Premier 48, 88, 168 & 640 Installation Manual - PVK

More documents

Recommendations

Info

Programming the Control Panel Premier 48, 88, 168 & 640 Installation Manual Arming Modes Yes 1 _ Yes 1 Yes Use the SCROLL key to select an area Use keys 1 - 5 to select an arming mode e.g. 1 = Entry/Exit The way that an area arms can be configured for any of the following options: 1 - Entry/Exit The area will arm after the ‘Entry/Exit’ door has been closed and the ‘Exit Settle’ timer has expired. 2 - Exit Term. The area will arm after the ‘Entry/Exit’ door has been closed, the ‘Exit Terminator’ button has been pressed and the ‘Exit Settle’ timer has expired. 3 - Timed Exit The area will arm after the programmed ‘Exit Time’ has expired. If an ‘Exit Terminator’ zone is activated at any point during the exit mode, any remaining exit time is cancelled and the area will arm immediately. 4 - Instant The area will arm instantly. 5 - Deferred The area will arm after the programmed ‘Exit Time’ has expired. However, if any zones not on the exit route are activated during the exit mode, the ‘Exit Time’ is restarted. Area Arm Suites 38 INS176 Yes 2 abc Yes 4 ghi No 3 def Yes Use keys 1 - 8 to select an Area Arm Suite or use the SCROLL key to search e.g. 4 Press NO to edit the Part Arm Suite Use keys 1 - 8 to select an area e.g. 3 = C. Use the AREA key to toggle between areas A to H and I to P The Premier 48 has 4 Area Arm Suites the Premier 88 has 8 Area Arm Suites and the Premier 168 and 640 both have 16 Area Arm Suites. Any number of areas can be assigned to each suite. Areas assigned to an Area Arm Suite will be armed when the suite is selected, making it easier for the user to select multiple areas if required. Example Area Arm Suites could be useful in a domestic situation where the user wants to arm areas A and B at night but does not want to select each area individually. • Areas ‘A and B ‘ would be assigned to ‘Area Arm Suite 1’ • When the user wants to arm the system at night, ‘Area Arm Suite 1’ would be selected • Areas A and B are automatically selected for arming Descriptive text may also be assigned to the Area Arm Suite (see page 39 for details). Area Arm Suite Controller The suites can be assigned to keypads so that different combinations of areas can be armed or disarmed depending on which keypad is used (see page 54 for details) and operates as follows: • Keypad 1 = Area Arm Suite 1, Keypad 2 = Area Arm Suite 2, Keypad 3 = Area Arm Suite 3 etc. • When a User code is entered at a keypad, one of the ‘Area Arm Suites’ is selected (depending on which keypad was used) and the areas contained within that suite arm using the arming mode for that suite, the keypad sounder will also follow the areas defined by the suite.
Premier 48, 88, 168 & 640 Installation Manual Programming the Control Panel Area Suite Text Yes 3 def Yes 4 ghi No ???? Yes Use keys 1 - 8 to select an Area Arm Suite or use the SCROLL key to search e.g. 4 Press NO to edit the Area Arm Suite text Use keys 0 - 9 to program text the same way that a mobile phone works Text may be assigned to the Area Arm Suites to allow the user to select the suites by description instead of number. Up to 16 characters of text can be programmed for each suite. Example Text descriptions for the Area Arm Suites could be useful where more than one suite has been defined. The user wishes to arm areas A and B at night but is not too sure which suite to select. • Areas ‘A and B’ would be assigned to ‘Area Arm Suite 1’ (see page 38 for details) • When the user wants to arm the system at night, ‘Area Arm Suite 1’ would be selected • Text will be displayed to confirm that the selected suite is correct i.e. ‘Bedtime Setting’ • Areas A and B are automatically selected for armed Text is programmed in a similar way to mobile phones. Select characters by pressing the corresponding key the appropriate number of times (to select a character on the same key, press to move the cursor along). Suite Arm Modes INS176 39 Yes 4 ghi Yes 1 Yes Use the SCROLL key to select a suite Use keys 1 - 5 to select an arming mode e.g. 1 = Entry/Exit The way that an Area Arm Suite arms when selected, can be configured for any of the following options: 1 - Entry/Exit The suite will arm after the ‘Entry/Exit’ door has been closed and the ‘Exit Settle’ timer has expired. 2 - Exit Term. The suite will arm after the ‘Entry/Exit’ door has been closed, the ‘Exit Terminator’ button has been pressed and the ‘Exit Settle’ timer has expired. 3 - Timed Exit (Default for All Areas) The suite will arm after the programmed ‘Exit Time’ has expired. If an ‘Exit Terminator’ zone is activated at any point during the exit mode, any remaining exit time is cancelled and the area will arm immediately. 4 - Instant The suite will arm instantly. 5 - Deferred The suite will arm after the programmed ‘Exit Time’ has expired. However, if any zones not on the exit route are activated during the exit mode, the ‘Exit Time’ is restarted.
Page 1 and 2: THANK YOU FOR VOTING TEXECOM INSTAL
Page 3 and 4: Contents Premier 48, 88, 168 & 640
Page 5 and 6: Premier 48, 88, 168 & 640 Installat
Page 29 and 30: Premier 48, 88 & 168 Installation M
Page 37: Premier 48, 88, 168 & 640 Installat
Page 89 and 90:
Premier 48, 88, 168 & 640 Installat
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
show all

Premier 48, 88, 168 & 640 Installation Manual - PVK

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?