Premier 48, 88, 168 & 640 Installation Manual - PVK

More documents

Recommendations

Info

Programming the Control Panel Premier 48, 88, 168 & 640 Installation Manual Expander Areas Expanders can be assigned to any number of areas, assigning an expander to an area determines: • Which areas the speaker output on the expander will generate tones for i.e. if the expander is assigned to areas A and C, the speaker will only operate when areas A or C are in alarm, entry, exit etc. • Which areas will cause a Tamper alarm when the expander cover is removed Expander Location Text Each expander can be assigned up to 16 characters of text. This text can be used to describe where the expander is located within the building. Text is programmed in a similar way to mobile phones. Select characters by pressing the corresponding key the appropriate number of times (to select a character on the same key, press the key to move the cursor along). Expander Auxiliary Input Each expander has an input that can be programmed for one of the following options. If not being used, the input must be programmed as ‘Not Used’ (Default = Not Used). Not Used Never monitored by the system. Auxiliary Tamper Normally used for monitoring the box tamper of auxiliary devices such as power supplies etc (remove 0V for Tamper alarm). Bell Tamper Normally used for monitoring Bell Tamper returns (remove 0V for Tamper alarm). Remote Reset Normally used to reset the system/area following an Intruder alarm (the area must also be programmed for Anti-code reset) see page 41 for details (apply 0V to reset). Line Fault +ve Normally used to indicate a telephone line fault (remove 0V for Line Fault). Line Fault -ve Normally used to indicate a telephone line fault (apply 0V for Line Fault). Silence Sounders Normally used to silence the Internal sounders following an Intruder alarm and would be used in conjunction with Audio Verification units (apply 0V to silence). Global Omit Key Normally wired to a key switch. When the key switch is activated, all zones (with the ‘Omit’ attribute) assigned to the same area as the expander, will be omitted (apply 0V for omit). Local Omit Key Normally wired to a key switch. When the key switch is activated, all zones (with the ‘Omit’ attribute) wired to the expander, will be omitted (apply 0V for omit). PSU Fault Normally used to monitor a Power Supply for faults (remove 0V for Fault). Defer Auto Arming Normally used to defer the automatic arming of an area (apply 0V to defer). Expander Speaker Volume This option controls the volume level of advisory tones from loudspeakers connected to the expanders. Advisory tones consist of ‘Entry/Exit’ and ‘Warning’ type tones. 1 = minimum; 8 = maximum. Alarm tones are always full volume. Expander Sounder Options The speaker output on the expander can be programmed so that certain types of tones are not generated. When deselected, Fire, Alarms, Fault, Service, Entry, Exit and Chime tones will not be heard. Select tones by pressing keys 1 to 8 (a letter on the display means the tone is selected, a Dot on the display means the tone is not selected). F - Fire Tones On Fire alarm tones will be generated by the expander sounder/speaker. A - Alarm Tones On Intruder alarm, Tamper alarm and PA alarm tones will be generated by the expander speaker. F - Fault Tones On Fault tones will be generated by the expander speaker. S - Service Tone On Service and Warning tones will be generated by the expander speaker. E - Entry Tones On Entry tones will be generated by the expander speaker. X - Exit Tones On Exit tones will be generated by the expander speaker. C - Chime Tones On Chime 1, 2 and 3 tones will be generated by the expander speaker. 56 INS176
Premier 48, 88, 168 & 640 Installation Manual Programming the Control Panel 5.6 System Outputs Yes 1 Yes 3 def No 0 _ 1 2 abc 3 def 4 ghi 5 jkl 6 mno 6 mno To Program the Output Attributes (if Required) Yes Yes If X-10 Outputs are being programmed Yes Use keys 1 - 8 to select an output type or use the SCROLL key to search e.g. 1 = Digi Outputs Enter Output Number e.g. 3 Press NO to edit the attributes No Press NO to edit the House & Unit Numbers No Press NO to edit the expander text No Press YES to edit the selected option Yes Yes Yes Yes Yes Yes Yes Yes Enter Output Type e.g. 11 Enter Output Type e.g. 06 Enter Zone Number e.g. 011 Enter User Code Number e.g. 016 Enter Timer Number e.g. 7 Enter PC Control Number e.g. 4 Enter Door Control Number e.g. 4 Use keys 1 - 8 to select an attribute or use the SCROLL key to search Use keys 0 - 9 to select a House Number or use the SCROLL key to search Use the keypad to program text the same way that a mobile phone works ???? INS176 57 Yes Yes Yes Yes Yes Yes Yes Yes Press No to select/deselect the attribute Press YES to Accept and move to the Unit Number, Then use keys 0 - 9 to select a House Number or use the SCROLL key to search Yes Use keys 1 - 8 to select an area, use the AREA key to toggle between areas A to H and I to P ( 168 only) Enter Zone Type e.g. 2 (alarm) Yes Yes Yes
Page 1 and 2:
THANK YOU FOR VOTING TEXECOM INSTAL
Page 3 and 4:
Contents Premier 48, 88, 168 & 640
Page 5 and 6: Premier 48, 88, 168 & 640 Installat
Page 29 and 30: Premier 48, 88 & 168 Installation M
Page 55: Premier 48, 88, 168 & 640 Installat
Page 107 and 108:
Premier 48, 88, 168 & 640 Installat
show all

Premier 48, 88, 168 & 640 Installation Manual - PVK

Create successful ePaper yourself

Delete template?

Save as template?