arthroscopy power

ARTHROSCOPY 

POWER 

PRODUCTS 

CATALOG 

ARTHROSCOPY POWER PRODUCTS

Ordering Information.................................................................. H.2 

Product Support.......................................................................... H.3 

Product Support and Service Programs ....................................... H.4 

Service Programs ........................................................................ H.5 

Return/Repair Information.......................................................... H.6 

Consoles..................................................................................... H.7 

Handpieces................................................................................. H.8 

PowerPro ® Electric II Handpieces ................................................ H.9 

PowerPro Handpieces ............................................................... H.10 

PowerPro Electric II Attachments ............................................. H.11 

PowerPro Electric II Attachments and Accessories ..................... H.12 

PowerPro Accessories...................................................... H.13, H.14 

Series 4 ® Handpieces and Attachments ..................................... H.15 

Arthroscopy Accessories.................................................. H.16- H.21 

Large Hub Shaver Blades ............................................... H.22 - H.25 

Large Hub Burs and Routers............................................ H.26, H.27 

Micro Hub Blades .......................................................... H.28 - H.30 

Micro Hub Burs and Routers ..................................................... H.31 

Micro Burs....................................................................... H.32, H.33 

Blades and Drills for Patellar Tendon Graft Guide System .......... H.34 

Saw Blades - Freehand.............................................................. H.35 

Graft Harvesting and Preparation.............................................. H.36 

ACL Blades...................................................................... H.37, H.38 

Tunnel Preparation and Graft Passage ............................. H.39, H.40 

Graft Fixation............................................................................ H.41 

Micro Sagittal Saw Blades .............................................. H.42 - H.51 

Micro Oscillating Saw Blades ......................................... H.52 - H.56 

Numerical Index............................................................. H.58 - H.63 

Alphabetical Index ......................................................... H.64 - H.69 

CONTENTS 

Customer Service: (within U.S.) Phone: 800.237.0169 • Fax 727.399.5256 • Customer Service: (outside U.S.) Phone: 727.392.6464 • Fax: 727.397.4540 ARTHROSCOPY POWER PRODUCTS, H.1

Terms 

Linvatec Corporation’s standard terms are net thirty (30) days, F.O.B. 

shipping point, unless otherwise approved in writing by Linvatec. All orders 

and transactions are subject to the laws of the state of Florida. 

To Place Your Order 

Please provide a purchase order number, billing and shipping instructions, 

terms, product catalog number and description, quantity and pricing to one 

of the following: 

Your Sales Representative 

Customer Service (Within U.S.) 

Phone: 800-237-0169 

Fax: 727-399-5256 

E-mail: cust_serv@linvatec.com 

Customer Service (Outside U.S.) 

Phone: 727-392-6464 

Fax: 727-397-4540 

E-mail: cust_serv@linvatec.com 

Linvatec Corporation 

Attn: Customer Service 

11311 Concept Boulevard 

Largo, FL 33773-4908 USA 

Ordering Information 

True Purchasing Flexibility 

Linvatec Financial Services offers a variety of flexible financing programs from 

leases to procedure fees to delayed payment plans. Ask your Sales Representative 

for more information on how you can acquire the latest technology through 

a financing program that fits your unique budgetary requirements. 

Rental Kits 

In every O.R., there are times when you have to schedule a case but do not 

have the equipment needed. Either the capital funding for the equipment 

has yet to be approved or you have been unable to justify the cost of the 

equipment due to the procedure’s low volume. 

For these situations, Linvatec offers a rental program for procedure-specific 

Instruments and powered equipment. One toll free phone call, to Linvatec 

Rentals at 888-587-9742, and everything that you need for the case is on its 

way. 

To enroll in a rental program contact your Sales Representative. Your 

representative will help you customize the kits to fit your procedural 

requirements. After the case, simply return the Instruments sterilized, if 

appropriate, along with any disposables you did not use. You will be billed 

only for the rental fee and for the disposables not returned. 

H.2, ARTHROSCOPY POWER PRODUCTS Customer Service: (within U.S.) Phone: 800.237.0169 • Fax 813.399.5256 • Customer Service: (outside U.S.) Phone: 727.392.6464 • Fax: 727.397.4540

At Linvatec Corporation, we want to offer more than a quality product. We 

take pride in being able to provide you with value added services to support 

our products. The information given in this catalog is designed to address 

your questions regarding product support. 

Customer Support 

If you encounter a problem or need technical assistance, contact Customer 

Service or your Sales Representative. Refer to the Customer Service 

telephone numbers listed. 

Regulatory Compliance 

Report any injuries or malfunctions to Linvatec Customer Service. Refer to 

the Customer Service telephone numbers listed. 

Original Warranty 

Linvatec Corporation (“the Company”) warrants to the first purchaser or 

lessee (“Customer”) that the Instruments, attachments and parts 

manufactured by or for the Company (hereinafter collectively “Instruments”) 

have been tested, inspected, and shipped in proper working order. 

The Company warrants all new Instruments to be free from defects in materials 

and workmanship for the following periods, measured from date of sale: 

Original Warranties 

Powered Surgical Instruments ..................................... 12 Months 

PowerPro ® Attachments.............................................. 12 Months 

Burs/Burrs and Blades ............................................. Upon Receipt 

Handpiece Cords and Power Cords............................... 6 Months 

Pneumatic hoses........................................................... 6 Months 

Bur guards, blade guards, attachments ......................... 6 Months 

Battery Packs ................................................................ 3 Months 

Battery Chargers ......................................................... 12 Months 

Skull Perforators ........................................................... 6 Months 

Camera Consoles........................................................ 12 Months 

Video Components..................................................... 12 Months 

Video Cables and Light Guides ..................................... 3 Months 

Non-autoclavable Camera heads ................................ 12 Months 

Envision 1 /4” Autoclavable Camera Heads ................ 500 uses or 

12months, whichever comes first 

Envision Autoclavable 3CCD Camera Heads ............... 12 months 

Shutt Non SLG Instruments ........................................ 12 Months 

Footswitches............................................................... 12 Months 

Irrigation Systems (pump and sensor) ......................... 12 Months 

Reusable Procedure Specific Instruments..................... 12 Months 

Product Support 

Following the Original Warranty, Linvatec offers additional warranty and 

service programs that support our products throughout their lifetime. Service 

programs address the necessity to control cost and greatly reduce repair 

turnaround time by eliminating the need for repair quotes. Products not 

covered under a service program are subject to variable repair charges that 

typically result in significantly higher repair costs. To find out which service 

option best meets your needs, contact your local Sales Representative. 

Service Agreements 

Service Agreements provide additional warranty coverage on capital 

equipment. This additional warranty period covers all repair costs, provides 

for free loaner usage (upon availability) during repair time and covers freight 

charges out from Linvatec both on the loaner product and the repaired 

Instrument. You are responsible for the freight charges in for both the 

Instrument needing repair and the return shipment of the loaner. Options 

are available that allow for purchasing one (1) year or two (2) year 

additional warranty coverage. 

Service Warranty 

At the end of the Original or Service Agreement period, Instruments may 

still be returned to Linvatec for repair at the Customer’s expense. Linvatec 

warrants that any service or repair work performed by Linvatec shall be free 

from defects in workmanship and materials for a period of 90 days after the 

date the Customer receives the Instrument(s). This limited warranty applies 

only to the actual service or repair work performed by Linvatec authorized 

service centers. Linvatec warrants that all parts and assemblies used in the 

repair or service of Instruments meet new part functional specifications, 

although some parts or assemblies may have been remanufactured. 

Linvatec components are manufactured to exacting tolerances and design 

specifications. As a standard practice, all repairs are subject to strict product 

performance and testing specifications prior to returning the Instrument to 

the Customer. Linvatec ensures that each Instrument is inspected according 

to the guidelines used for new manufactured Instruments. If an Instrument is 

determined unrepairable, Linvatec will offer to sell to the Customer a 

refurbished or brand new Instrument or comparable equivalent to the 

Customer at a preferential price. All parts and assemblies replaced by 

Linvatec shall become the property of Linvatec 

Repair Quotes 

Repair quotes needed on products not covered by a warranty should be 

requested when calling Customer Service to initiate an RG (refer to 

Return/Repair section). If a quote is not requested, the repair will be 

processed and your account billed accordingly provided the repair is not 

covered under warranty. 

Minimum Service Charge 

There is a minimum repair charge of $100 (except for products covered 

under warranty). This charge applies to the evaluation and testing completed 

on the Instrument. 


Warranty Terms 

Product Support and 

Service Programs 

If the Customer discovers within the warranty period (original or Service 

Agreement) that an Instrument has a defect in materials and/or 

workmanship, the customer must promptly notify the Company. Also, if the 

Customer discovers within the service warranty period that any service or 

repair work performed by Linvatec has a defect in workmanship and/or 

materials, the customer must promptly notify the Company. If it becomes 

necessary to return the Instrument to the Company, the Customer must (a) 

acquire a “Returned Goods” authorization from the Company Customer 

Service Department, (b) pack the unit carefully, and (c) return it to the 

Company via air freight, prepaid. 

Within a reasonable time after receipt of the Instrument, the Company will 

investigate and correct any defect covered by warranty by providing, at its 

option, one of the following: service or repair of the Instrument, a 

replacement of the Instrument, or a refund of the purchase price of the 

Instrument. All parts and assemblies replaced by Linvatec shall become the 

property of Linvatec. These remedies are the Customer’s exclusive remedies 

under the warranty. 

The foregoing limited warranties do not apply to: 

• Instruments that have been tampered with, altered, abused, neglected, 

or misused. 

• Instruments damaged through use with other than Company authorized 

accessories, attachments, burs or blades. 

• Instruments not manufactured by or for the Company. 

• Instruments used for purposes other than those for which they were 

designed and manufactured, including use in any way inconsistent with 

the instructions and warnings contained in the Company instruction 

manuals and package inserts. 

• Instruments that were last serviced, refurbished, reprocessed or 

reconditioned by a nonauthorized service entity. 

THE FOREGOING LIMITED WARRANTIES ARE IN LIEU OF ALL 

OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT 

NOT LIMITED TO, THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 

In no case shall the Company be liable for any special, incidental or 

consequential damages based upon breach of warranty or any other legal 

theory. Some jurisdictions do not allow limits on warranties, or on remedies, 

and, in such jurisdictions, the limits in this and the preceding paragraphs may 

not apply. 

The Company reserves the right (a) to make design changes to Instruments at 

any time without notice to Customer and without incurring any obligation to 

incorporate those changes into Instruments previously purchased or leased, and 

(b) to make changes from time to time in the contents of any publication, 

instruction manual or package insert without any obligation to notify 

Customers of such revisions or changes, and (c) to change price without notice. 

Additional Service Programs 

R.A.P.I.D. 

Linvatec’s R.A.P.I.D. (Replacement Arthroscope/Endoscope with Priority for 

Immediate Delivery) program is designed to minimize downtime and 

inconvenience when a Linvatec reusable scope is damaged. Linvatec will 

replace reusable scopes covered under this program on an exchange basis, 

via overnight delivery, subject to availability. 

RAPID Program Guidelines: 

1. Linvatec will replace the damaged scope via overnight shipment (subject 

to availability) with a model of equal quality. Linvatec Customer Service 

must receive the request prior to 4:30 p.m. EST for next business day 

delivery. A customer purchase order is required. 

2. An invoice up to list price will be issued. It is your responsibility to return 

the damaged scope to Linvatec within fifteen (15) working days. The 

returned scope will be evaluated and, if repairable, a credit will be issued 

for the salvage value (as determined by Linvatec) of the damaged scope. 

3. If the damaged scope cannot be refurbished, credit will not be issued and 

you will be notified. 

4. Linvatec reserves the right, from time to time, to modify the list of scopes 

being covered under this program. 

For additional information, contact your Sales Representative or Linvatec 

Customer Service at 800-237-0169. 

Advance Payment R.A.P.I.D. 

Linvatec’s Advance Payment RAPID (Replacement Arthroscope/Endoscope 

with Priority for Immediate Delivery) program is designed like the RAPID 

program, but is intended to capitate scope repair costs. Under the program, 

customers will pre-pay a fee based on the number of their Linvatec scopes. 

Linvatec will replace damaged scopes up to four (4) times [the number of 

scopes covered under the agreement per year]. 

Advanced Payment RAPID Guidelines 

1. Customer must sign an agreement for one (1), two (2), or three (3) years. 

2. Upon signing the agreement, an invoice will be issued for the amount of 

the agreement. 

3. Linvatec will replace the damaged scope via overnight shipment (subject 

to availability) with a model of equal quality. Linvatec Customer Service 

must receive the request prior to 4:30 p.m. EST for next business day 

delivery. A customer purchase order is required. 

4. A zero-dollar invoice will be issued. It is your responsibility to return the 

damaged scope to Linvatec within ten (10) working days. 

5. If the damaged scope is not received within ten (10) working days, you 

will be invoiced $1,500.00, which is not refundable. 

6. This program does not currently cover 1.9mm small joint scopes. Linvatec 

reserves the right, from time to time, to modify the list of scopes being 

covered under this program. 


Envision Flat Rate R.A.P.I.D. Repair 

Linvatec’s Envision Flat Rate Repair program is an alternative to the standard 

R.A.P.I.D. program. Our Flat Rate program is designed for hospitals that still 

require a 24-hour placement but want a price cap on repair costs. 

For a flat rate, Linvatec will provide a replacement scope within 24 hours. 

This program keeps scope repair simple and convenient. 

Program Guidelines: 

1. Customer will sign an agreement stating they will use the Linvatec Flat 

Rate program and agree to have scopes only serviced by a Linvatec 

authorized repair facility. 

2. Linvatec will replace the damaged scope with a model number of equal 

quality using next business day delivery service. To ensure next business 

day delivery, Linvatec Customer Service must receive the request by 4:30 

p.m. EST. A Customer purchase order is required. 

3. An invoice at up to list price will be issued. It is your responsibility to 

return the damaged scope to Linvatec within fifteen (15) working days for 

evaluation. The returned scope will be evaluated and a credit will be 

issued (the difference between the invoiced price and the flat rate repair 

price). 

4. If the scope has been previously repaired by a facility other than an 

authorized Linvatec repair center, the warranty will be void and a credit 

will not be issued. 

For additional information, call your Sales Representative or Customer 

Service at 800-237-0169. 

Clear Repair 

Pay-For-Service Repair Program for Damaged Arthroscopes /Endoscopes 

Linvatec’s Clear Repair program is another alternative to our R.A.P.I.D. 

program. With Clear Repair, you will receive the same scope after it is 

repaired to its original specifications. All repairs are warranted in accordance 

with our service warranty period (refer to section Service Warranty Period). 

Processing a Clear Repair: 

1. Call your Linvatec Sales Representative or Customer Service to obtain a 

Return Goods number for a repair through the Clear Repair program. 

When you are issued your RG number, you will be advised of the location 

where to send your Instrument. 

2. Mail the damaged scope in a shipping carton provided by your 

Sales Representative. 

3. The Linvatec Repair Coordinator will present you with a quote within 24 

hours of receiving the damaged scope: 

• The repair quote is based on the repair required. Prices are estimates only. 

• Approval of the repair quote is required. 

Service Programs 

4. If the scope is severely damaged, you may choose between a replacement 

through our R.A.P.I.D. program or having the scope repaired. 

5. If the scope cannot be repaired, a new or refurbished scope will be 

offered. 

6. The scope is returned to you within 5-10 working days of Customer 

approval. 

