Premier 48, 88, 168 & 640 Installation Manual - PVK

More documents

Recommendations

Info

System Overview Premier 48, 88, 168 & 640 Installation Manual 1. System Overview System Architecture 8 Programmable 100mA Outputs 5 Programmable Outputs (4 x 500mA & 1 Relay) ( Premier 88, 168 and 640 only) Bell/Strobe Outputs Bell Tamper Input Auxiliary Tamper Input PC and PC-Com for Local Upload/Download PC-Com Control Panels Premier 48 8 to 48 Zones ( Premier 48) 8 to 88 Zones ( Premier 88) 8 to 168 Zones ( Premier 168) 2 to 640 Zone s ( Premier 640) 8 Zone Inputs Premier 48/88/168/640 4 Wire Data Network 1 & 2 (2 = only) Premier 168 4 Wire Data Network 2-8 ( only) Premier 640 Plug on Digimodem (Com300, Com2400 or ComISDN) Plug on Radio-Pad, GSM Module 2 Zone Inputs Omi 1 2 abc 3 def 4 ghi 5 jkl 7 pqrs 8 tuv 4 Keypads ( Premier 48) 8 Keypads ( Premier 88) 16 Keypads ( Premier 168) 64 Keypads ( Premier 640) 1Programmable 100mA Output Se rv ice Premier LCD/LCDP Po we r Info. Re ady Area Menu • 8 fully programmable Double Pole or End Of Line zones • Expandable to 48 zones via keypads and zone expanders • 1 x 4-wire data network (standard 7/0.2 alarm cable) • Up to 4 keypads and 4 zone expanders • Up to 2 output modules • 4 independent areas each with 3 part arms • 4 area arm suites • 25 programmable User codes • 500 Event Log (time & date stamped) • 2 programmable panel outputs (2 x 1A ) • 1.5 Amp power supply Premier 88 • 8 fully programmable Double Pole or End Of Line zones • Expandable to 88 zones via keypads and zone expanders • 1 x 4-wire data network (standard 7/0.2 alarm cable) • Up to 8 keypads and 8 zone expanders • Up to 4 output modules • 8 independent areas each with 3 part arms • 8 area arm suites • 50 programmable User codes • 1000 Event Log (time & date stamped) • 5 programmable panel outputs (4 x 1A & 3A relay) • 2.0 Amp power supply Yes Premier 0 6 mno 9 wxyz No Omit Reset Chime Part 2 Zone Inputs 1Programmable 100mA Output PC and Modem for Remote Upload/Download Modem Alarm Receiving Centre 2 Output Modules ( Premier 48) 4 Output Modules ( Premier 88) 8 Output Modules ( Premier 168) 32 Output Modules ( Premier 640) 16 Programmable 100mA Outputs Premier OP16 4 INS176 Omit 1 2 abc 3 def 4 ghi 5 jkl 7 pqrs 8 tuv Yes 0 6 mno 9 wxyz No Part Se rv ice Chime Power Info. Omit Reset Ready Area Menu Speaker Output 4 Expanders ( Premier 48) 8 Expanders ( Premier 88) 16 Expanders ( Premier 168) 64 Expanders ( Premier 640) 8 Zone Inputs Premier 8XP 8 Programmable 100mA Outputs Speaker Output Auxiliary Input Premier 168 • 8 fully programmable Double Pole or End Of Line zones • Expandable to 168 zones via keypads and zone expanders • 2 x 4-wire data network (standard 7/0.2 alarm cable) • Up to 16 keypads and 16 zone expanders (8 per network) • Up to 8 output modules (4 per network) • 16 independent areas each with 3 part arms • 16 area arm suites • 100 programmable User codes • 2000 Event Log (time & date stamped) • 5 programmable panel outputs (4 x 1A & 3A relay) • 2.0 Amp power supply Premier 640 • Expandable to 640 zones via keypads and zone expanders • 8 x 4-wire data network (standard 7/0.2 alarm cable) • Up to 64 keypads and 64 zone expanders (8 per network) • Up to 32 output modules (4 per network) • 16 independent areas each with 3 part arms • 100 programmable User codes • 2500 Event Log (time & date stamped) • 5 programmable panel outputs (4 x 1A & 3A relay) • 2.0 Amp power supply
