Premier 48, 88, 168 & 640 Installation Manual - PVK

More documents

Recommendations

Info

Programming the Control Panel Premier 48, 88, 168 & 640 Installation Manual The following options are used when a Paknet Radio-Pad is connected to the control panel in order to achieve DUAL SIGNALLING to an Alarm Receiving Centre, when a MODEM (External PC or Com2400) is used to connect to the control panel or send SMS messages to mobile phones, when an AV Module is connected to the control panel in order to achieve AUDIO VERIFICATION to an Alarm Receiving Centre or when a TCP/IP Module is connected for communications over a Broadband/ADSL/DSL Line. Setup Radio-Pad Pad ARC 1 Pri No This is the first number that is used by the Radio-Pad for reporting events to ARC 1. Pad ARC 1 Sec No This is the second number that is used by the Radio-Pad for reporting events to ARC 1. Pad ARC 1 Prefix This number will prefix the account number for ARC 1. Pad ARC 2 Pri No This is the first number that is used by the Radio-Pad for reporting events to ARC 2. Pad ARC 2 Sec No This is the second number that is used by the Radio-Pad for reporting events to ARC 2. Pad ARC 2 Prefix This number will prefix the account number for ARC 2. Pad ARC 3 Pri No This is the first number that is used by the Radio-Pad for reporting events to ARC 3. Pad ARC 3 Sec No This is the second number that is used by the Radio-Pad for reporting events to ARC 3. Pad ARC 3 Prefix This number will prefix the account number for ARC 3. Radio-Pad Attempts This is the number of times the Radio-Pad will try to dial the Alarm Receiving Centre telephone number before giving up. The number of dialling attempts is limited to 9. If this value is set to 0, the Radio-Pad will never dial out. Setup AV Module AV No. 1> This is the first number that is dialled by the AV Module. AV No. 3> This is the second number that is dialled by the AV Module. AV No. 3> This is the third number that is dialled by the AV Module. AV Dial Attempts This is how many times the AV Module will attempt to dial before giving up. The number of dialling attempts is limited to 9. If this value is set to 0, the AV Module will never dial out. AV Re-Dial Delay This is the amount of delay that the AV Module uses between re-dialling telephone numbers. Setup IP Module ComIP Address This is the IP Address of the IP Module. ComIP Port This is the Port number of the IP Module. ComIP Gateway This is the Gateway IP Address that the IP Module communicates through. ComIP Mask This is the Subnet Mask number for the IP Module. Polling/SMG Address This is the IP address of a dedicated Polling or SMG Server that the IP Module might need to connect to. Name/SMG Port This is a descriptive name for the IP Module or SMG Port and might be used for authentication purposes. SMS Centre Pri. This is the first SMS centre telephone number that is used by for sending SMS to mobile phones. (Default = 07860 980480). SMS Centre Sec. This is the second SMS centre telephone number that is used by for sending SMS to mobile phones. Modem Setup Stg. If a standard PC modem is connected to Com1 or Com2, it may require a configuration string to make it work properly (please refer to instruction manual of modem being used for details of required AT commands). 72 INS176 The Setup string is programmed the same way that TEXT would be programmed and has a maximum length of 16 characters. The setup string does NOT require AT to be entered at the beginning as this is done automatically. Modem Speed This option allows the speed of a standard PC modem connected to Com1 or Com2 to be adjusted. Pad Serial No. This screen displays the Serial number of the Radio-Pad that is connected. Pad NUA This screen displays the NUA number of the Radio-Pad that is connected. Last Call From This screen displays the NUA number of the last Radio-Pad that communicated with the Radio-Pad that is connected to the control panel. FSS:??? (>=004), Forward Signal Strength RSS:??? (>=050), Reverse Signal Strength This screen displays the Radio-Pad Forward (FSS) and Reverse (RSS) Signal Strength of the Radio-Pad that is connected to the control panel. The FSS value should be greater than or equal to 4 and the RSS value should be greater than or equal to 50.
Premier 48, 88, 168 & 640 Installation Manual Programming the Control Panel CRC:??? (
Page 1 and 2:
THANK YOU FOR VOTING TEXECOM INSTAL
Page 3 and 4:
Contents Premier 48, 88, 168 & 640
Page 5 and 6:
Premier 48, 88, 168 & 640 Installat
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22: Premier 48, 88, 168 & 640 Installat
Page 29 and 30: Premier 48, 88 & 168 Installation M
Page 71: Premier 48, 88, 168 & 640 Installat
show all

Premier 48, 88, 168 & 640 Installation Manual - PVK

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?