For additional information, contact your local Sales Representative or 

Linvatec Customer Service at 800-237-0169. 

Loaner Program 

Linvatec’s loaner program is designed to minimize downtime and 

inconvenience when an essential product needs off-site servicing. 

Loaners are available for most capital products. Loaners are available at no 

charge during the warranty period (includes both original and extended 

warranty) A nominal loaner charge is associated with products not covered 

by a warranty. 

Program guidelines: 

1. Linvatec will strive to send the same model number as your unit but 

reserves the right to send a different model. 

2. Loaners, if available, will be sent using next business day delivery service. 

To ensure next business day delivery, Linvatec Customer Service must 

receive all loaner requests prior to 5:30 p.m. EST. 

3. For warranted products, Linvatec will pay freight charges out (includes 

both the loaner unit and the repaired unit). You are responsible for freight 

charges in (includes both the unit needing repair and the return shipment 

of the loaner unit). 

4. A loaner unit will be considered delinquent if any of the following 

conditions are met: 

• If the loaner is not returned within fourteen (14) calender days after 

shipment of your repaired Instrument 

• If the loaner is not returned within seven calendar (7) days after your 

rejection of a quoted repair price 

• If your Instrument needing repair is not received at Linvatec within 

fourteen (14) calendar days of loaner shipment 

5. Linvatec reserves the right, at its sole discretion, to charge non-refundable late 

fees and/or to charge up to full list price for any loaner product which is not 

returned on time or which is damaged due to customer misuse or negligence. 

6. Linvatec reserves the right to ask cash-in-advance and credit card 

customers to pay the standard repair charges and loaner fees (if 

applicable) prior to shipping a loaner. 


Procedure for Returns/Repairs 

1. All Instruments must be cleaned and sterilized, if appropriate, prior to 

return of any Instrument to Linvatec. Instruments contaminated with 

biohazardous materials will be returned to you at your expense. 

2. An authorized Return Goods (R.G.) Number must be obtained prior to 

returning any Instrument for repair/return. 

3. To return a product for repair, contact Linvatec Customer Service. The 

following information is needed to process a repair/return: 

• Catalog Number 

• Serial/Lot Number (if applicable) 

• Original Invoice Number 

• Detailed description of the problem or reason for return 

4. The R.G. number must be displayed on the outside of the box, included 

with all paperwork, and must be referred to when making an inquiry 

about the status of a repair/return. 

5. Linvatec maintains various repair centers around the world. When you are 

issued your R.G. number, you will be advised of the location where to 

send your product. 

Ship returns only to: 

Linvatec Corporation 

Attn. Return Goods Department 

11155 Concept Boulevard 

Largo, FL 33773-4908 USA 

Return Terms 

If it becomes necessary to return a product after purchase, the product must 

be returned within 45 days of ship date. Returns must be shipped prepaid 

freight. Returns that are not shipped prepaid freight will not be accepted. All 

product returns, except those attributable to a Linvatec error, are subject to a 

restocking fee of 15% of the purchase price or $25, whichever is greater. 

Products Not Eligible for Credit: 

• Sterile products/disposables returned with the outer packaging seals broken 

• Non-sterile products that have been sterilized and/or placed in the 

surgical field 

• Products damaged by customer misuse or negligence 

• Altered or customized products 

• Products purchased through a sales promotion 

• Products damaged in return transit due to inadequate packaging 

• Less than full packages – all products must be in original packaging 

• Obsolete products 

Return/Repair Information 

Products purchased under “True Purchasing Flexibility” or Linvatec Financial 

Services programs may have different return guidelines depending on the 

program selected. 

Packaging 

Whenever it is required to return your product, be sure to package it in a 

protective carton. We recommend that you save the original shipping 

container for this purpose. In-transit damage is not covered by the warranty; 

therefore, it is best to always insure shipments. 

Return Shipping 

All repaired products will be returned to you via second day air delivery 

unless you request an alternate shipping method. The cost of return shipping 

is your responsibility unless the product is under a warranty. 


Customer Service: (within U.S.) Phone: 800.237.0169 • Fax 727.399.5256 • Customer Service: (outside U.S.) Phone: 727.392.6464 • Fax: 727.397.4540 ARTHROSCOPY POWER PRODUCTS, H.7 

Cat. No. 

Advantage ® Console with Cord 115 Volt .......................................................... D3000 

Height 5 1 /8” (13cm), Width 17” (43.2cm), 

Depth 13” (35cm), Weight 19.5lbs (8.86kg) 

Advantage Console with Cord 230 Volt .......................................................... D3000I 

Height 5 1 /8” (13cm), Width 17” ( 43.2cm), 


Advantage Console with Cord 100 Volt .......................................................... D3000J 

Height 5 1 /8” (13cm), Width 17” ( 43.2cm), 


Operates: Advantage Shavers, Apex ® Shavers, PowerPro ® Electric Handpieces, MicroChoice ® 

Handpieces, Mini-Driver Handpiece and E9000 ® Handpieces 

E9000 ® Console with Cord 115 Volt.................................................................. E9000 

Height 4.63” (29.25cm), Width 11.75” (11.76cm), 

Depth 12.25” (31.11cm), Weight 15.4lbs (7.0kg) 

E9000 Console with Cord 230 Volt................................................................. E9000G 



E9000 Console with Cord 100 Volt .................................................................. E9000J 



Operates: Advantage Shavers, Apex Shavers, MicroChoice Handpieces, 

Mini-Driver Handpiece and E9000 Handpieces 

3-Pedal Footswitch........................................................................................... C9863 

For use with Advantage, E9000 and PowerPro Consoles 

2-Pedal Footswitch...................................................................................... 5020-053 


Universal Handpiece Cord............................................................................. MC5057 


12’ (3.6m) 

Operates: MicroChoice, PowerPro, E9000 and MC Shaver Handpieces 

Consoles

Handpieces 

Cat. No. 

Advantage ® Shaver, No-Button ........................................................................ D9820 

Forward Speed 500-10,000rpm 

Oscillate Speed 500-2,500cpm, Single- and multi-turn oscillate 

For use with Large Hub Shaver Blades and Burs 

For use with Advantage, E9000 ® and PowerPro ® consoles 

Weight: 15.8 oz. (450g) 

Advantage Shaver, Two-Button ........................................................................ D9824 



For use with Large Hub Shaver Blades and Burs 

For use with Advantage, E9000 and PowerPro consoles 

Weight: 15.8 oz. (450g) 

MicroChoice ® Micro Shaver........................................................................... MC9840 



For use with Micro Hub Small Joint Blades and Burs 


Weight: 8.4 oz. (237g) 

MicroChoice Elite High Speed Drill........................................................... 5020-025 

Electric 

Stainless Steel and Aluminum 

Max Standard Operating Speed 100,000rpm 

Torque 2in-oz 

Weight 7oz (196g) 

MicroChoice Medium Speed Drill ................................................................ 5020-021 

Electric 


Max Standard Operating Speed 25,000rpm 

Torque 6in-oz 

Weight 7oz (196g) 

MicroChoice Medium Bur Guard ................................................................. 5020-060 

Stainless Steel 

Use with 5091 Series Burs 

For use with 5020-025, 5020-021 Handpieces 

MicroChoice Oscillating Saw ....................................................................... 5020-024 

Electric 


Standard Operating Speed 25,000cpm 

Stroke Arc 8º 

Weight 8.0oz (224g) 

MicroChoice Sagittal Saw ............................................................................ 5020-022 

Electric 


Standard Operating Speed 20,000cpm 

Arc 4º 


Surgairtome Two ® ........................................................................................ 5058-001 

Pneumatic 


Operating Pressure 100psi 

Operating Speed 95,000rpm 

Torque 1.75in-oz 


Use with 5052-010 Universal Hose 

Micro100 Drill............................................................................................ 5053-009 

Pneumatic 


Operating Pressure 100psi 

Operating Speed 500-20,000rpm 

Torque 6in-oz 


Use with 5052-010 Universal Hose 

Micro100 Medium Bur Guard...................................................................... 1375-012 


Overall Length 1.8” (4.57cm) 

Use with 5091 Series Burs 

For use with 5053-009, 5058-001 Drills 

Replacement Safety Slide............................................................................. 5020-057 

For MicroChoice Handpieces 

Replacement Handpiece Lever..................................................................... 5020-058 

For MicroChoice Handpieces 

Micro100 Foot Control................................................................................ 1375-028 



Cat. No. 

PowerPro Electric II Modular Handpiece ...................................................... PRO6100 

Electric 

Modular Collet 


Variable Speed 0-1275rpm 

Weight 1.31lbs (610g) 

PowerPro Two-Trigger Handpiece ............................................................. PRO2200E 

Electric 

Modular Collet 


Variable Speed 0-750rpm 


PowerPro Electric II Oscillator Handpiece..................................................... PRO6125 

Electric 

Wrenchless Collet 

Stainless Steel and aluminum 

Maximum Variable Speed 11,000cpm 

4.5º Arc 


PowerPro ® Electric II 

Handpieces

PowerPro ® Handpieces 

Cat. No. 

PowerPro ® Battery Modular Handpiece........................................................ PRO5100 

Battery Operated 

Modular Collect 


Max Variable Speed w/PRO3010 Battery: 950rpm 

Max Variable Speed w/PRO3020 Battery:1250rpm 

Weight: 2.1 Lbs (953g) 

PowerPro Battery 2-Trigger Full-Function Handpiece................................... PRO5200 


Modular Collect 




Weight: 2.1 Lbs (953g) 

PowerPro Battery Oscillator Handpiece........................................................ PRO5300 


Wrenchless Collet 


Maximum Variable Speed 11,500cpm 

4.5º Arc 

Weight: 2.35 Lbs (1.06Kg) 



Attachments 


Cat. No. 

PowerPro Electric II Pin Driver...................................................................... PRO6032 


Accepts Wires from 2.0mm (.078”) to 3.2mm (.125”) 

For use with PRO6100 

PowerPro Electric II Wire Driver ................................................................... PRO6028 


Accepts Wires from .71mm (.028”) to 1.57mm (.062”) 


PowerPro Pin Driver Attachment ................................................................ PRO2032 


Accepts pins from 1.57mm (.062”) to 4.0mm (.156”) 

For use with PRO2200E 

PowerPro Wire Driver Attachment............................................................... PRO2028 


Accepts pins from .71mm (.028”) to 1.57mm (.062”) 

For use with PRO2200E 

PowerPro Battery Pin Driver Attachment .................................................... PRO5032 


Accepts pins from 1.57mm (.062”) to 4.0mm (.156”) 

For use with PRO5100, PRO5200 and PRO5250 

PowerPro Battery Wire Driver Attachment................................................... PRO5028 


Accepts Wires from .71mm (.028”) to 1.57mm (.062”) 

For use with PRO5100, PRO5200 and PRO5250


Attachments and 

Accessories 

Cat. No. 

PowerPro 5 /32” Jacobs Chuck ....................................................................... PRO2030 


3.9mm Cannulation 

PowerPro Sagittal Saw Attachment.............................................................. PRO2043 


Uses 5023-XXX Hall ® Sagittal blades 

Wrenchless 

Blade Oscillation: 15,800cpm 

Stroke: 4º Arc 

PowerPro 1 /4” Jacobs Chuck Attachment ..................................................... PRO2041 



PowerPro 1 /4” Keyless Chuck........................................................................ PRO2250 



PowerPro 1 /8” Keyless Chuck ....................................................................... PRO6050 



PowerPro Zimmer/Hudson Drill ................................................................... PRO2046 



PowerPro Battery Charger ........................................................................... PRO3600 

For use with: 

PRO3010 and PRO3020, NiCAD Batteries 

PRO3135 Sterile Transfer Platform 

PRO3115 NiMH Sterile Transfer Battery 

PRO3200 SureCharge Case 


Cat. No. 

PowerPro Large Battery ............................................................................... PRO3010 

For use with all PowerPro Battery Handpieces 

NiCAD 

PowerPro Small Battery ............................................................................... PRO3020 

For use with all PowerPro Battery Handpieces 

NiCAD 

Sterile Transfer Battery*............................................................................... PRO3115 

For use with all PowerPro Battery Handpieces and 

PRO3110 Sterile Transfer Battery Case 

NiMH 

* Do Not Sterilize 

Sterile Transfer Battery Case ........................................................................ PRO3110 

For use with all PowerPro Battery Handpieces and 

PRO3115 Sterile Transfer Battery 

Sterile Transfer Shroud................................................................................. PRO3130 

For use with PRO3110 Sterile Transfer Battery Case 


PowerPro ® Accessories 


PowerPro ® Accessories 

Batteries not 

included 

Cat. No. 

Sterile Transfer Platform............................................................................... PRO3135 

For use with PRO3115 on PRO3600 

SureCharge Case........................................................................................ PRO3200 

For use with PRO3110 and PRO3020 on PRO3600 

SureCharge Filter Paper ............................................................................... PRO3205 


50/Pack 

PowerPro Sterilization Case ......................................................................... PRO5090 

Holds: Three PowerPro Handpieces and Twelve Attachements 

For use with all PowerPro Battery and Electric Components 


Series 4 ® Handpieces 

and Attachments 


Cat. No. 

Series 4 Oscillating Saw ............................................................................... 5067-002 

Pneumatic 


Required: 

Lubrication: No 

Pressure: 100psi 

Speed: 

Operating: 14,000cpm 

Use 5071-XXX Blades 

Series 4 Trauma Drill.................................................................................... 5067-004 

Pneumatic 

Trinkle/AO Collet 


Required: 

Lubrication: No 

Power: 100psi 

Speed: 

Drill: 650rpm 

Screw: 250rpm 

Torque: 

Drill: 35in-lbs 

Screw: 18-22in-lbs 

Trinkle to 1 /4” Jacobs, Long Adapter ............................................................ 1368-008 


For use with Versipower ® Plus Drill, Series 4 Trauma Drill 

Trinkle to 1 /4” Jacobs, Short Adapter ........................................................... 1368-010 


For use with Versipower Plus Drill, Series 4 Trauma Drill 

Trinkle to 5 /32” Jacobs Adapter .................................................................... 1368-005 



Trinkle to Zimmer Adapter .......................................................................... 1384-078 



Trinkle to Wire Driver Adapter .................................................................... 5040-011 



Trinkle to Two-Way Pin Driver, Trinkle Adapter............................................ 5052-019 


For use with Versipower Plus Drill, Series 4 Trauma Drill

Arthroscopy Accessories 

H.16, ARTHROSCOPY POWER PRODUCTS Customer Service: (within U.S.) Phone: 800.237.0169 • Fax 813.399.5256 • Customer Service: (outside U.S.) Phone: 727.392.6464 • Fax: 727.397.4540 

Cat. No. 

AC Power Cord ........................................................................................... 5039-003 

1 /4” Jacobs Chuck Key............................................................................ 5044-999-52 


1/Box 

For use with 1 /4” Jacobs Chuck Attachment 

5 

/32” Jacobs Chuck Key........................................................................... 5044-999-53 


1/Box 

For use with 5 /32” Jacobs Chuck Attachment 

Universal Hose, 10’ (3.05m) ........................................................................ 5052-010 

For Micro100 Handpieces, Series 4 ® Handpieces, Sternum Saw Handpiece, 

UltraPower ® Foot Control, Osteon Foot Control and Ototome Foot Control 


For Micro100 Handpiece, Series 4 Handpiece, Sternum Saw Handpiece, 

Osteon Foot Control and Ototome Foot Control 


For Micro100 Handpiece, Series 4 Handpiece, Sternum Saw Handpiece, 

Osteon Foot Control and Ototome Foot Control 

Extension Hose, 10’ (3.05m) ....................................................................... 5052-018 

Male Connector: Schrader 

Female Connector: Schrader 


Male Connector: DISS 







Female Connector: Schrader



Cat. No. 