Premier 48, 88, 168 & 640 Installation Manual System Overview Premier 48, 88, 168 and 640 • 8 programmable digicom outputs (100mA each) • 32 character zone text • Facility for Plug-on Digimodem (Com300/2400/ComISDN) • Facility for Plug-on Paknet RP9 Radio-Pad • Facility for Plug-on GSM Module • Facility for Plug-on IP Module (ComIP/Chiron/WebWayOne) • Facility for a plug-on RedCARE/RM8 Relay Module • PC-Com/printer port Remote Keypads Premier LCD • 32 character text display • 2 fully programmable DP or EOL zones • 1 fully programmable output (100mA -ve applied) • Fully adjustable back-lighting, normally bright, dim or off, changing to bright during entry or following a key press • Built in piezo sounder • Programmable ‘Info.’ LED Premier LCDL ALL the features of the Premier LCD plus: • Larger 32 character text display • Speaker output Premier LCDP • Premier LCD with a built in Proximity Tag Reader Premier LCDLP • Premier LCDL with a built in Proximity Tag Reader Premier RKP8/16Plus • LED Arming keypad • 2 fully programmable EOL zones • CANNOT be used for Programming Zone Expanders Premier 4XP • 4 fully programmable DP or EOL zones • 2 fully programmable outputs (100mA -ve applied each) • Remotely wired Premier 8XP • 8 fully programmable DP or EOL zones • 8 fully programmable outputs (100mA -ve applied each) • Speaker output • Programmable auxiliary input • Remotely wired Premier 60IXD • 2 loops x 30 fully programmable iD zones • iD biscuit technology • Plug-on “iD” is a registered trade mark of Chloride Safety System Limited. Output Expanders Premier OP16 • 16 fully programmable outputs (100mA each) • 1 fault output (100mA -ve applied) • Can be connected to mimic panels to give zone indication • Can be connected to relays and sounders Premier RM8 Relay Module • Plug-on relay card (RedCARE footprint) • 8 separate inputs for stand alone operation • 8 x 3Amp relay outputs (n/o, n/c, com) • Output ‘ON’ LED indication Communicators Com300 • Multi-protocol communicator supporting Fast Format, Contact ID, SIA Level II and EasyCom Pager protocols • 300-baud modem for remote uploading and downloading using the Wintex UDL software and a PC • For use with an analogue telephone line (REN = 1) Com2400 • Multi-protocol communicator supporting Fast Format, Contact ID, SIA Level II and EasyCom Pager and SMS Messaging protocols • 2400-baud modem for remote uploading and downloading using the Wintex UDL software and a PC • Sends SMS text messages to mobile phones • For use with an analogue telephone line (REN = 1) ComISDN • Multi-protocol communicator supporting Fast Format, Contact ID, SIA Level II and EasyCom Pager protocols • 300-baud (analogue) or 19200-baud (digital) Modem for remote uploading and downloading using the Wintex UDL software and a PC • For use with an ISDN telephone line ComIP • Multi-protocol communicator supporting Fast Format, Contact ID and SIA Level II protocols via TCP/IP • High speed modem for remote uploading and downloading using the Wintex UDL software and a PC • For use with ADSL/DSL/Broadband/WAN/LAN etc. RP9 Radio-Pad • Paknet radio communicator supporting Fast Format and Contact ID protocols • 4800-baud modem for remote uploading and downloading using the Wintex UDL software and a PC GSM Module • Provides a GSM telephone path for Premier Digital Communicators • Sends SMS text messages to mobile phones • Arm, Disarm, Reset the alarm, turn outputs on and off, omit zones and send messages to the control panel using SMS text messages • 9600-baud modem for remote uploading and downloading using the Wintex UDL software and a PC INS176 5
Page 1 and 2: THANK YOU FOR VOTING TEXECOM INSTAL
Page 3: Contents Premier 48, 88, 168 & 640
Page 7 and 8: Premier 48, 88, 168 & 640 Installat
Page 29 and 30: Premier 48, 88 & 168 Installation M
Page 55 and 56:
Premier 48, 88, 168 & 640 Installat
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
show all

Premier 48, 88, 168 & 640 Installation Manual - PVK

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?