Premier 48, 88, 168 & 640 Installation Manual - PVK

More documents

Recommendations

Info

Programming the Control Panel Premier 48, 88, 168 & 640 Installation Manual Programming Text Text is programmed in a similar way to mobile phones. Characters are selected by pressing the corresponding key the appropriate number of times (to select a character on the same key, press to move the cursor along). The table below shows the keys to use and the characters that are assigned to them: Key Character _ 0 . , ? ! 1 @ “ - & % / + = $ : ; A B C 2 a b c D E F 3 d e f G H I 4 g h i J K L 5 j k l M N O 6 m n o P Q R S 7 p q r s T U V 8 t u V W X Y Z 9 w x y z Move Cursor Backspace (delete) Copy Text Paste Text Predictive Text Upper/Lowercase, Predictive text and Clear Screen The control panel also features Predictive text. This can be used to make inserting words easier, i.e. when spelling the word PIR, instead of typing 7444777, all that you need to do is type 747 and the word is automatically selected. This feature can be turned on and off as required by pressing the key and can also be automatically selected every time text mode is entered (see page 46 for details). Copying and Pasting When programming any items i.e. Zones, Timers, Options etc. pressing CHIME at any point will ‘Copy’ the information that has just been programmed into memory. To program another item using the information in memory, select the item and press PART to ‘Paste’ the information. Copying and Pasting can only be performed whilst in the same option i.e. if a zone has just been programmed as Guard 1/Omit/Access/Areas-ABC, ALL of that information can be copied into memory so that when another zone is selected, the same information can then be quickly pasted to the other zone. The information held in memory after programming an item can only be pasted into an item of the same type and cannot be used once another option is selected i.e. Zone programming information cannot be pasted into Timers etc. Log Off Engineer Whenever the Engineer Programming menu is exited by pressing twice, the display will look like this: This message will remain on the display until the Engineer logs out of the Programming menu. To log out of Engineer Programming menu, proceed as follows: Enter an Engineer code , the display should look like this: Press or , the display should look like this: Press to return to normal, the display will look something like this: The Engineer is now logged out of the Programming menu. Resetting the Engineers Code (User 00) If the Engineer code (User 00) has been lost or forgotten, it can normally be reset back to the factory default of . However, this can only be done if the NVM has not been locked (see page 46 for details). To Reset the Engineer code (User 00): ENSURE THAT THE LID TAMPER IS CLOSED Hold down the ‘Factory Default’ button for 6 seconds (with the control panel still powered), after 6 seconds, the sounders/keypads will bleep to indicate that the Engineer code has been reset. 32 INS176 NO other codes/programming will be affected, it is just the User 00 Engineer code that will be reset. The Engineer (User 00) code can only be reset, if the NVM has not been locked (see page 46 for details). Other Things to Know • After entering a zone number (step 3), pressing AREA will jump straight to the ‘Zone Areas’ • When programming text, pressing OMIT will jump straight to the ‘predictive Text’
Premier 48, 88, 168 & 640 Installation Manual Programming the Control Panel 5.1 Zone Setup Reset Reset Yes ??? Yes Reset Reset Reset Yes Yes Yes Yes Yes Enter zone number e.g. 004 = Zone 004 Press NO to edit the zone type Use hotkeys 1 - 8 to select a zone type or use the SCROLL key to search e.g. 3 = Guard No 3 def Press NO to edit the zone attributes 1 No Press NO to edit the zone attributes 2 No Press NO to edit the zone areas No Press NO to edit the zone text Use keys 1 - 8 to select an attribute or use the SCROLL key to search Use keys 1 - 8 to select an area e.g. 2 = B. Use the AREA key to toggle between areas A to H and I to P Use keys 0 - 9 to program text the same way that a mobile phone works e.g. 7, 444, 777 = PIR INS176 33 2 abc No 7 pqrs Press NO to Change the Chime type No Use keys 1 - 8 to select an attribute or use the SCROLL key to search Press NO to Change the Chime type No Yes Yes Yes Yes Press NO to select/deselect the attribute No Press NO to select/deselect the attribute No Yes Yes
Page 1 and 2: THANK YOU FOR VOTING TEXECOM INSTAL
Page 3 and 4: Contents Premier 48, 88, 168 & 640
Page 5 and 6: Premier 48, 88, 168 & 640 Installat
Page 29 and 30: Premier 48, 88 & 168 Installation M
Page 31: Premier 48, 88, 168 & 640 Installat
Page 83 and 84:
Premier 48, 88, 168 & 640 Installat
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
show all

Premier 48, 88, 168 & 640 Installation Manual - PVK

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?