20’ Hose............................................................................................................. A101 

For use with Minos, Mini-Driver, Micro-Driver and Staplizer ® Handpieces 

Mini-Driver/Micro-Driver Air Hose, 10’ .......................................................... A201 

For use with U100 Micro-Driver Handpiece, 

K200 Mini-Driver Handpiece, Staplizer 

and Minos Handpieces 

Hose Handler .............................................................................................. 5052-101 

Velcro 

Clip: Stainless Steel 

5/Box 

Male Stryker to Female Schrader Adapter.......................................................... M321 


DISS to Schrader Adapter .................................................................................. M322 


Pressure Tester............................................................................................. 2075-017



Cat. No. 

Nitrogen Regulator, Single Outlet...................................................................... M207 

Replaces 1375-007 

Nitrogen Regulator, Dual Outlet........................................................................ M208 

Replaces 1375-030 

Schrader Coupler......................................................................................... 5144-002 

Connection: Female Schrader 

Y Connector .................................................................................................1375-040 

Connection: Male Schrader 

Dual Female Connection: Schrader 

Cleaning Brush ............................................................................................ 5053-124 

1/Box



Cat. No. 

Autoclave Container.................................................................................... 5030-010 

Half Size 

Anodized Aluminum 

Dimensions: 11 x 12 x 6” (27.94 x 30.48 x 15.24cm) 

Basket, Half Size .......................................................................................... 5030-011 



Autoclave Container.................................................................................... 5030-020 

Mid-Length 

Anodized Aluminum 


Basket, Mid-Length ..................................................................................... 5030-021 



Blue I.D. Labels............................................................................................ 5030-031 

Description: Hall ® Surgical 

For use with 5030-010 and 5030-020



Cat. No. 

Autoclave Case, Large ................................................................................. 1384-042 


Dimensions: 12.2 x 10.2 x 4.06” (30.99 x 25.91 x 10.31cm) 

Autoclave Case, Standard............................................................................ 5052-012 



Universal Autoclave Case .................................................................................... E306 

Aluminum 


Disposable Filter .......................................................................................... 5037-033 

1000/Box 

For use with 5030-010 and 5030-020



Cat. No. 

Holding Clamp, Small .................................................................................. 5030-028 

Holding Clamp, Medium ............................................................................. 5030-029 

Holding Clamp, Large.................................................................................. 5030-030 

For use with 5030-010 and 5030-020 

Sterile Container Accessory Kit .................................................................... 5030-040 

Includes: 

5030-025 25 Sterile Processing Cards 

5030-026 50 Tamper Evident Arrows 

5037-033 50 Disposable Filters 


Sterile Processing Cards ............................................................................... 5030-025 

500/Box 


Tamper Evident Arrows................................................................................ 5030-026 

500/Box 


Bur, Blade Cabinet ....................................................................................... 5052-400 

Labels for Bur, Blade Cabinet ................................................................ 22173470000 

Console Stand ............................................................................................. 5020-054

Large Hub Shaver Blades 

The ultimate blade for aggressive soft tissue resection, 

including removal of the ACL stump. 

Ideal for procedures such as subacromial decompression, 

acromioplasty and any other procedure where soft tissue 

and/or bone cutting is desired. 

Excellent for all general debridement applications. 

Products not shown at actual size. 

For use with the following handpieces: 

C9820, C9824, C9828, C9964, 9962, 9932, 9950F, MC9820, MC9828, 

D9820 and D9824 

Great White ® Blade 


Cat. No. 

3.5mm, Large Hub, Sterling, Great White, 

6,000rpm max., 14.5cm, Working Length, 6/Box ........................................ 9399A 

4.2mm, Large Hub, Sterling ® , Shaver, Great White, 

6,000rpm max., 13.0cm Working Length, 6/Box ......................................... 9299A 

4.2mm, Large Hub, Merlin ® , Shaver, Great White 

Pre-Bent 15° max, 6,000rpm max., 

13.0cm Working Length, 6/Box ................................................................. C9299P 

4.8mm, Large Hub, Sterling, Great White, 

6,000rpm max., 13.0cm, Working Length, 6/Box ........................................ 9297A 

Mako Blade 

4.2mm, Large Hub, Sterling, Shaver, Mako, 


5.5mm, Large Hub, Sterling, Shaver, Mako, 

6,000rpm max., 13.0cm Working Length, 6/Box ....................................... C9298A 

Ultracut ® Blade 

4.2mm, Large Hub, Sterling, Shaver, UltraCut, 

6,000rpm max., 13.0cm Working Length, 6/Box ......................................... C9405 

5.5mm, Large Hub, Sterling, Shaver, UltraCut, 

6,000rpm max., 13.0cm Working Length, 6/Box ......................................... C9415


C9820, C9824, C9828, C9964, 9962, 9932, 9950F, MC9820, MC9828, 

D9820 and D9824 

Full-Radius Resector 



Cat. No. 

3.5mm, Large Hub, Sterling ® , Shaver, Full-Radius Resector, 


3.7mm, Large Hub, Merlin ® , Shaver, Full-Radius Resector, 

Bendable 30° max., 6,000rpm max., 

13.0cm Working Length, 6/Box.................................................................... P9375 

4.2mm, Large Hub, Sterling, Shaver, Full-Radius Resector, 


4.2mm, Large Hub, Merlin, Shaver, Full-Radius Resector, 




Pre-bent 15°, 6,000rpm max., 

13.0cm Working Length, 6/Box ................................................................... C9241 








Gator ® Blade 

3.5mm, Large Hub, Sterling, Shaver, Gator, 


3.7mm, Large Hub, Merlin, Shaver, Gator, 









Pre-bent 15°, 6,000rpm max., 










Ideal for aggressive meniscal trimming, joint debridement, 

plica and synovium removal, and bone resection. 

Products not shown at actual size.


All purpose aggressive blade. Ideal for extensive tissue removal. 

Useful for all general debridement applications. 



C9820, C9824, C9828, C9964, 9962, 9932, 9950F, MC9820, MC9828, 

D9820 and D9824 

Cuda ® Blade 


Cat. No. 

3.5mm, Large Hub, Sterling ® , Shaver, Cuda, 


3.7mm, Large Hub, Merlin ® , Shaver, Cuda, 



4.2mm, Large Hub, Sterling, Shaver, Cuda, 


4.2mm, Large Hub, Merlin, Shaver, Cuda, 

Extended Length, 6,000rpm max., 

19.0cm Working Length, 6/Box .................................................................. EL9356 


Bendable 30° max., 6,000 rpm max., 



Pre-bent 15° max., 6,000rpm max., 









End Cutter 

3.5mm, Large Hub, Sterling, Shaver, End Cutter, 


4.2mm, Large Hub, Sterling, Shaver, End Cutter, 

6,000rpm max., 13.0cm Working Length, 6/Box ......................................... C9284


C9820, C9824, C9828, C9964, 9962, 9932, 9950F, MC9820, MC9828, 

D9820 and D9824 

Dragon ® End Cutter 



Cat No. 

3.5mm, Large Hub, Sterling ® , Shaver, Dragon End Cutter, 


4.2mm, Large Hub, Sterling, Shaver, Dragon End Cutter, 


5.5mm, Large Hub, Sterling, Shaver, Dragon End Cutter, 


Meniscus Cutter 

3.5mm, Large Hub, Sterling, Shaver, Meniscus Cutter, 






Slotted Whisker 

4.2mm, Large Hub, Sterling, Shaver, Slotted Whisker, 


5.5mm, Large Hub, Sterling, Shaver, Slotted Whisker, 


A multi-purpose blade that’s ideal for tough tissue resections 

like meniscus tears. 

Useful for all meniscal trimming and joint debridement of the 

patella and trochlea chondromalacia. 

Non-aggressive, for debridement of the fine synovium, fatty 

tissue and articulating surfaces. 


Large Hub Burs 

and Routers 

With 

Reduced 

Hood 

Useful for bony site preparation, cartilage and osteochondral 

debridement and osteophyte resection. 

With 

Reduced 

Hood 

Excellent for shaping and resecting bone and cartilage during 

acromioplasty and notchplasty. 

With 

Reduced 

Hood 

Ideal for resecting bone and cartilage during acromioplasty 

and notchplasty. 



C9820, C9824, C9828, C9964, 9962, 9932, 9950F, MC9820, MC9828, 

D9820 and D9824 

Spherical Bur 

Cat. No. 

3.5mm, Large Hub, Sterling ® , Bur, Spherical, 

10,000rpm max., 13.0cm Working Length, 6/Box, ...................................... H9110 

(Replaces C9110) 

4.5mm, Large Hub, Sterling, Bur, Spherical, 







10,000rpm max., 20° Reduced Hood, 

13.0cm Working Length, 6/Box .............................................................. H9112RH 

(Replaces H9113) 

Tapered Bur 

4.0mm, Large Hub, Sterling, Bur, Tapered, 




10,000rpm max., 20º Reduced Hood, 

13.0cm Working Length, 6/Box, ............................................................. H9121RH 




Oval Bur 

4.0mm, Large Hub, Sterling, Bur, Oval, 




10,000rpm max., 20º Reduced Hood 

13.0cm Working Length, 6/Box, ............................................................. H9101RH 


Extended Length, 3,500rpm max., 

19.0cm Working Length, 6/Box .................................................................. EL9101 





Left Helix, 10,000rpm max., Special Order Only 

13.0cm Working Length, 6/Box ................................................................... H9135 


High speed bur operates at 10,000rpm with D9820 and D9824 shaver handpiecs. 



C9820, C9824, C9828, C9964, 9962, 9932, 9950F, MC9820, MC9828, 

D9820 and D9824 

Cyclone ® Bur 

Large Hub Burs 

and Routers 


Cat. No. 

4.5mm, Large Hub, Sterling ® , Bur, Cyclone, 

10,000rpm max., 13.0cm Working Length, 6/Box ....................................... H9118 

(Replaces H9117) 

5.5mm, Large Hub, Sterling, Bur, Cyclone, 


Vortex ® Router - Five Flutes 

4.5mm, Large Hub, Sterling, Router, Vortex, 

Hooded, 10,000rpm max., 

13.0cm Working Length, 6/Box, .................................................................. H9131 



Unhooded, 10,000rpm max., 

13.0cm Working Length, 6/Box, .................................................................. H9134 



Hooded, 10,000rpm max., 

13.0cm Working Length, 6/Box ................................................................... H9132 

Lighnting ® 

4.5mm, large Hub, Sterling, Lighting, 


Bur Sheaths 

5.5 or 6.0mm Bur sheath, Large Hub, Sterling, 

for use with Inner Assembly of 5.5mm or 6.0mm burs with 13cm 

working length to create unhooded bur ....................................................... H9000 

4.0 or 4.5mm Bur sheath, Large Hub, Sterling, 

for use with Inner Assembly of 4.0mm or 4.5mm burs with 13cm 

working length to create unhooded bur ....................................................... H9002 

High speed bur operates at 10,000rpm with D9820 and D9824 shaver handpiecs. 

Useful for aggressive bony site preparation, cartilage and 

osteochondral debridement, and osteophyte resection. Six 

cutting flutes. 

Ultra-aggressive. Ideal for extensive bone and cartilage 

removal in the subacromial space. Five cutting flutes. 


acromioplasty and any other procedure where both soft tissue 

and bone cutting is desired. 


Bur and Sheath 

Purchased Separately

Micro Hub Blades 

The ultimate blade for aggressive soft tissue resection, 

including removal of the ACL stump. 


acromioplasty and any other procedure where soft tissue 

and/or bone cutting is desired. 



C9840 and MC9840 

Great White ® Blade 


Cat. No. 

4.2mm, Micro Hub, Sterling ® , Shaver, Great White, 

6,000rpm max., 13.0cm Working Length, 6/Box ...................................... M9299A 

Mako Blade 

4.2mm, Micro Hub, Sterling, Shaver, Mako, 

6,000rpm max., 13.0cm Working Length, 6/Box ...................................... M9298A


C9840 and MC9840 

Full-Radius Resector 



Cat. No. 

2.0mm, Micro Hub, Sterling ® , Blade, Full-Radius Resector, 

5,000rpm max., 7.6cm Working Length, 6/Box ........................................... C9940 

2.9mm, Micro Hub, Sterling, Blade, Full-Radius Resector, 





5,000rpm max., 13.0cm Working Length, 6/Box ...................................... MC9248 



4.2mm, Micro Hub, Merlin ® , Blade, Full-Radius Resector, 

Pre-Bent 15°, 5,000 rpm max., 13.0cm Working Length, 6/Box................ MP9249 

4.2mm, Micro Hub, Merlin, Blade, Full-Radius Resector, 

Bendable 30°max., 5,000rpm max., 

13.0cm Working Length, 6/Box ................................................................ MP9376 





Gator ® Blade 

2.0mm, Micro Hub, Sterling, Blade, Gator, 










4.2mm, Micro Hub, Merlin, Blade, Gator, 

Pre-Bent 15°, 5,000rpm max., 


4.2mm, Micro Hub, Merlin, Blade, Gator, 

Bendable 30°max., 5,000rpm max., 







Ideal for aggressive removal of synovium, soft tissue, 

cartilage and plica. 



All-purpose aggressive blade. Ideal for extensive tissue removal. 

A multi-purpose blade that’s ideal for tough tissue resections 

like meniscus tears. 

Non-aggressive, for debridement of the fine synovium, 

fatty tissue and articulating surfaces. 



C9840 and MC9840 

Cuda ® Blade 


Cat. No. 

2.0mm, Micro Hub, Sterling ® , Blade, Cuda, 


2.9mm, Micro Hub, Sterling, Blade, Cuda, 





5,000 rpm max., 13.0cm Working Length, 6/Box ..................................... MC9253 



4.2mm, Micro Hub, Merlin ® , Blade, Cuda, 

Pre-Bent 15°, 5,000 rpm max., 13.0cm Working Length, 6/Box................ MP9259 

4.2mm, Micro Hub, Merlin, Blade, Cuda, 

Bendable 30°max., 5,000 rpm max., 13.0cm Working Length, 6/Box ....... MP9356 





Dragon ® End Cutter 

3.5mm, Micro Hub, Sterling, Blade, Dragon, End Cutter, 






Slotted Whisker 

2.9mm, Micro Hub, Sterling, Blade, Slotted Whisker, 


4.2mm, Micro Hub, Sterling, Blade, Slotted Whisker, 


Micro Cannula Adapter 

Micro Hub, Blade, Cannula Adapter, Single use, Sterile, 

20/Box Allows for Watertight Seal Between 

Micro Hub Blades and Most Cannulas....................................................... MC1000


C9840 and MC9840 

Spherical Bur 

Micro Hub Burs 

and Routers 


Cat. No. 

