Modification Application Form - Transport Tasmania

PAGE 4 OF 7 MODIFICATION APPLICATION
6. SUSPENSION (Write “standard” if unchanged from manufacturers original specifications)
Proposed front suspension details; (Circle applicable)
Springs – make/model ____________/_______________
Transverse Leaf/Parallel Leaf/Coil Spring/Coil over Shock Absorber/Torsion Bar, Other______________
____________________________________________________________________________________
Shock absorbers - make/model ___________________________/_____________________________
Ride height: standard _____________________ mm/in. proposed ________________________ mm/in.
Proposed rear suspension details; (Circle applicable)
Springs – make/model ____________/_______________
Transverse Leaf/Parallel Leaf/Coil Spring/Coil over Shock Absorber/Torsion Bar, Other______________
____________________________________________________________________________________
Shock absorbers - make/model ___________________________/_____________________________
Ride height: standard _____________________ mm/in. proposed ________________________mm/in
Note: Ride height is measured from the centre of the axle to the underside lip of the guard with the
vehicle in its normal operating and unladen state.
7. STEERING (Write “standard” if unchanged from original specifications)
Proposed modifications
Sourced from - Make/Model _____________________________/__________________________
Unmodified Rack & Pinion/Modified Rack and Pinion/ Recirculating Ball/Unmodified Steering Linkages &
Arms/Other________________________________________________________________________
__________________________________________________________________________________
Produced by Vehicle Operations Branch
10 Murray Street, Hobart Tas 7000 Revised 01/06/12
Telephone: (03) 6233 5347 Modification Application Form.doc