Test Speaker The Speaker output Test Digi The Hardwired digicom outputs Test Panel The panel outputs Test RedCARE The plug on RedCARE outputs Test Com???? The plug on digi outputs LCD Display The LCD keypad display User Outputs Any outputs that have the ‘User Test’ attribute (see page 62 for details). Pressing OMIT at the Bell or Strobe Test will cause the Strobe output to pulse 3 times, invoking Engineers Hold Off mode if a Texecom bell box is connected. Do Walk Test 86 INS176 Yes 2 abc Yes Yes Chime Area ??? Menu Press YES to walk test all areas or use keys 1 - 8 to select/deselect areas Press CHIME to select: Chime Once then lockout zone Chime on every activation or No Chime at all Press AREA. to toggle the display between the zones that have been tested and the zones that still need testing To view zones that have not activated recently, enter the number of days required i.e. 007 will show zones that have not activated in the last 7 days Any of the zones on the system can be walk tested to ensure that they operate correctly. A walk test can only be performed when the system or area is disarmed. Once a zone has been activated it will not generate a chime tone again. If however the key is pressed, a zone will chime every time it is activated. The Walk test menu also includes a last activation log that can be recalled when doing a walk test. This log shows zones that have NOT been activated over a period of days. Pressing the key will firstly show the zones that still need testing, pressing the key a second time will display the zones that have not been activated that day, to view zones that have not been activated for 3 days, type in 003 the maximum number of days that can be recalled is 255, pressing the key a third time will revert back to the standard walk test display.
Premier 48, 88, 168 & 640 Installation Manual Programming the Control Panel View Zone Status Yes 3 def Yes ??? Omit Menu Use keys 0 - 9 to enter the required zone number or use the SCROLL key to search e.g. 064 = Zone 64 To disable the zone, Press OMIT. To make the zone Chime, Press CHIME To view the zone text, Press AREA This option can be used to view the status of any zone on the system to see whether it is ‘Active’, ‘Secure’, ‘Tampered’ or ‘Shorted’. The selected zone can also be temporarily disabled (zone and tamper) to allow the zone to be worked on or made to chime every time it is activated. When leaving the View Zone Status menu, all zones will be automatically reinstated and cleared of Chime. Do System Tests INS176 87 Yes 4 ghi Yes Yes Menu Use keys 1 - 4 to select an option or use the SCROLL key to search e.g. YES = View Sys. Status This option allows various control panel features to be tested or reviewed. 1 - View Sys. Status Allows the system voltage and current to be viewed. 2 - View Batt Status Allows the battery voltage and charging status to be viewed. 3 - Test Outputs Allows the Bell, Speaker and system outputs to be tested. 4 - View Version No. This option allows the control panel software version and serial number to be viewed.
Page 1 and 2:
THANK YOU FOR VOTING TEXECOM INSTAL
Page 3 and 4:
Contents Premier 48, 88, 168 & 640
Page 5 and 6:
Premier 48, 88, 168 & 640 Installat
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Premier 48, 88 & 168 Installation M
Page 31 and 32:
Page 33 and 34:
Page 35 and 36: Premier 48, 88, 168 & 640 Installat
Page 85: Premier 48, 88, 168 & 640 Installat
show all

Premier 48, 88, 168 & 640 Installation Manual - PVK

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?