2.9mm, Micro Hub, Sterling ® , Bur, Spherical, 


3.5mm, Micro Hub, Sterling, Bur, Spherical, 



5,000rpm max., 13.0cm Working Length, 6/Box...................................... MH9111 



Oval Bur 

6.0mm, Micro Hub, Sterling, Bur, Oval, 


6.0mm, Micro Hub, Sterling, Bur, Oval, 

Left Helix, 5,000rpm max., 13.0cm Working Length, 6/Box ..................... MC9106 

Vortex ® Router - Two Flutes 

2.9mm, Micro Hub, Sterling, Router, Vortex, 

Hooded, 5,000rpm max., 7.6cm Working Length, 6/Box ............................. C9990 


Hooded, 5,000rpm max., 7.6cm Working Length, 6/Box ............................. C9991 


Hooded, 5,000rpm max., 13.0cm Working Length, 6/Box ....................... MH9131 


Hooded, 5,000rpm max., 13.0cm Working Length, 6/Box ....................... MH9132 

Useful for bony site preparation, cartilage and osteochondral 

debridement, and osteophyte resection. 

Ideal for resecting bone and cartilage during acromioplasty 

and notchplasty. 

Ultra-aggressive. Ideal for extensive bone and cartilage 

removal. Two cutting flutes. 


Micro Burs 

Special Order Only 

Special Order Only 

Products shown at actual size. 

For use with: 

MicroChoice ® High Speed Drill (5020-025) 

MicroChoice Medium Speed Drill (5020-021) 

Micro100 Drill (5053-009) 

Micro E ® Drill (5040-001) 

Surgitome E ® (5040-008) 

Surgairtome Two ® (5058-001) 


Cat. No. 

Micro Bur, Side-Cutting, Straight, Medium, 6 Flutes, ................................... 5091-201 

1.0 x 5.0mm, Carbide 




1.5x 7.5mm, Carbide 

Micro Bur, Side-Cutting, Tapered, Medium, 6 Flutes,................................... 5091-206 


Micro Bur, Side-Cutting, Lindemann, Medium, 4 Flutes,.............................. 5091-212 


Micro Bur, Tapered, Fissure, Medium, 1.2 x 2.3, #701 Carbide ................. 5091-271* 

Micro Bur, Tapered, Fissure, Medium, 1.6 x 3.8mm, #702 Carbide .......... 5091-272* 

Micro Bur, Tapered, Fissure, Medium, 2.1 x 4.9mm, #703, Carbide ............ 5091-213 

Micro Bur, Tapered, Fissure, Medium, 2.1 x 4.9mm, #703, Carbide ............ 5091-113 










1.6 x 4.3mm, Carbide, 

Micro Bur, Side-Cutting, Rounded End, Medium, 6 Flutes, .......................... 5091-219 

1.2 x 3.7mm, Carbide, 

Micro Bur, Round, Medium, 8 Flutes, 1.8mm, Carbide ................................ 5091-221 







Micro Bur, Round, Medium, 10 Flutes, 5.0mm, Carbide .............................. 5091-230 

Micro Bur, Round, Medium, 10 Flutes, 6.5mm, Carbide .............................. 5091-232 

Medium Burs are used with: 

MicroChoice ® Micro100/Surgairtome Two ® / 

Surgitome E ® 

Medium Bur Guard Medium Bur Guard 

5020-060 1375-012 

5091-1XX = single pack, sterile 

5091-2XX = 5 per box, sterile 

*Not CE marked, may require additional delivery time

Micro Burs 


Cat. No. 

Micro Bur, Oval, Medium, 8 Flutes, 4.0 x 8.0mm, Carbide .......................... 5091-236 

Micro Bur, Oval, Medium, 8 Flutes, 5.5 x 10.0mm, Carbide ........................ 5091-238 

Micro Bur, Wire Pass, Medium, 2 Flutes, 1.0 x 19.0mm, Steel ..................... 5091-247 

Micro Bur, Wire Pass, Medium, 2 Flutes 1.5 x 19.0mm, Steel ...................... 5091-248 

Micro Bur, Wire Pass, Medium, 2 Flutes, 2.0 x 19.0mm, Steel ..................... 5091-249 

Micro Bur, Barrel, Medium, 6 Flutes 2.0 x 10.0mm, Carbide........................ 5091-252 

Micro Bur, Barrel, Medium, 6 Flutes, 4.0 x 10.0mm, Carbide....................... 5091-254 

Micro Bur, Round, Diamond, Medium, 140-170 Grit, 2.0mm...................... 5091-260 



Micro Bur, Oval, Diamond, Medium, 140-170 Grit, 4.0 x 8.0mm................ 5091-270 

Medium Burs are used with: 

MicroChoice ® Micro100/Surgairtome Two ® / 

Surgitome E ® 

Medium Bur Guard Medium Bur Guard 

5020-060 1375-012 



Products shown at actual size.


Blades and Drills for 

Patellar Tendon Graft 

Guide System 

For use with: 

Linvatec Patellar Tendon Graft Guide System 


Cat. No. 

Saw Blade, Hall ® , ACL/PCL, 8.0mm Depth Stop when ..................................... 8703■ 

used with Patellar Tendon Graft Guides 

(Used with Micro100 and Micro E ® Sagittal Saws) 

0.37 x 1.72 x 0.015 x 0.53 x 0.28” (9.4 x 43.7 x 0.38 x 13.6 x 0.7mm) 

Saw Blade, Stryker, ACL/PCL, 8.0mm Depth Stop when .................................. 8704■ 


(Used with Original Stryker Command System Only) 

0.26 x 1.46 x 0.015 x 0.51 x 0.28” (6.6 x 37.1 x 0.38 x 13.0 x 0.7mm) 

Saw Blade, ACL/PCL, 8.0mm Depth Stop when used ...................................... 8706■ 

with Patellar Tendon Graft Guides 

(Used with Mini-Driver K120 Attachment Only) 

0.38 x 1.81 x 0.015 x 0.51 x 0.28” (9.7 x 4.6 x 0.38 x 13.0 x 0.7mm) 

Saw Blade, ACL/PCL, 8.0mm Depth Stop when ............................................ C8902◆ 


(Used with Series 3, Series 4 and Versipower Oscillating Saws 

and Micro 100 and Micro E Sagittal Saws) 

0.37 x 1.62 x 0.015 x 0.47 x 0.23” (9.4 x 41.2 x 0.38 x 12.0 x 0.6mm) 

Saw Blade, ACL/PCL, 8.0mm Depth Stop when ............................................ C8904◆ 


(Used with MicroChoice ® Sagittal Saw, Micro100 

and Micro E Sagittal Saws) 

0.37 x 1.61 x 0.015 x 0.47 x 0.23”(9.4 x 40.9 x 0.38 x 12.0 x 0.6mm) 

Saw Blade, Stryker, ACL/PCL, 8.0mm Depth Stop when................................ C8905◆ 


(Used with Stryker 2000 Sagittal Saw) 

0.37 x 1.96 x 0.015 x 0.47 x 0.23” (9.4 x 49.8 x 0.38 x 12.0 x 0.6mm) 

Screw, Drill Set, ACL/PCL, Non-Sterile, ............................................................... 8730 

3/32 x 2-1/2” (2.4 x 63.5mm) and 

3/32 x 3-1/2” (2.4 x 88.9mm), 

(Used in conjunction with Patellar Tendon Graft Guide System) 

Twist Drill, ACL/PCL, Non-Sterile,....................................................................... 8733 

2.0 x 127.0mm (.079 x 5.0”), 

(Used in conjunction with GraFix ® Graft Preparation System and 

Paramax ® Bone Block Drill Guide) 

Dimensions are: blade width x overall length x blade thickness x 

maximum cutting depth and cut thickness. 

■ = available in single, sterile 

◆ = available in box of 5, sterile

Saw Blades - Freehand 



Cat. No. 

Saw Blade, Freehand, ACL/PCL, 

8.0mm Depth Stop, 5/Box, Sterile,............................................................... C8802 

(Used with Versipower ® , Versipower ® Plus, 

Series 3 ® and Series 4 ® Oscillating Saws) 

0.37 x 2.25 x 0.015 x 0.32 x 0.23” (9.4 x 51.2 x 0.38 x 8.0 x 0.6mm) 



(Used with Micro 100, Micro E ® Sagittal Saws, 

Versipower, Series 3 and Series 4 Oscillating Saws) 

0.37 x 1.62 x 0.015 x 0.32 x 0.23” (9.4 x 41.2 x 0.38 x 8.0 x 0.6mm) 

Mini-Driver, Blade, Sagittal, Fine, ..................................................................... K157■ 

9.5 x 5.0 x 0.38mm (0.015”) and 8.0mm (.315”) 



(Used with MicroChoice ® , Micro 100 and Micro E Sagittal Saws) 

0.37 x 1.61 x 0.015 x 0.32 x 0.23” (9.4 x 40.9 x 0.38 x 8.0 x 0.6mm) 


10.0mm Depth Stop, 5/Box, Sterile,............................................................. C8806 

(Used with MicroChoice ® , Micro 100 and Micro E Sagittal Saws) 

0.37 x 1.61 x 0.015 x 0.39 x 0.23” (9.4 x 40.9 x 0.38 x 10.0 x 0.6mm) 



(Used with Stryker 2000 Sagittal Saw) 

0.37 x 1.96 x 0.015 x 0.32 x 0.23” (9.4 x 49.8 x 0.38 x 8.0 x 0.6mm) 

Dimensions are: blade width x overall length x blade thickness x 

maximum cutting depth and cut thickness. 

■ = available only as single pack, sterile 

HALL ®

Graft Harvesting Blades 


Graft Harvesting 

and Preparation 

20 

10 

16.5mm Blade Width 

5mm 

6mm 

7mm 

8mm 

9mm 

10mm 

11mm 

12mm 

13mm 

For use with: 

PowerPro ® (PRO2300E, PRO6125 and PRO5300) 

Versipower ® (5048-002) 

Versipower ® Plus (5071-002) 

Series 3 ® (5044-002) 

Series 4 ® (5067-002) 


Cat. No. 

Large Bone, Hall ® Blade, Graft Harvesting, 5.0mm, .................................. 5071-105■ 

20.0mm Maximum Cutting Depth, 

0.4mm (0.016”) Material Thickness, 1/box 

Large Bone, Hall Blade, Graft Harvesting, 6.0mm, ................................... 5071-106■ 












Large Bone, Hall Blade, Graft Harvesting, 10.0mm, ................................. 5071-110■ 












■ = available only as single pack, sterile

For use with: 

PowerPro ® (PRO2300E, PRO6125 and PRO5300) 


Versipower ® Plus (5071-002) 

Series 3 ® (5044-002) 

Series 4 ® (5067-002) 

ACL Blades 


Cat. No. 

Large Bone, Hall ® Blade, Graft ACL, ......................................................... 5071-127■ 

8.5 x 38.0 x 0.4mm (0.016”) and Cut Thickness 0.8mm (0.031”) 

Large Bone, Hall Blade, Graft ACL, ............................................................. 5071-232 








Dimensions are: blade width x maximum cutting depth x blade thickness 

and cut thickness. 




40 

40 

30 


30 

30 

20 

20 

20 

10 

10 

10

40 

40 

30 

ACL Blades 

30 

30 

20 


20 

20 

10 

10 

10 

For use with: 


Series 3 ® (5044-002) 

Series 4 ® (5067-002) 

Micro100 Sagittal Saw (5053-011) 

Micro E ® Sagittal Saw (5040-002) 


Cat. No. 

Large Bone, Hall ® Blade, Graft Oscillating, ............................................... 1384-177■ 

8.5 x 38.0 x 0.4mm (0.016”) and Cut Thickness 0.8mm (0.031”), 

1/box 

Large Bone, Hall Blade, Graft Oscillating, ................................................. 5059-282◆ 


5/box 



5/box 



5/box 



5/box 



◆ = available only as box of 5, sterile 


Tunnel Preparation 

and Graft Passage 



Cat. No. 

2 - Pin Passer, Drill Tip, ACL, ............................................................................ C8623 

15.5” (39.4cm), Tip Diameter .172” (4.4mm), 

(Used in Conjunction with Pinn•ACL ® Cruciate Guide System) 

2 - Pin Passer, Trocar Tip, ACL,............................................................................ 8623 

15.5” (39.4cm), Tip Diameter .172” (4.4mm), 

(Used in conjunction with Pinn•ACL Cruciate Guide System) 

Guide Pin, Graft Passing, ACL/PCL,.................................................................. C8675 

17.0” (43.2cm), 3/32” (2.4mm) Dia., 


Pins, Hewson Break-Away, ACL/PCL, ................................................................. 9743 

9.0” (22.9cm), 3/32” (2.4mm) Dia., 5/Box, 


Guide Pin, High-Strength, ACL/PCL, .................................................................. 9742 

9.0” (22.9cm), 3/32” (2.4mm) Dia., 5/Box, 


Guide Pin, High-Strength, ACL/PCL, .................................................................. 9744 

14.0” (35.6cm), 3/32” (2.4mm) Dia., 5/Box, 

(For use with Bullseye ® Femoral Guides) 


Drill Bit, Badger ® , ACL/PCL,.............................................................................. C8582 

7.0mm Dia. x 22.9cm (9.0”), 4/Box, Sterile 

Drill Bit, Badger, ACL/PCL,.................................................................................. 8593 


Drill Bit, Badger, ACL/PCL, ............................................................................... C8599 


















Drill Bit, C - Reamer, ACL/PCL, Long Head, .................................................... 8786 


Drill Bit, C - Reamer, ACL/PCL, Long Head,........................................................ 8787 


Drill Bit, C - Reamer, ACL/PCL, Long Head,........................................................ 8788 


Drill Bit, C - Reamer, ACL/PCL, Long Head, ..................................................... 8772A 


Drill Bit, C - Reamer, ACL/PCL, Long Head, ..................................................... 8773A 

10.0mm Dia. x 17.8cm (7.0”), 4/Box, Sterile


Tunnel Preparation 

and Graft Passage 

50 

50 

50 

50 

50 

40 

40 

40 

40 

40 

30 

30 

30 

30 

30 

20 

20 

20 

20 

20 

10 

10 

10 

10 

10 


Cat. No. 

Drill Bit, C - Reamer, ACL/PCL, Short Head, ................................................. 8774A 


Drill Bit, C - Reamer, ACL/PCL, Short Head, ..................................................... 8775A 


Drill Bit, Reamer, ACL/PCL, 5.0mm, 4/Box, Sterile, ........................................ DB8705 

Fits Zimmer Collets 









Drill Bit, Reamer, ACL/PCL, 10.0mm, 4/Box, Sterile, ...................................... DB8710 






Coring Reamer/Bushing, ACL/PCL, 7.0mm, 4/Box, Sterile ............................. CR8847 



Coring Reamer/Bushing, ACL/PCL, 10.0mm, 4/Box, Sterile ........................... CR8850 

Coring Reamer/Bushing, ACL/PCL, 11.0mm, 4/Box, Sterile ........................... CR8851 

Coring Reamer, Plunger, ACL/PCL, Non-Sterile .............................................. CR8900 

Coring Reamer, Adapter, ACL/PCL, Non-Sterile ............................................. CR8901 

Fits Zimmer Attachments 

Coring Reamer, Wrench, ACL/PCL, Non-Sterile ............................................. CR8902

Graft Fixation 



Cat. No. 

Twist Drill, ACL/PCL, 3.2mm, Non-Sterile........................................................... 8604 

For use with the Soft Tissue Anchoring Set 

Twist Drill, ACL/PCL, 4.2mm, Non-Sterile........................................................... 8605 

For use with the Soft Tissue Anchoring Set


Micro Sagittal Saw Blades 

For use with: 

MicroChoice ® Sagittal Saw (5020-022) 



Flat Blades 


Cat. No. 

