Premier 48, 88, 168 & 640 Installation Manual - PVK

Quick Reference Guide Premier 48, 88, 168 & 640 Installation Manual
Global Options
Speaker Tones
PC Output Text
Use to select a tone type, to turn the tone on/off, to accept
Use to select an Output, to edit, - to select characters (press the required
key the appropriate number of times), to accept
Custom O/P Text Use to select an Output, to edit, - to select characters (press the required
key the appropriate number of times), to accept
Keypad Setup
Areas
Use - to select keypad, to select network, to edit, - to select
an area, ( = all areas, = areas A – H and I –P), to accept
Zone Mapping Press to edit, - to enter zone number, to accept, Repeat for 2nd Options
zone
Press to edit, to select an option, to change the option, to accept
P = PA Enabled A = PA is Audible
Volume
Sounder Options
F = Fire Enabled D = PA is Delayed
F = Medical Enabled Q = Quick Arm On
T = Tamper Enabled O = Info.LED>Output
Press to edit, - to enter a value, to accept
Press to edit, to select an option, to change the option, to accept
F = Fire Tones Enabled E = Entry Tones Enabled
A = Alarm Tones Enabled
F = Fault Tones Enabled
S = Service Tones Enabled
X = Exit Tones Enabled
C = Chime Tones Enabled
K = Use Keypad Areas
Areas
Text
Expander Setup
Use - to select expander, to select network, to edit, - to select
an area, ( = all areas, = areas A – H and I –P), to accept
Press to edit text, - to select characters (press the required key the
appropriate number of times), to accept
. , ? ! 1 @ “ - M N O 6 Move Cursor
A B C 2 P Q R S 7 Copy Text to Memory
D E F 3 T U V 8 Paste Text from Memory
G H I 4 W X Y Z 9
Auxiliary Input
J K L 5 0 _
Press to edit, - to select an input type, to accept
Not Used Silence Sounders
Volume
Sounder Options
Auxiliary Tamper Global Omit Key
Bell Tamper Local Omit Key
Remote Reset PSU Fault
Line Fault +ve Defer Auto Arming
Line Fault +ve
Press to edit, - to enter a value, to accept
Press to edit, to select an option, to change the option, to accept
F = Fire Tones Enabled E = Entry Tones Enabled
A = Alarm Tones Enabled
F = Fault Tones Enabled
S = Service Tones Enabled
X = Exit Tones Enabled
C = Chime Tones Enabled
Panel Outputs
Digi Outputs
Com? Channels
RedCARE Pins
Keypad Outputs
Expander Outputs
System Outputs
Upper, Lower Case, Predictive
Text & Numerical
Use - to select an output, to edit, - to enter an output group,
- to enter output type, to accept
Use - to select device, to select network, to select an output, to
edit, - to enter an output group, - to enter output type, to accept
Custom Outputs Use to select output, - to select a switch, to edit, - to enter an
output group, - to enter output type, to accept
X-10 Outputs Use - to select an output, to edit, - to enter an output group,
- to enter output type, - to enter House/device Number, to accept
102 INS176