Micro Blade, Sagittal, Fine, Radial, 9.5 x 25.5 x 0.4mm, .............................. 5023-218 

Stainless Steel, 

Micro Blade, Sagittal, Coarse, Flat, 19.5 x 25.5 x 0.4mm,............................ 5023-230 




Micro Blade, Sagittal, Coarse, Flat, 5.5 x 25.5 x 0.4mm,.............................. 5023-232 






Micro Blade, Sagittal, Coarse, Flat, 9.5 x 25.5 x 0.4mm,.............................. 5023-243 


Micro Blade, Sagittal, Fine, Flat, 9.5 x 25.5 x 0.4mm, .................................. 5023-238 


Micro Blade, Sagittal, Coarse, Flat, 4.0 x 6.0 x 0.4mm, ............................. 5023-244◆ 




◆ = available only as box of 5, sterile



Cat. No. 

Micro Blade, Sagittal, Coarse, Flat, 10.0 x 18.50 x 0.4mm, ....................... 5023-364◆ 


Micro, Blade, Sagittal, Fine, Flat, 4.5 x 25.5 x 0.4mm, ..................................5023-239 








Micro Blade, Sagittal, Fine, Flat, 5.5 x 18.5 x .4mm, .................................... 5023-144 


Abraders 

Micro Blade, Abrader, Tip Diamond Coated, ............................................. 5023-055● 

25.0 x 6.3 x 3.8mm, Straight, Stainless Steel, 

Micro Blade, 25° Angled, Abrader, Tip Diamond Coated,.......................... 5023-056● 

25.0 x 6.3 x 3.8mm, Medial, Stainless Steel, 

Micro Blade, 70° Angled, Abrader, Tip Diamond Coated,.......................... 5023-057● 

25.0 x 6.3 x 3.8mm, Lateral, Stainless Steel, 

Micro Blade, Sagittal, Fine, Flat, 10 x 18.5 x .4mm ................................... 5044-145◆ 



● = available only as single pack, non-sterile 





Angled Blades 


Cat. No. 

Micro Blade, 70˚ Angled, 9.5 x 7.5 x 0.6mm,............................................... 5023-228 

Radial, Stainless Steel, 

Micro Blade, 70˚ Angled, 9.5 x 13.5 x 0.6mm,............................................. 5023-229 

Radial, Stainless Steel, 

Micro Blade, 90˚ Angled, Coarse, 5.5 x 9.0 x 0.6mm, .................................. 5023-234 


Micro Blade, 45˚ Angled, Coarse, 5.5 x 18.0 x 0.6mm, ................................ 5023-235 


Micro Blade, 90˚ Angled, Coarse, 14.0 x 15.5 x 0.6mm, .............................. 5023-236 



5023-2XX = 5 per box, sterile

Small Bone ACL Blades used with: 






Cat. No. 

Micro Blade, Small Bone ACL, 8.5 x 38.0 x 0.4mm ................................... 5023-186■ 

and Cutting Thickness 0.74mm, Stainless Steel, 

Micro Blade, Small Bone ACL, 19.0 x 41.0 x 0.4mm ................................. 5023-282◆ 


Micro Blade, Small Bone ACL, 9.5 x 25.5 x 0.4mm ................................... 5023-283◆ 











Graft Harvesting Blades 



16.5mm Blade Width 

5mm 

6mm 

7mm 

8mm 

9mm 

10mm 

11mm 

12mm 

13mm 

For use with: 





Cat. No. 

Micro Blade, Graft Harvesting, 5.0mm, .................................................... 5023-405■ 

20.0mm Maximum Cutting Depth, 0.4mm 

(0.016”) Material Thickness, Stainless Steel, 

Micro Blade, Graft Harvesting, 6.0mm,..................................................... 5023-406■ 



Micro Blade, Graft Harvesting, 7.0mm, .................................................... 5023-407■ 









Micro Blade, Graft Harvesting, 10.0mm,................................................... 5023-410■ 













For use with: 



Flat Blades 



Cat. No. 

Micro100/Micro E (Only), Blade, Sagittal, 9.5 x 25.5 x 0.4mm................. 5053-018● 

and Cut Thickness 0.6mm 

Micro100/E (Only), Blade, Sagittal, 19.5 x 25.5 x 0.4mm......................... 5053-030● 




Micro100/E (Only), Blade, Sagittal, 5.5 x 25.5 x 0.4mm........................... 5053-032● 


Micro100/E (Only), Blade, Sagittal, 14.0 x 41.0 x 0.4mm ........................ 5053-033● 




Micro100/E (Only), Blade, Sagittal, Fine, 9.5 x 25.5 x 0.4mm .................. 5053-038● 









Cat. No. 

Micro100 /Micro E ® (Only), Blade, Sagittal, Fine,..................................... 5053-040● 

9.5 x 41.0 x 0.4mm and Cut Thickness 0.6mm 





Angled Blades 

Micro100/E (Only), Blade, Sagittal, 70° Angled, Fine,............................... 5053-028● 

9.5 x 7.5 x 0.6mm 


9.5 x 13.5 x 0.6mm 


5.5 x 9.0 x 0.6mm 


5.5 x 18.0 x 0.6mm 


14.0 x 15.5 x 0.6mm 

● = available only as single pack, non-sterile

For use with: 

Mini-Driver Sagittal Saw Attachment (K120) 

Can Only be use with K100 or K200 Handpiece 



Cat. No. 


6.4 x 15.1 x 0.71mm (0.028”) and 0.89mm (0.035”) 


6.4 x 31.0 x 0.71mm (0.028”) and 0.89mm (0.035”) 


10.4 x 15.1 x 0.71mm (0.028”) and 0.89mm (0.035”) 


10.4 x 31.0 x 0.71mm (0.028”) and 0.89mm (0.035”) 


16.5 x 15.1 x 0.71mm (0.028”) and 0.89mm (0.035”) 


6.4 x 15.1 x 0.38mm (0.015”) and 0.56mm (0.022”) 


6.4 x 31.0 x 0.38mm (0.015”) and 0.56mm (0.022”) 

Mini-Driver, Blade, Sagittal, Fine, ................................................................. K133■ 

10.4 x 15.1 x 0.38mm (0.015”) and 0.56mm (0.022”) 


10.4 x 31.0 x 0.38mm (0.015”) and 0.56mm (0.022”) 


16.5 x 15.1 x 0.38mm (0.015”) and 0.56mm (0.022”) 


8.0 x 25.0 x 0.38mm (0.015”) and 0.64mm (0.025”) 



■ = available only as single pack, sterile Products shown at actual size. 

25 mm 

10 mm 

10 

mm 

10 

mm 

25 mm 

10 mm 

25 

mm 

10 mm 

25 mm 

10 

mm 

20 mm 

5 

20 mm 

mm 

mm 

5 

5 

mm 

20 mm 

5 

mm 

20 

mm 

5 

mm 

20 mm 

5 

mm 

15 mm 

15 mm 

15 mm 

15 

mm 

15 mm 

10 mm 

10mm 

10 mm 

10 

mm 

10 mm 

5 

mm 

5 mm 

5 

mm 

5 

mm 

5 

mm


25 

mm 

40 

mm 

25 

mm 

10 

mm 

10 

mm 

25 

mm 

40 

mm 

10 

mm 

25 

mm 

20 

mm 

35 

mm 

20 

mm 

35 

mm 

5 

mm 

5 

mm 

20 

mm 

5 

mm 


20 

mm 

15 

mm 

30 

mm 

15 

mm 

30 

mm 

15 

mm 

15 

mm 

10 

mm 

25 

mm 

10 

mm 

25 

mm 

10 

mm 

10 

mm 

5 

mm 

20 

mm 

5 

mm 

20 

mm 

5 

mm 

5 

mm 

15 

mm 

15 

mm 

10 

mm 

10 

mm 

5 

mm 

5 

mm 

For use with: 

Mini-Driver Sagittal Saw Attachment (K220) 


Cat. No. 


6.4 x 14.2 x 0.71mm (0.028”) and 0.97mm (0.038”) 


6.4 x 30.0 x 0.71mm (0.028”) and 0.97mm (0.038”) 


10.2 x 14.2 x 0.71mm (0.028”) and 0.97mm (0.038”) 


10.2 x 30.0 x 0.71mm (0.028”) and 0.97mm (0.038”) 


15.5 x 14.2 x 0.71mm (0.028”) and 0.97mm (0.038”) 


19.1 x 27.4 x 0.38mm (0.015”) and 0.65mm (0.026”) 


14.0 x 27.4 x 0.38mm (0.015”) and 0.65mm (0.026”) 


9.5 x 27.4 x 0.38mm (0.015”) and 0.65mm (0.026”) 


19.1 x 42.7 x 0.38mm (0.015”) and 0.65mm (0.026”) 





Cat. No. 

Mini-Driver , Blade, Sagittal, Fine, ................................................................... K151■ 

6.4 x 14.2 x 0.38mm (0.015”) and 0.65mm (0.026”) 


6.4 x 30.0 x 0.38mm (0.015”) and 0.65mm (0.026”) 


10.2 x 14.2 x 0.38mm (0.015”) and 0.65mm (0.026”) 


9.5 x 42.7 x 0.38mm (0.015”) and 0.65mm (0.026”) 


14.0 x 42.7 x 0.38mm (0.015”) and 0.65mm (0.026”) 


9.5 x 10.0 x 0.38mm (0.015”) and 0.65mm (0.026”) 





40 

mm 

40 

mm 

10 

mm 

10 

mm 

25 

mm 

35 

mm 

35 

mm 

5 

mm 

5 

mm 


20 

mm 

30 

mm 

30 

mm 

15 

mm 

25 

mm 

25 

mm 

10 

mm 

10 

mm 

20 

mm 

20 

mm 

5 

mm 

5 

mm 

15 

mm 

15 

mm 

10 

mm 

10 

mm 

5 

mm 

5 

mm


Micro Oscillating 

Saw Blades 

For use with: 

MicroChoice ® Oscillating Saw (5020-024) 

Micro100 Oscillating Saw (5053-012) 

Micro E ® Oscillating Saw (5040-007) 

Flat Blades 


Cat. No. 

Micro Blade, Oscillating, Fine, Flat, 5.5 x 12.0 x 0.4mm, ............................. 5023-260 


Micro Blade, Oscillating, Fine, Flat, 10.0 x 12.0 x 0.4mm, ........................... 5023-261 














Micro Blade, Oscillating, Coarse, Flat, 10.0 x 18.5 x 0.4mm, ....................... 5023-363 


Micro Blade, Oscillating, Coarse, Flat, 5.5 x 18.5 x 0.4mm, ......................... 5023-362 


Micro Blade, Oscillating, Coarse, Flat, 10.0 x 12.0 x 0.4mm, ....................... 5023-361 


Micro Blade, Oscillating, Coarse, Flat, 5.5 x 12.0 x 0.4mm, ......................... 5023-360 



5023-2XX or -3XX = 5 per box, sterile

Angled Blades 


Saw Blades 



Cat. No. 

Micro, Blade, Oscillating, 20° Angled, 10.0 x 9.0 x 0.4mm,...................... 5023-258◆ 


Micro Blade, Oscillating, 20° Angled, 10.0 x 13.5 x 0.4mm,..................... 5023-259◆ 


Micro Blade, Oscillating, 20° Angled, 5.5 x 13.0 x 0.4mm,.......................... 5023-267 


Micro Blade, Oscillating, 20° Angled, 10.0 x 13.0 x 0.4mm,........................ 5023-268 


Crescentic Blades* 

Micro Blade, Crescentic, 9.0 x 12.0 x 0.4mm and ..................................... 5023-170■ 

Cutting Depth 12.0mm, Stainless Steel, 

Micro Blade, Crescentic, 13.5 x 25.5 x 0.4mm and ................................... 5023-171■ 







5023-2XX or -3XXX = 5 per box, sterile 



*US Patent 5,658,304



Saw Blades 

For use with: 

Micro100 Oscillating Saw (5053-012) 

Micro E ® Oscillating Saw (5040-007) 

Flat Blades 


Cat. No. 

Micro100/E (Only), Blade, Oscillating, 5.5 x 12.0 x 0.4mm ...................... 5053-060● 


Micro100/E (Only), Blade, Oscillating, 10.0 x 12.0 x 0.4mm .................... 5053-061● 














● = available only as single pack, non-sterile

Angled Blades 


Saw Blades 


Cat. No. 

Micro100 /Micro E ® (Only), Blade, Oscillating, 70° Angled, ..................... 5053-048● 

Thick Extend, 10.0 x 13.0 x .04mm 


Micro100/E (Only), Blade, Oscillating, 20° Angled, .................................. 5053-067● 


Micro100/E (Only), Blade, Oscillating, 20° Angled, .................................. 5053-068● 


Micro100/E (Only), Blade, Oscillating,............................. 5053-269 (Box of 5, Sterile) 

20° Double Angled, 10.0 x 13.0 x 0.4mm ............... 5053-069 (Single, Non-Sterile) 


Micro100/E (Only), Blade, Oscillating, 70° Angled, .................................. 5053-277◆ 


Micro100/E (Only), Blade, Oscillating, 70° Angled, .................................. 5053-278◆ 







Saw Blades 

For use with: 

Stryker Command 2 


Cat. No. 

Small Bone, Hall ® , Blade, Stryker, Oscillating, ............................................ 5053-310◆ 

5.5 x 25.2 x 0.4mm (0.016”) and 

Cut Thickness 0.8mm (0.031”), 

(Like Stryker 277-31-102) 

Small Bone, Hall, Blade, Stryker, Oscillating, ............................................. 5053-311◆ 

9.5 x 25.2 x 0.4mm (0.016”) and 




11.3 x 25.2 x 0.4mm (0.016”) and 




5.5 x 11.8 x 0.4mm (0.016”) and 




9.5 x 18.5 x 0.4mm (0.016”) and 





◆ = available only as box of 5, sterile

ARTHROSCOPY 

POWER 

PRODUCTS 

INDEX 


Numerical Index 

Cat. No. Description Page No. 

1368-005 VersipowerPlus ® /Series 4 ® , Adapter, Trinkle to 5/32" Jacobs H.15 

1368-008 VersipowerPlus/Series 4, Adapter, Trinkle to 1/4" Jacobs, long H.15 

1368-010 VersipowerPlus/Series 4, Adapter, Trinkle to 1/4" Jacobs, short H.15 

1375-012 Micro 100 /Micro E ® , Medium Bur Guard, stainless steel, overall length (cm) 4.57 H.8, H.32, H.33 

1375-028 Micro 100 Foot Control, non-sterile H.8 

1375-040 Accessory, Y Connector H.18 

1384-042 Accessory, Autoclave Case, large H.20 

1384-078 VersipowerPlus/Series 4, Adapter, Trinkle to Zimmer H.15 

1384-177 Large Bone, Hall ® , Blade, Oscillating, 8.5 x 38 x 0.4mm (0.016 in.) and cut thick 0.8mm (0.031 in.), sterile H.38 

2075-017 Accessory, Pressure Tester H.17 

5020-021 MicroChoice ® , Handpiece, Medium Speed Drill, Electric, stainless steel, non-sterile H.8, H.32 

5020-022 MicroChoice, Handpiece, Sagittal Saw, Electric, stainless steel, non-sterile H.8, H.42, H.45, H.46 

5020-024 MicroChoice, Handpiece, Oscillating Saw, Electric, stainless steel, non-sterile H.8, H.52 

5020-025 MicroChoice, Handpiece, High Speed Drill, Electric, stainless steel, non-sterile H.8, H.32 

5020-053 Accessory, 2-Pedal Footswitch, for use with Advantage ® /E9000 ® /PowerPro ® H.7 

5020-054 Accessory, Console Pole Mount H.21 

5020-057 MicroChoice, Accessory, Replacement Safe Slide H.8 

5020-058 MicroChoice, Accessory, Replacement Handpiece Lever H.8 

5020-060 MicroChoice, Bur Guard, medium, stainless steel, fits 5091 series burs, non-sterile H.8, H.32, H.33 

5023-055 Micro Blade, Abrader, straight, diamond coated, 25.0 x 6.3 x 3.8, can be used with MicroChoice, Micro 100 and Micro E, sterile H.43 

5023-056 Micro Blade, Abrader, medial, diamond coated, 25.0 x 6.3 x 3.8, can be used with MicroChoice, Micro 100 and Micro E, sterile H.43 

5023-057 Micro Blade, Abrader, lateral, diamond coated, 25.0 x 6.3 x 3.8, can be used with MicroChoice, Micro 100 and Micro E, sterile H.43 

5023-144 Micro Blade, Sagittal, stainless steel, coarse, flat, 5.5 x 18.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.43 

5023-170 Micro Blade, Crescentic, stainless steel, 9 x 12 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.53 

5023-171 Micro Blade, Crescentic, stainless steel, 13.5 x 25.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.53 


5023-176 Micro Blade, Crescentic, stainless steel, 13.5 x 32 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.53 

5023-186 Micro Blade, ACL, stainless steel, 8.5 x 38 x .4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.45 

5023-218 Micro Blade, Sagittal, stainless steel, fine, radial, 9.5 x 25.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.42 

5023-228 Micro Blade, Angled 70°, radial, stainless steel, 9.5 x 7.5 x 0.6mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.44 






5023-234 Micro Blade, Angled 90°, coarse, stainless steel, 5.5 x 9.0 x 0.6mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.44 




5023-238 Micro Blade, Sagittal, stainless steel, fine, flat, 9.5 x 25.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.42 







5023-258 Micro Blade, 20° Angled Oscillating, stainless steel, 10.0 x 9 x 0.4mm, can be used withMicroChoice, Micro 100 and Micro E, sterile H.53 

5023-259 Micro Blade, 20° Angled Oscillating, 10 x 13.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.53 

5023-260 Micro Blade, Oscillating, stainless steel, fine, flat, 5.5 x 12 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.52 

5023-261 Micro Blade, Oscillating, stainless steel, fine, flat, 10 x 12 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.52 


5023-263 Micro Blade, Oscillating, stainless steel, fine, flat, 10 x 18.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.52 

5023-264 Micro Blade, Oscillating, stainless steel, fine, flat, 5.5 x 28.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E , sterile H.52 


5023-266 Micro Blade, Oscillating, stainless steel, fine, flat, 18.5 x 28.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.52 

5023-267 Micro Blade, 20° Angled Oscillating, stainless steel, 5.5 x 13 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.53 

5023-268 Micro Blade, 20° Angled Oscillating, 10 x 13 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.53 


5023-282 Micro Blade, ACL, stainless steel, 19 x 41 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.45 

5023-283 Micro Blade, ACL, stainless steel, 9.5 x 25.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.45 

5023-284 Micro Blade, ACL, stainless steel, 9.5 x 41.0 x0 .4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.45 

5023-285 Micro Blade, ACL, stainless steel, 6.5 x 30.0 x .6mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.45 






5023-405 Micro Blade, ACL, Graft Harvesting, stainless steel, graft length 20mm, graft width 5mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.46 

5023-406 Micro Blade, ACL, Graft Harvesting, stainless steel, graft length 20mm, graft width 6mm, sterile, can be used with MicroChoice, Micro 100 and Micro E, sterile H.46 





5023-408 Micro Blade, ACL, Graft Harvesting, stainless steel, graft length 20mm, graft width 8mm, can be used with MicroChoice ® , Micro 100 and Micro E ® , sterile H.46 






5030-010 Accessory, Sterilization Case, 12 x 11 x 6 in. H.19, H.20, H.21 

5030-011 Accessory, Basket, Half Size, 10 x 11 x 2 in. H.19 

5030-020 Accessory, Autoclave Container, 18 x 12 x 6 in. H.19, H.20, H.21 

5030-021 Accessory, Autoclave Container, 17 x 11 x 2 in. H.19 

5030-025 Accessory, Sterile Processing Cards H.21 

5030-026 Accessory, Tamper Evident Arrows H.21 

5030-028 Accessory, Small Clamp H.21 

5030-029 Accessory, Medium Clamp H.21 

5030-030 Accessory, Large Clamp H.21 

5030-031 Accessory, ID Plate, "Hall ® Surgical" H.19 

5030-040 Accessory, Sterile Container Accessory Kit H.21 

5037-033 Accessory, Filters, Disposable, 9 x 9 in., Non-sterile H.20, H.21 

5039-003 Accessory, Power Cord, 10 ft. (3.05m) H.16 

5040-011 VersipowerPlus ® /Series 4 ® , Adapter, Trinkle Wiredriver H.15 

5044-145 Micro Blade, Sagittal, stainless steel, fine, flat, 10.0 x 18.5.0 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.43 

5044-999-52 Accessory, Key for 1/4" Jacobs Chuck H.16 


5052-010 Accessory, Universal Hose, 10 ft (3.05m), for use with all Hall Air Systems H.8, H.16 

5052-012 Accessory, Sterilization Case, 10 x 7 x 3.3 in. H.20 

5052-016 Accessory, Universal Hose, 15 ft (4.57m), for use with all Hall Air Systems H.16 


5052-018 Accessory, Extension Hose, 10 ft (3.05m), for use with all Hall Air Systems H.16 

5052-019 VersipowerPlus/Series 4, Adapter, Two-Way Pin Driver, Trinkle H.15 




5052-101 Accessory, Hose Handler H.17 

5052-400 Accessory, Bur and Blade Rack H.21 

5053-009 Micro 100, Handpiece, Drill, without hose H.8, H.32 

5053-011 Micro 100, Handpiece, Sagittal Saw, without hose H.38, H.42, H.45, H.46, H.47 

5053-012 Micro 100, Handpiece, Oscillator Saw, without hose H.52, H.54 

5053-018 Micro 100/E (only) Sagittal Blade, 10 x 25.5mm, non-sterile H.47 

5053-028 Micro 100/E (only) Sagittal Blade, angled, 9.5 x 7.5mm, non-sterile H.48 




5053-032 Micro 100/E (only) Sagittal Blade, 6.5 x 25.5mm, non-sterile H.47 











5053-048 Micro 100/E (only) Oscillating Blade, angled, thick extend, non-sterile H.55 

5053-060 Micro 100/E (only) Oscillating Blade, 5.5 x 12.0mm, non-sterile H.54 









5053-069 Micro 100/E (only) Oscillating Blade, angled, 10.0 x 13.0mm, non-sterile H.55 


5053-124 Accessory, Cleaning Brush H.18 

5053-269 Micro 100/E Oscillating Saw Blade, angled, 10.0 x 13.0mm, sterile H.55 



5053-310 Micro Blade, Stryker Replacement, 277-31-102, 5.5 x 25.2mm, sterile H.56 





5053-312 Micro Blade, Stryker Replacement, 277-31-104, 11.3 x 25.25 x 0.4mm, sterile H.56 



5058-001 Surgairtome Two ® Handpiece, without hose H.8, H.32 

5059-282 Large Bone, Hall ® , Blade, Oscillating, 19 x 41 x 0.4mm (0.016 in.) and cut thick 0.8mm (0.031 in.), sterile H.38 

5059-283 Large Bone, Hall, Blade, Oscillating, 9.5 x 25.5 x 0.4mm (0.016 in.) and cut thick 0.6mm (0.024 in.), sterile H.38 

5059-284 Large Bone, Hall, Blade, Oscillating, 9.5 x 41 x 0.4mm (0.016 in.) and cut thick 0.6mm (0.024 in.), sterile H.38 


5067-002 Series 4 ® , Handpiece, Oscillating Saw, Pneumatic, without hose H.15, H.36, H.37, H.38 

5067-004 Series 4, Handpiece, Trauma Drill, Pneumatic, without hose H.15 

5071-105 Large Bone, Hall, Blade, Graft Harvesting, 5mm Graft Thickness, 20mm maximum cutting depth, 0.4mm (0.016 in.) material thickness, sterile H..36 









5071-127 Large Bone, Hall, Blade, ACL 8.5 x 38 x 0.4mm, (0.016 in.) and cut thick 0.7mm (0.028 in.), sterile H.37 





5091-113 Micro Bur, Taperd, Fissure, Medium, 2.1 x 4.9mm, #703 H.32 

5091-201 Micro Bur, side cutting carbide, straight, 1.0 x 5.0mm, medium, sterile H.32 



5091-206 Micro Bur, side cutting carbide, tapered, 2.0 x 7.5mm, medium, sterile H.32 

5091-212 Micro Bur, side cutting carbide, Lindemann, 1.6 x 31mm, medium, sterile H.32 







5091-219 Micro Bur, side cutting carbide, round, 1.2 x 3.7mm, medium, sterile H.32 

5091-221 Micro Bur, round carbide, 1.8mm, medium, sterile H.32 









5091-236 Micro Bur, oval carbide, 4.0 x 8mm, medium, sterile H.33 


5091-247 Micro Bur, wire pass steel, 1.0 x 19mm, medium, sterile H.33 



5091-252 Micro Bur, barrel cutting carbide, 2.0 x 10mm, medium, sterile H.33 


5091-260 Micro Bur, round diamond, 2.0mm, medium, sterile H.33 



5091-270 Micro Bur, oval diamond, 4 x 8mm, medium, sterile H.33 

5091-271 Micro Bur, Tapered, Fissure, Medium, 1.2 x 2.3mm, #701 H.32 


5144-002 Accessory, Schrader Coupler H.18 

8593 Drill Bit, Badger ®, 7.5mm x 9" H.39 

8594 Drill Bit, Badger, 10.0mm x 9" H.39 




8604 Twist Drill, 3.2mm, Soft Tissue Anchoring Set H.41 


8730 Screw Drill Set, for Patella Tendon Graft Guides H.34 

8733 Twist Drill, 2.0mm H.34 




9246A Large Hub, Shaver, Sterling, Full Radius Resector, 5.5mm, 6000rpm max,13cm Working length H.23 


9260A Large Hub, Shaver, Sterling, Gator ® , 5.5mm, 6000rpm max, 13cm Working length H.23 

9263A Large Hub, Shaver, Sterling, Gator, 4.2mm, 6000rpm max, 13cm Working length H.23 

9297A Large Hub, Shaver, Sterling, Great White ® , 4.8mm, 6000rpm max, 13cm Working length H.22 

9298A Large Hub, Shaver, Sterling, Mako , 4.2mm, 6000rpm max, 13cm Working length H.22 

9299A Large Hub, Shaver, Sterling, Great White, 4.2mm, 6000rpm max, 13cm Working length H.22 

9399A Large Hub, Shaver, Sterling, Great White, 3.5mm, 6000rpm max, 13cm Working Length H.22 

9761A Large Hub, Shaver, Sterling, Meniscus Cutter, 4.2mm, 6000rpm max, 13cm Working length H.25 

A101 Accessory, Air Hose, Mini-Driver K200, Micro-Driver U100, Minos A200P and A300, Staplizer ® T100, 20' H.17 

A201 Accessory, Air Hose, Mini-Driver K200, Micro-Driver U100, Minos A200P and A300, Staplizer T100, 10' H.17 

C8582 Drill Bit, Badger ® , 7.0mm H.39 

C8583 Drill Bit, Badger, 8.5mm H.39 



C8599 Drill Bit, Badger, 8.0mm x 9" H.39 


C8802 Blade, Saw, Free-Hand, VersiPower Plus ® , Series 3/4 H.35 

C8803 Blade, Saw, Free-Hand, Micro 100 /Series 3/4, VersiPower Plus H.35 

C8804 Blade, Saw, Free-Hand, MicroChoice ® /Micro 100 H.35 

C8805 Blade, Saw, Free-Hand, Stryker 2000 H.35 

C8806 Blade, Saw, Free-Hand, 10mm Depth, H.35 

C9101 Large Hub, Bur, Sterling, Oval, 4.0mm, 3500rpm max, 13cm Working length H.26 

C9241 Large Hub, Shaver, Merlin ® , Full Radius Resector, 4.2mm, Pre-bent 15°, 6000rpm max, 13cm Working length H.23 

C9245 Large Hub, Shaver, Sterling, Full Radius Resector, 4.8mm, 6000rpm max,13cm Working length H.23 


C9253 Large Hub, Shaver, Sterling, Cuda ® , 3.5mm, 6000rpm max, 13cm Working length H.24 

C9254 Large Hub, Shaver, Sterling, Cuda, 4.2mm, 6000rpm max, 13cm Working length H.24 


C9256 Large Hub, Shaver, Merlin, Cuda, 4.2mm, Pre-Bent 15° max, 6000rpm max, 13cm Working length H.24 


C9262 Large Hub, Shaver, Sterling, Gator, 4.8mm, 6000rpm max, 13cm Working length H.23 


C9266 Large Hub, Shaver, Merlin, Gator, 4.2mm, Pre-bent 15°, 6000rpm max, 13cm Working length H.23 

C9274 Large Hub, Shaver, Sterling, Slotted Whisker, 4.2mm, 6000rpm max, 13cm Working length H.25 


C9283 Large Hub, Shaver, Sterling, End Cutter, 3.5mm, 6000rpm max, 13cm Working length H.24 


C9290 Large Hub, Shaver, Sterling, Dragon ® End Cutter, 3.5mm, 6000rpm max, 13cm Working length H.25 

C9291 Large Hub, Shaver, Sterling, Dragon End Cutter, 4.2mm, 6000rpm max, 13cm Working length H.25 


C9298A Large Hub, Shaver, Mako, 5.5mm, 6000rpm max, 13cm Working length H.22 

C9299P Large Hub, Shaver, Great White, 4.2mm pre-bent 15°, 6000rpm max, 13cm Working Length H.22 

C9405 Large Hub, Shaver, Ultracut ® Full Radius, 4.2mm, 6000rpm max, 13cm Working length H.22 

C9415 Large Hub, Shaver, Ultracut Full Radius, 5.5mm, 6000rpm max, 13 cm Working Length H.22 

C9760 Large Hub, Shaver, Sterling, Meniscus Cutter, 3.5mm, 6000rpm max, 13cm Working length H.25 


C9820 Apex ® , Handpiece, Basic H.22, H.23, H.24, H.25, H.26, H.27 

C9824 Apex, Handpiece, 2-button H.22, H.23, H.24, H.25, H.26, H.27 

C9828 Apex, Handpiece, Full Function H.22, H.23, H.24, H.25, H.26, H.27 

C9863 Accessory, Footswitch, 3-Pedal , for use with Advantage ® /E9000 ® /PowerPro ® H.7 

C9911 Micro Hub, Bur, Sterling, Spherical, 2.9mm, 13cm Working length H.31 


C9940 Micro Hub, Shaver, Sterling, Full Radius Resector, 2.0mm, 5000rpm max,7.6cm Working length H.29 



C9950 Micro Hub, Shaver, Sterling, Cuda, 2.0mm, 5000rpm max, 7.6cm Working length H.30 



C9960 Micro Hub, Shaver, Sterling, Gator, 2.0mm, 5000rpm max,7.6cm Working length H.29 



C9981 Micro Hub, Shaver, Sterling, Slotted Whisker, 2.9mm, 5000rpm max, 7.6cm Working length H.30 

C9990 Micro Hub, Router, Sterling, Vortex ® , 2.9mm, Hooded, 13cm Working length H.31 

C9991 Micro Hub, Router, Sterling, Vortex, 3.5mm, Hooded, 13cm Working length H.31 

CR8847 Coring Reamer, 7.0mm H.40 








CR8900 Coring Reamer, Plunger, reusable H.40 

CR8901 Coring Reamer, Adapter, reusable H.40 

CR8902 Coring Reamer, Wrench, reusable H.40 

D3000 Advantage ® , Console with Cord, 115 volt, weight 19 lbs, 54 oz (8.86kg) H.7 

D3000I Advantage, Console with Cord, 230 volt, weight 19 lbs, 54 oz (8.86kg) H.7 

D3000J Advantage, Console with Cord, 100 volt, weight 19 lbs, 54 oz (8.86kg) H.7 

D9820 Advantage, No Button Shaver Handpiece H.8, H.22, H.23, H.24, H.25, H.26, H.27 

D9824 Advantage, 2 Button Shaver Handpiece H.8, H.22, H.23, H.24, H.25, H.26, H.27 

E306 Accessory, Autoclave Case, Universal H.20 

E9000 E9000 ® , Console, with Cord, 115 volt, 11.75 in. (w) x 4.63 in. (h) x 12.25 in. (d) 15.4 lbs. (7.0kg) H.7, H.8 

EL9101 Large Hub, Bur, Sterling, Oval, 4.0mm, Extended Length, 3500rpm max, 19cm Working length H.26 

EL9356 Large Hub, Shaver, Sterling, Cuda ® , 4.2mm, Extended Length, 6000rpm max, 19cm Working length H.24 

H9000 Large Hub, Bur Sheath for 5.5 or 6.0 Burs, Used to Create Unhooded Burrs H.27 

H9002 Large Hub, Bur Sheath for 4.0 or 4.5 Burs, Used to Create Unhooded Burs H.27 

H9101 Large Hub, Bur, Sterling, Oval, 4.0mm, High Speed, 10,000rpm max, 13cm Working length H.26 

H9101RH Large Hub, Bur, Sterling, Oval, 4.0mm, Reduced Hood, High Speed, 10,000rpm max, 13cm Working length H.26 


H9110 Large Hub, Bur, Sterling, Spherical, 3.5mm, High Speed, 10,000rpm max, 13cm Working length H.26 



H9112RH Large Hub, Bur, Sterling Spherical, 5.5mm, Reduced Hood, High Speed, 10,000rpm max, 13cm Working length H.26 

H9118 Large Hub, Bur, Sterling, Cyclone, 4.5mm, High Speed, 10,000rpm max, 13cm Working length H.27 


H9121 Large Hub, Bur, Sterling, Tapered, 4.0mm, High Speed, 10,000rpm max, 13cm Working length H.26 

H9121RH Large Hub, Bur, Sterling, Tapered, 4.0mm, Reduced Hood, High Speed, 10,000rpm max, 13cm Working length H.26 


H9131 Large Hub, Router, Sterling, Vortex ® , 4.5mm, Hooded, High Speed, 10,000rpm max, 13cm Working length H.27 

H9132 Large Hub, Router, Sterling, Vortex, 6.0mm, Hooded, High Speed, 10,000rpm max, 13cm Working length H.27 

H9133 Large Hub, Bur, Sterling, Lightning ® , 4.5mm, High Speed, 10,000rpm max, 13cm Working length H.27 

H9134 Large Hub, Router, Sterling, Vortex, 4.5mm, Unhooded, High Speed, 10,000rpm max, 13cm Working length H.27 

H9135 Large Hub, Bur, Sterling, Oval, Left Helix, 6.0mm, High Speed, 10,000rpm max, 13 cm Working Length H.26 

K120 Mini-Driver , Attachment, Sagittal Saw, stainless steel, can only be used with pneumatic handpiece, non-sterile H.34, H.49 

K121 Mini-Driver Blade, Sagittal, fine for Sagittal Saw K120 only, 15.1x6.4x0.89mm, sterile H.49 


























K200 Mini-Driver, Handpiece, Pneumatic, stainless steel, weight 502.0 g, non-sterile H.17, H.49 

K220 Mini-Driver, Attachment, Sagittal Saw, stainless steel, non-sterile H.50 

M207 Accessory, Nitrogen Regulator, Single H.18 

M208 Accessory, Nitrogen Regulator, Dual H.18 

M321 Accessory, Male Stryker to Female H.17 

M322 Accessory, Diss to Schrader Adaptor H.17 

M9246A Micro Hub, Shaver, Sterling, Full Radius Resector, 5.5mm, 5000rpm max, 13cm Working length H.29 

M9247A Micro Hub, Shaver, Sterling, Full Radius Resector, 4.2mm, 5000rpm max,13cm Working length H.29 

M9260A Micro Hub, Shaver, Sterling, Gator ® , 5.5mm, 5000rpm max,13cm Working length H.29 

M9263A Micro Hub, Shaver, Sterling, Gator, 4.2mm, 5000rpm max,13cm Working length H.29 

M9298A Micro Hub, Shaver, Sterling, Mako , 4.2mm, 5000rpm max,13cm Working length H.28 

M9299A Micro Hub, Shaver, Sterling, Great White ® , 4.2mm, 5000rpm max,13cm Working length H.28 




MC1000 Micro Cannula Adaptors H.30 

MC5057 Accessory, Handpiece Cord H.7 

MC9106 Micro Hub, Bur, Sterling, Oval, 6.0mm, Left Helix, 5000rpm max, 13cm Working length H.31 

MC9245 Micro Hub, Shaver, Sterling, Full Radius Resector, 4.8mm, 5000rpm max,13cm Working length H.29 


MC9253 Micro Hub, Shaver, Sterling, Cuda ® , 3.5mm, 5000rpm max, 13cm Working length H.30 

MC9254 Micro Hub, Shaver, Sterling, Cuda, 4.2mm, 5000rpm max, 13cm Working length H.30 



MC9262 Micro Hub, Shaver, Sterling, Gator ® , 4.8mm, 5000rpm max,13cm Working length H.29 

MC9264 Micro Hub, Shaver, Sterling, Gator, 3.5mm, 5000rpm max,13cm Working length H.29 

MC9274 Micro Hub, Shaver, Sterling, Slotted Whisker, 4.2mm, 5000rpm max, 13cm Working length H.30 

MC9290 Micro Hub, Shaver, Sterling, Dragon ® , 3.5mm, 5000rpm max, 13cm Working length H.30 

MC9291 Micro Hub, Shaver, Sterling, Dragon, 4.2mm, 5000rpm max, 13cm Working length H.30 


MC9840 MicroChoice ® , Handpiece, Small Hub Shaver H.8, H.28, H.29, H.30, H.31 

MH9102 Micro Hub, Bur, Sterling, Oval, 6.0mm, 5000rpm max, 13cm Working length H.31 

MH9111 Micro Hub, Bur, Sterling, Spherical, 4.5mm, 5000rpm max, 13cm Working length H.31 


MH9131 Micro Hub, Router, Sterling, Vortex ® , 4.5mm, Hooded, 5000rpm max, 13cm Working length H.31 

MH9132 Micro Hub, Router, Sterling, Vortex, 6.5mm, Hooded, 5000rpm max, 13cm Working length H.31 

MP9249 Micro Hub, Shaver, Merlin ® , Full Radius Resector, 4.2mm, Pre-Bent 15°, 5000rpm max,13cm Working length H.29 

MP9259 Micro Hub, Shaver, Merlin, Cuda, 4.2mm, Pre-Bent 15°, 5000rpm max, 13cm Working length H.30 

MP9269 Micro Hub, Shaver, Merlin, Gator, 4.2mm, Pre-Bent 15°, 5000rpm max,13cm Working length H.29 

MP9356 Micro Hub, Shaver, Merlin, Cuda, 4.2mm, Bendable 30° max, 5000rpm max, 13cm Working length H.30 

MP9366 Micro Hub, Shaver, Merlin, Gator, 4.2mm, Bendable 30° max, 5000rpm max,13cm Working length H.29 

MP9376 Micro Hub, Shaver, Merlin, Full Radius Resector, 4.2mm, Bendable 30° max, 5000rpm max, 13cm Working length, 6/box H.29 

P9355 Large Hub, Shaver, Merlin, Cuda, 3.7mm, Bendable 30° max, 6000rpm max, 13cm Working length, sterile H.24 



P9365 Large Hub, Shaver, Merlin, Gator, 3.7mm, Bendable 30° max, 6000rpm max, 13cm Working length, sterile H.23 



P9375 Large Hub, Shaver, Merlin, Full Radius Resector, 3.7mm, Bendable 30° max, 6000rpm max, 13cm Working length, sterile H.23 



PRO2028 PowerPro ® , Attachment, Wiredriver H.11 

PRO2030 PowerPro, Attachment, 5/32" Jacobs Chuck H.12 

PRO2032 PowerPro, Attachment, Pindriver H.11 


PRO2043 PowerPro, Attachment, Sagittal Saw H.12 

PRO2046 PowerPro, Attachment, Zimmer/Hudson H.12 

PRO2200E PowerPro, Handpiece, Two-Trigger, Electric H.9, H.11 

PRO2250 PowerPro, Attachment, 1/4" Keyless Chuck H.12 

PRO3010 PowerPro Battery Standard Large Battery H.10, H.12, H.13 

PRO3020 PowerPro Battery Standard Small Battery H.10, H.12, H.13, H.14 

PRO3110 PowerPro Transfer Battery Case H.13, H.14 

PRO3115 PowerPro Sterile Transfer Battery Large H.12, H.13, H.14 

PRO3130 PowerPro Sterile Transfer Battery Shroud H.13 

PRO3135 PowerPro Sterile Battery Platform H.12, H.14 

PRO3200 PowerPro Surecharge Case H.12, H.14 

PRO3205 PowerPro Battery Disposable Filter H.14 

PRO3600 PowerPro Battery Charger H.12, H.14 

PRO5028 PowerPro, Battery Wire Driver H.11 

PRO5032 PowerPro, Battery Pin Driver H.11 

PRO5090 PowerPro Sterilization Case H.14 

PRO5100 PowerPro Battery Handpiece H.10, H.11 

PRO5200 PowerPro Battery 2 Trigger Full Function Handpiece H.10, H.11 

PRO5250 PowerPro Battery 2 Trigger Standard Handpiece H.11 

PRO5300 PowerPro Battery Oscillator H.10, H.36, H.37 

PRO6028 PowerPro, Electric II, Attachment, Wire Driver H.11 

PRO6032 PowerPro, Electric II, Attachment, Pin Driver H.11 


PRO6100 PowerPro Electric II Modular Handpiece H.9, H.11 

PRO6125 PowerPro Electric II Ocillating Saw Handpiece H.9, H.36, H.37 

U100 Micro-Driver , Handpiece, Pneumatic, stainless steel/aluminum, weight 3.25 oz (92.1g), non-sterile H.17 


Alphabetical Index 


5020-053 Accessory, 2-Pedal Footswitch, for use with Advantage ® /E9000 ® /PowerPro ® H.7 

A201 Accessory, Air Hose, Mini-Driver K200, Micro-Driver U100, Mino s A200P and A300, Staplizer ® T100, 10' H.17 

A101 Accessory, Air Hose, Mini-Driver K200, Micro-Driver U100, Minos A200P and A300, Staplizer T100, 20' H.17 

1384-042 Accessory, Autoclave Case, large H.20 

E306 Accessory, Autoclave Case, Universal H.20 

5030-021 Accessory, Autoclave Container, 17 x 11 x 2 in. H.19 

5030-020 Accessory, Autoclave Container, 18 x 12 x 6 in. H.19, H.20, H.21 

5030-011 Accessory, Basket, Half Size, 10 x 11 x 2 in. H.19 

5052-400 Accessory, Bur and Blade Rack H.21 

5053-124 Accessory, Cleaning Brush H.18 

5020-054 Accessory, Console Pole Mount H.21 

M322 Accessory, Diss to Schrader Adaptor H.17 

5052-018 Accessory, Extension Hose, 10 ft (3.05m), for use with all Hall ® Air Systems H.16 




5037-033 Accessory, Filters, Disposable, 9 x 9 in., Non-sterile H.20, H.21 

C9863 Accessory, Footswitch, 3-Pedal , for use with Advantage/E9000/PowerPro H.7 

MC5057 Accessory, Handpiece Cord H.7 

5052-101 Accessory, Hose Handler H.17 

5030-031 Accessory, ID Plate, "Hall Surgical" H.19 



5030-030 Accessory, Large Clamp H.21 

M321 Accessory, Male Stryker to Female H.17 

5030-029 Accessory, Medium Clamp H.21 

M208 Accessory, Nitrogen Regulator, Dual H.18 

M207 Accessory, Nitrogen Regulator, Single H.18 

5039-003 Accessory, Power Cord, 10 ft. (3.05m) H.16 

2075-017 Accessory, Pressure Tester H.17 

5144-002 Accessory, Schrader Coupler H.18 

5030-028 Accessory, Small Clamp H.21 

5030-040 Accessory, Sterile Container Accessory Kit H.21 

5030-025 Accessory, Sterile Processing Cards H.21 

5052-012 Accessory, Sterilization Case, 10 x 7 x 3.3 in. H.20 

5030-010 Accessory, Sterilization Case, 12 x 11 x 6 in. H.19, H.20, H.21 

5030-026 Accessory, Tamper Evident Arrows H.21 

5052-010 Accessory, Universal Hose, 10 ft (3.05m), for use with all Hall Air Systems H.8, H.16 



1375-040 Accessory, Y Connector H.18 

D9824 Advantage, 2 Button Shaver Handpiece H.8, H.22, H.23, H.24, H.25, H.26, H.27 

D3000J Advantage, Console with Cord, 100 volt, weight 19 lbs, 54 oz (8.86kg) H.7 

D3000 Advantage, Console with Cord, 115 volt, weight 19 lbs, 54 oz (8.86kg) H.7 

D3000I Advantage, Console with Cord, 230 volt, weight 19 lbs, 54 oz (8.86kg) H.7 

D9820 Advantage, No Button Shaver Handpiece H.8, H.22, H.23, H.24, H.25, H.26, H.27 

C9824 Apex ® , Handpiece, 2-button H.22, H.23, H.24, H.25, H.26, H.27 

C9820 Apex, Handpiece, Basic H.22, H.23, H.24, H.25, H.26, H.27 

C9828 Apex, Handpiece, Full Function H.22, H.23, H.24, H.25, H.26, H.27 

C8806 Blade, Saw, Free-Hand, 10mm Depth, H.35 

C8803 Blade, Saw, Free-Hand, Micro 100 /Series 3/4, VersiPower Plus H.35 

C8804 Blade, Saw, Free-Hand, MicroChoice/Micro 100 H.35 

C8805 Blade, Saw, Free-Hand, Stryker 2000 H.35 

C8802 Blade, Saw, Free-Hand, VersiPower Plus, Series 3/4 H.35 






CR8901 Coring Reamer, Adapter, reusable H.40 

CR8900 Coring Reamer, Plunger, reusable H.40 

CR8902 Coring Reamer, Wrench, reusable H.40 

C8582 Drill Bit, Badger ® , 7.0mm H.39 











8595 Drill Bit, Badger ® , 11.0mm x 9" H.39 



E9000 E9000 ® , Console, with Cord, 115 volt, 11.75 in. (w) x 4.63 in. (h) x 12.25 in. (d) 15.4 lbs. (7.0kg) H.7, H.8 

5071-232 Large Bone, Hall ® , Blade, ACL 19.5 x 41 x 0.4mm, (0.016 in.) and cut thick 0.7mm (0.028 in.), sterile H.37 
















5059-283 Large Bone, Hall, Blade, Oscillating, 9.5 x 25.5 x 0.4mm (0.016 in.) and cut thick 0.6mm (0.024 in.), sterile H.38 


5059-282 Large Bone, Hall, Blade, Oscillating, 19 x 41 x 0.4mm (0.016 in.) and cut thick 0.8mm (0.031 in.), sterile H.38 

H9002 Large Hub, Bur Sheath for 4.0 or 4.5 Burs, Used to Create Unhooded Burs H.27 

H9000 Large Hub, Bur Sheath for 5.5 or 6.0 Burs, Used to Create Unhooded Burrs H.27 

H9112RH Large Hub, Bur, Sterling Spherical, 5.5mm, Reduced Hood, High Speed, 10,000rpm max, 13cm Working length H.26 



H9133 Large Hub, Bur, Sterling, Lightning ® , 4.5mm, High Speed, 10,000rpm max, 13cm Working length H.27 

C9101 Large Hub, Bur, Sterling, Oval, 4.0mm, 3500rpm max, 13cm Working length H.26 

EL9101 Large Hub, Bur, Sterling, Oval, 4.0mm, Extended Length, 3500rpm max, 19cm Working length H.26 


H9101RH Large Hub, Bur, Sterling, Oval, 4.0mm, Reduced Hood, High Speed, 10,000rpm max, 13cm Working length H.26 


H9135 Large Hub, Bur, Sterling, Oval, Left Helix, 6.0mm, High Speed, 10,000rpm max, 13 cm Working Length H.26 





H9121RH Large Hub, Bur, Sterling, Tapered, 4.0mm, Reduced Hood, High Speed, 10,000rpm max, 13cm Working length H.26 


H9131 Large Hub, Router, Sterling, Vortex ® , 4.5mm, Hooded, High Speed, 10,000rpm max, 13cm Working length H.27 

H9134 Large Hub, Router, Sterling, Vortex, 4.5mm, Unhooded, High Speed, 10,000rpm max, 13cm Working length H.27 

H9132 Large Hub, Router, Sterling, Vortex, 6.0mm, Hooded, High Speed, 10,000rpm max, 13cm Working length H.27 

C9299P Large Hub, Shaver, Great White ® , 4.2mm pre-bent 15°, 6000rpm max, 13cm Working Length H.22 

C9298A Large Hub, Shaver, Mako , 5.5mm, 6000rpm max, 13cm Working length H.22 

P9355 Large Hub, Shaver, Merlin, Cuda ® , 3.7mm, Bendable 30° max, 6000rpm max, 13cm Working length, sterile H.24 


C9256 Large Hub, Shaver, Merlin, Cuda, 4.2mm, Pre-Bent 15° max, 6000rpm max, 13cm Working length H.24 




C9241 Large Hub, Shaver, Merlin, Full Radius Resector, 4.2mm, Pre-bent 15°, 6000rpm max, 13cm Working length H.23 


P9365 Large Hub, Shaver, Merlin, Gator ® , 3.7mm, Bendable 30° max, 6000rpm max, 13cm Working length, sterile H.23 


C9266 Large Hub, Shaver, Merlin, Gator, 4.2mm, Pre-bent 15°, 6000rpm max, 13cm Working length H.23 





EL9356 Large Hub, Shaver, Sterling, Cuda, 4.2mm, Extended Length, 6000rpm max, 19cm Working length H.24 














C9264 Large Hub, Shaver, Sterling, Gator ® , 3.5mm, 6000rpm max, 13cm Working length H.23 




9399A Large Hub, Shaver, Sterling, Great White ® , 3.5mm, 6000rpm max, 13cm Working Length H.22 



9298A Large Hub, Shaver, Sterling, Mako , 4.2mm, 6000rpm max, 13cm Working length H.22 


9761A Large Hub, Shaver, Sterling, Meniscus Cutter, 4.2mm, 6000rpm max, 13cm Working length H.25 




C9405 Large Hub, Shaver, Ultracut® Full Radius, 4.2mm, 6000rpm max, 13cm Working length H.22 

C9415 Large Hub, Shaver, Ultracut Full Radius, 5.5mm, 6000rpm max, 13 cm Working Length H.22 

1375-028 Micro 100 Foot Control, non-sterile H.8 

5053-009 Micro 100, Handpiece, Drill, without hose H.8, H.32 

5053-012 Micro 100, Handpiece, Oscillator Saw, without hose H.52, H.54 

5053-011 Micro 100, Handpiece, Sagittal Saw, without hose H.38, H.42, H.45, H.46, H.47 

5053-060 Micro 100/Micro E ® (only) Oscillating Blade, 5.5 x 12.0mm, non-sterile H.54 










5053-069 Micro 100/E (only) Oscillating Blade, angled, 10.0 x 13.0mm, non-sterile H.55 

5053-048 Micro 100/E (only) Oscillating Blade, angled, thick extend, non-sterile H.55 




















1375-012 Micro 100/Micro E, Medium Bur Guard, stainless steel, overall length (cm) 4.57 H.8, H.32, H.33 

5023-268 Micro Blade, 20° Angled Oscillating, 10 x 13 x 0.4mm, can be used with MicroChoice ® , Micro 100 and Micro E, sterile H.53 

5023-259 Micro Blade, 20° Angled Oscillating, 10 x 13.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.53 

5023-267 Micro Blade, 20° Angled Oscillating, stainless steel, 5.5 x 13 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.53 

5023-258 Micro Blade, 20° Angled Oscillating, stainless steel, 10.0 x 9 x 0.4mm, can be used withMicroChoice, Micro 100 and Micro E, sterile H.53 

5023-057 Micro Blade, Abrader, lateral, diamond coated, 25.0 x 6.3 x 3.8, can be used with MicroChoice, Micro 100 and Micro E, sterile H.43 

5023-056 Micro Blade, Abrader, medial, diamond coated, 25.0 x 6.3 x 3.8, can be used with MicroChoice, Micro 100 and Micro E, sterile H.43 

5023-055 Micro Blade, Abrader, straight, diamond coated, 25.0 x 6.3 x 3.8, can be used with MicroChoice, Micro 100 and Micro E, sterile H.43 


5023-406 Micro Blade, ACL, Graft Harvesting, stainless steel, graft length 20mm, graft width 6mm, sterile, can be used with MicroChoice, Micro 100 and Micro E, sterile H.46 








5023-282 Micro Blade, ACL, stainless steel, 19 x 41 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.45 




5023-285 Micro Blade, ACL, stainless steel, 6.5 x 30.0 x .6mm, can be used with MicroChoice ® , Micro 100 and Micro E ® , sterile H.45 

5023-186 Micro Blade, ACL, stainless steel, 8.5 x 38 x .4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.45 

5023-283 Micro Blade, ACL, stainless steel, 9.5 x 25.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.45 

5023-284 Micro Blade, ACL, stainless steel, 9.5 x 41.0 x0 .4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.45 






5023-171 Micro Blade, Crescentic, stainless steel, 13.5 x 25.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.53 

5023-176 Micro Blade, Crescentic, stainless steel, 13.5 x 32 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.53 









5023-266 Micro Blade, Oscillating, stainless steel, fine, flat, 18.5 x 28.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.52 














5044-145 Micro Blade, Sagittal, stainless steel, fine, flat, 10.0 x 18.5.0 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.43 







5023-218 Micro Blade, Sagittal, stainless steel, fine, radial, 9.5 x 25.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile H.42 



5053-312 Micro Blade, Stryker Replacement, 277-31-104, 11.3 x 25.25 x 0.4mm, sterile H.56 







5091-270 Micro Bur, oval diamond, 4 x 8mm, medium, sterile H.33 













5091-212 Micro Bur, side cutting carbide, Lindemann, 1.6 x 31mm, medium, sterile H.32 

5091-219 Micro Bur, side cutting carbide, round, 1.2 x 3.7mm, medium, sterile H.32 




















MC1000 Micro Cannula Adaptors H.30 

MH9102 Micro Hub, Bur, Sterling, Oval, 6.0mm, 5000rpm max, 13cm Working length H.31 

MC9106 Micro Hub, Bur, Sterling, Oval, 6.0mm, Left Helix, 5000rpm max, 13cm Working length H.31 





C9990 Micro Hub, Router, Sterling, Vortex ® , 2.9mm, Hooded, 13cm Working length H.31 

C9991 Micro Hub, Router, Sterling, Vortex, 3.5mm, Hooded, 13cm Working length H.31 



MP9356 Micro Hub, Shaver, Merlin, Cuda ® , 4.2mm, Bendable 30° max, 5000rpm max, 13cm Working length H.30 

MP9259 Micro Hub, Shaver, Merlin, Cuda, 4.2mm, Pre-Bent 15°, 5000rpm max, 13cm Working length H.30 

MP9376 Micro Hub, Shaver, Merlin, Full Radius Resector, 4.2mm, Bendable 30° max, 5000rpm max, 13cm Working length, 6/box H.29 

MP9249 Micro Hub, Shaver, Merlin, Full Radius Resector, 4.2mm, Pre-Bent 15°, 5000rpm max,13cm Working length H.29 

MP9366 Micro Hub, Shaver, Merlin, Gator ® , 4.2mm, Bendable 30° max, 5000rpm max,13cm Working length H.29 

MP9269 Micro Hub, Shaver, Merlin, Gator, 4.2mm, Pre-Bent 15°, 5000rpm max,13cm Working length H.29 
















M9247A Micro Hub, Shaver, Sterling, Full Radius Resector, 4.2mm, 5000rpm max,13cm Working length H.29 


M9246A Micro Hub, Shaver, Sterling, Full Radius Resector, 5.5mm, 5000rpm max, 13cm Working length H.29 







M9299A Micro Hub, Shaver, Sterling, Great White ® , 4.2mm, 5000rpm max,13cm Working length H.28 

M9298A Micro Hub, Shaver, Sterling, Mako , 4.2mm, 5000rpm max,13cm Working length H.28 

C9981 Micro Hub, Shaver, Sterling, Slotted Whisker, 2.9mm, 5000rpm max, 7.6cm Working length H.30 

MC9274 Micro Hub, Shaver, Sterling, Slotted Whisker, 4.2mm, 5000rpm max, 13cm Working length H.30 

5020-060 MicroChoice ® , Bur Guard, medium, stainless steel, fits 5091 series burs, non-sterile H.8, H.32, H.33 

5020-025 MicroChoice, Handpiece, High Speed Drill, Electric, stainless steel, non-sterile H.8, H.32 

5020-021 MicroChoice, Handpiece, Medium Speed Drill, Electric, stainless steel, non-sterile H.8, H.32 

5020-024 MicroChoice, Handpiece, Oscillating Saw, Electric, stainless steel, non-sterile H.8, H.52 

5020-022 MicroChoice, Handpiece, Sagittal Saw, Electric, stainless steel, non-sterile H.8, H.42, H.45, H.46 

MC9840 MicroChoice, Handpiece, Small Hub Shaver H.8, H.28, H.29, H.30, H.31 

U100 Micro-Driver , Handpiece, Pneumatic, stainless steel/aluminum, weight 3.25 oz (92.1g), non-sterile H.17 






























K120 Mini-Driver, Attachment, Sagittal Saw, stainless steel, can only be used with pneumatic handpiece, non-sterile H.34, H.49 

K220 Mini-Driver, Attachment, Sagittal Saw, stainless steel, non-sterile H.50 

K200 Mini-Driver, Handpiece, Pneumatic, stainless steel, weight 502.0 g, non-sterile H.17, H.49 

5020-058 MicroChoice ® , Accessory, Replacement Handpiece Lever H.8 

5020-057 MicroChoice, Accessory, Replacement Safe Slide H.8 

PRO5200 PowerPro ® Battery 2 Trigger Full Function Handpiece H.10, H.11 

PRO5250 PowerPro Battery 2 Trigger Standard Handpiece H.11 

PRO3600 PowerPro Battery Charger H.12, H.14 

PRO3205 PowerPro Battery Disposable Filter H.14 

PRO5100 PowerPro Battery Handpiece H.10, H.11 

PRO5300 PowerPro Battery Oscillator H.10, H.36, H.37 

PRO3010 PowerPro Battery Standard Large Battery H.10, H.12, H.13 

PRO3020 PowerPro Battery Standard Small Battery H.10, H.12, H.13, H.14 

PRO6100 PowerPro Electric II Modular Handpiece H.9, H.11 

PRO6125 PowerPro Electric II Ocillating Saw Handpiece H.9, H.36, H.37 

PRO3135 PowerPro Sterile Battery Platform H.12, H.14 

PRO3115 PowerPro Sterile Transfer Battery Large H.12, H.13, H.14 

PRO3130 PowerPro Sterile Transfer Battery Shroud H.13 

PRO5090 PowerPro Sterilization Case H.14 

PRO3200 PowerPro Surecharge Case H.12, H.14 

PRO3110 PowerPro Transfer Battery Case H.13, H.14 





PRO2032 PowerPro, Attachment, Pindriver H.11 

PRO2043 PowerPro, Attachment, Sagittal Saw H.12 

PRO2028 PowerPro, Attachment, Wiredriver H.11 

PRO2046 PowerPro, Attachment, Zimmer/Hudson H.12 

PRO5032 PowerPro, Battery Pin Driver H.11 

PRO5028 PowerPro, Battery Wire Driver H.11 

PRO6032 PowerPro, Electric II, Attachment, Pin Driver H.11 

PRO6028 PowerPro, Electric II, Attachment, Wire Driver H.11 

PRO2200E PowerPro, Handpiece, Two-Trigger, Electric H.9, H.11 

8730 Screw Drill Set, for Patella Tendon Graft Guides H.34 

5067-002 Series 4 ® , Handpiece, Oscillating Saw, Pneumatic, without hose H.15, H.36, H.37, H.38 

5067-004 Series 4, Handpiece, Trauma Drill, Pneumatic, without hose H.15 

5058-001 Surgairtome Two ® Handpiece, without hose H.8, H.32 

8733 Twist Drill, 2.0mm H.34 



1368-008 VersipowerPlus ® /Series 4, Adapter, Trinkle to 1/4" Jacobs, long H.15 

1368-010 VersipowerPlus/Series 4, Adapter, Trinkle to 1/4" Jacobs, short H.15 

1368-005 VersipowerPlus/Series 4, Adapter, Trinkle to 5/32" Jacobs H.15 

1384-078 VersipowerPlus/Series 4, Adapter, Trinkle to Zimmer H.15 

5040-011 VersipowerPlus/Series 4, Adapter, Trinkle Wiredriver H.15 

5052-019 VersipowerPlus/Series 4, Adapter, Two-Way Pin Driver, Trinkle H.15 


Notes 


Notes 


Notes 


11311 Concept Boulevard, Largo, Florida 33773-4908 

Phone: (727) 392-6464 

Customer Service: (800) 237-0169 

USA Fax: (727) 399-5256 

International Fax: (727) 397-4540 

www.linvatec.com 

©2001, 2003 Linvatec Corporation, All rights reserved. 

10/03 CCA 9019 Rev. 1

arthroscopy power

Create successful ePaper yourself

Delete template?

Save as template?